East West Furniture XB72 User manual

X-Style72inlongDiningBench
-1-
ASSEMBLYINSTRUCTIONS
SKU: XB72
Description: X-Style72inlongDiningBench
Product Dimension:72"W x15"Dx18"H
CubeSize:74.7IN x17.5INx2.9INNW:22LBS
(TOP)GW:26.4LBS
CubeSize:55.8IN x3.9IN x1.5 INNW:5.5LBS
(CROSSBAR)GW:6.6 LBS
CubeSize:20INx16.7INx4.7INNW:4.4LBS
(LEG)GW:6.6 LBS
175SouthbeltIndustrialDr,
Houston,TX77047
Email:[e-mail]

X-Style72inlongDiningBench
-2-
BEFOREASSEMBLY
Thankyouforpurchasingthisqualityproduct. Thisproducthasbeendesignedforeasyassembly and constructedfordurability.Pleasetakethetimetoreadand
followthe assembly instructionscarefully.
Be suretocheck allpackingmaterialcarefully forsmallpartswhichmayhave comelooseinsidethecartonduringshipment. Pleaseseparate,identify,and count
allpartsandmetalhardware.Compare with partlistto be sure allpartsare present.
If hardwareismissingoryouhave difficultyassemblingthisproduct,pleasecallforus.
IMPORTANT NOTE:
-Place all woodenpartsona cleanandsmooth surface suchasarugorcarpetto avoidthe partsfrombeingscratched.
-Remove all wrappingmaterial,includingstaples&packingstrapsbefore youstartto assemble.
-DONOTtightenall screwsand boltsuntilcompletelyassembled.
-Keepallhardware partsoutof reach of children.
PARTLIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing, please make sureyouhave thefollowingparts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A Top 1 B Table Leg 2
C Cross bar 1 D Snapleg 2
HARDWARELIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing,please make sureyouhave all ofthefollowinghardware:
NO Description Qty Sketch NO Description Qty Sketch
1 LongBolt
(M6x50) 4 2 ShortBolt (M6x35) 8
3 Lockwasher
(Φ6.5xΦ9mm) 8 4 FlatWasher (Φ6.5xΦ19mm) 8
5 Allenkey
(M4mm) 1
STEP1
Attach legs (B)tothe Cross bar(C) withBolts (1).Tighten withthe Allen Key(5).
Note:DONOTtightenanyof the bolts, until thechairis assembled.

X-Style72inlongDiningBench
-3-
STEP2
Attach legs (onstep 1) to theTop(A)with Bolts (2)andwashers (3), (4). Tightenwith theAllen Key(5).
Note:Tightenthe all boltsontheStep 1.Then Attach Snaplegs (D)tothe Legs.