East West Furniture SION PARSON CHAIR SIP User manual

SION PARSON CHAIR
-1-
ASSEMBLY INSTRUCTIONS
SKU: SIP
Description : SION PARSON CHAIR
Product Dimension : 19.5”Wx21.5"Dx35.5"H
Cube Size : 45.4”x21.6”x10.2”
NW : 33 LBS
GW: 39.6 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[email protected]

SION PARSON CHAIR
-2-
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long-
lasting use. Please take the time to read and follow the assembly instructions carefully
Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present.
If the hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps, before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(M6x60mm)
4
2
Medium bolt
(M6x50mm)
4
3
Short bolt
(M6x40mm)
2
4
Lock Washer
(∅6.5x∅9)
10
5
Flat Washer
(∅6.5x∅19)
10
6
Allen Key
(4mm)
1
7
Dowel
(∅10x30)
2
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Chair back
1
B
Seat Frame
1
C
Front Leg
2
D
Back Leg
2

SION PARSON CHAIR
-3-
Remove the bottom cover out of the seat frame (B), as shown below, then attaching Dowel (7) to seat
frame (B).
Attach front legs (C) to the seat frame (B). Use bolts (1), washers (4), and (5). Tighten with Allen Key (6).
STEP 1
STEP 2
B
7

SION PARSON CHAIR
-4-
Attach Back Legs (D) to the chair back (A) by using bolts (2) and washers (4) and (5). Tighten with
Allen Key (6).
Note: DO NOT tighten any of the bolts until the chair assembled with all parts.
`
Attach seat frame (B) to the chair back (A) by using bolts (3) and washers (4) and (5). Tighten with
Allen Key (6).
STEP 3
STEP 4
6
5
A
D

SION PARSON CHAIR
-5-
Place the chair on a flat level surface to make sure the chair is level and then tighten all bolts.
Attach the bottom cover (removed on step 1) back on the seat frame and finish the assembly.
STEP 5
STEP 6