East West Furniture BDETRNA User manual

Denison Wooden Rectangular Table
- 1 -
ASSEMBLY INSTRUCTIONS
SKU:BDETRNA
Description : Denison Wooden Rectangular Table
Dimension : 72”.L x 40”.W x 30”.H
Cube Size : 74.4” x 42.5” x 4.7”
NW: 50.7 LBS
GW: 66 LBS
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time
to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
Email: [e-mail]
175 Southbelt Industrial Drive,
Houston, TX 77047

Denison Wooden Rectangular Table
- 2 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Leg 2
C Leg 2 D Cross bar 2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following
hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Wood Screw
(M7x70) 62 Wood Screw
(M7x60) 2
3
Bolt
(M8x35)
8 4 Nut 8
STEP 1
Attach Legs (B) and (C) to the Cross bar (D) using Allen Screw (1) and Allen Key (5). Do not fully tighten all Allen Screws.
ESupportbar2
5 Allen key
(M4mm) 2
5
1
B
C
C
B
D
D

Denison Wooden Rectangular Table
- 3 -
STEP 2
Attach Leg frame to Top (A) using Bolt (3), Nut (4) and Allen key (5). Fully tighten all Allen Screws and Bolts
STEP 3
Attach Support bar (E) to Cross bar (D) and Top (A) using Allen Screw (1), (2) and Allen key (5) .
Fully tighten all Allen screws.
5
4
4
3
3
A
5 2
5
1
E
E
D
D
A