East West Furniture Sudbury Round Kitchen Table With Two Shelves User manual

Sudbury Round Kitchen Table With Two Shelves
- 1 -
ASSEMBLY INSTRUCTIONS
SKU:SUT
Description : Sudbury Round Kitchen Table With Two Shelves
Dimension : ∅42”x29”1/2.H
Cube Size : 44.4”x44.4x6.2” NW: 52.8 LBS
GW: 59.4 LBS
175 Southbelt Industrial Dr
Houston, TX 77047
Email: inf[email protected]

Sudbury Round Kitchen Table With Two Shelves
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Table Leg
4
S1
Shelf-1
1
S2
Shelf-2
1

Sudbury Round Kitchen Table With Two Shelves
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Bolt
(M8x70)
8
2
Lock washer
(8.5x11mm)
8
3
Flat Washer
(8.5x19m)
8
4
Allen key
(M4mm)
1
5
Screw
(M4x35)
8
STEP 1
Attach two legs (B) to the top (A) with Bolts (1) and washers (2), (3). Tighten with the Allen Key (4).

Sudbury Round Kitchen Table With Two Shelves
- 4 -
STEP 2
Attach two shelf (S1) and shelf (S2) to the legs (B) later attach two the other legs to the top (A) and shelf
with Bolts (1) and washers (2), (3). Tighten with the Allen Key (4). use the screw driver to tighten the
screws (5). as shown below