East West Furniture HLC-C User manual

-
1
-
HARTLAND CHAIR WITH MICROFIBER UPHOLSTERED SEAT
ASSEMBLY INSTRUCTIONS
SKU: HLC-C
Description : HARTLAND CHAIR WITH MICROFIBER UPHOLSTERED SEAT
Di ension : W.17”1/2xD.21”xH.38”
Cube Size : 40.1”x18.8”x9.1” NW: 30.8 LBS
GW: 35.2 LBS
175 Southbelt Industrial Dr
Houston, TX 77047
Email: [e-mail]

-
2
-
HARTLAND CHAIR WITH MICROFIBER UPHOLSTERED SEAT
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy asse bly and
constructed for durability. Please take the ti e to read and follow the asse bly instructions carefully.
Be sure to check all packing aterial carefully for s all parts which ay have co e loose inside the carton
during ship ent. Please separate, identify, and count all parts and etal hardware. Co pare with part list to be
sure all parts are present.
If hardware is issing or you have difficulty asse bling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and s ooth surface such as a rug or carpet to avoid the parts fro
being scratched.
- Re ove all wrapping aterial, including staples & packing straps before you start to asse ble.
- DO NOT tighten all screws and bolts until co pletely asse bled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please ake sure you have the following parts:
N
O
D
e
s
c
r
i
p
t
i
o
n
Q
t
y
S
k
etc
h
N
O
D
e
s
c
r
i
p
t
i
o
n
Q
t
y
S
k
etc
h
A
Chair back 1 B Cushion Seat 1
C
Front fra e
1 D-L
Side Rail
1
E
Support bar
1
D-R
1
F
Side
stretcher
(L-R)
2

-
3
-
HARTLAND CHAIR WITH MICROFIBER UPHOLSTERED SEAT
ARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before
continuing, please ake sure you have all of the following hardware:
N
O
D
e
s
c
r
i
p
t
i
o
n
Q
t
y
S
k
etc
h
N
O
D
e
s
c
r
i
p
t
i
o
n
Q
t
y
S
k
etc
h
1
Bolt
(M6x45 )
6
2
Flat Washer
(ɸ6.5x13 )
4
3
Lock Washer
(ɸ6.5x9 )
4 4
Curve Washer
2
5
Allen Key
(4 )
1
6
Short Screw
(M5x30 )
7
7
Long Screw
(M4x35 )
4
STEP 1
Attach Side Rail (D-L) and (D-R) to the Back (A) with Bolts (1), and Washers (2) and (3). Tighten with
the Allen Key (5)
Note: DO NOT fully tighten any of the bolts, until the chair is asse bled, then put on a flat
level surface to ake sure the chair is level and then tighten the bolts.
D-L
D-R
A
5

-
4
-
HARTLAND CHAIR WITH MICROFIBER UPHOLSTERED SEAT
STEP 2
Attach Front fra e (C) to Side Rail (fro Step 1) with bolts (1) and Curve Washers (4). Tighten with the
Allen Key (5). Place side stretchers (F) between front and back legs use the screw driver to tighten
the screws (7). Attach support bar (E) to side aprons as drawing.
Note: DO NOT tighten an of the bolts, until Place side stretcher (F) between front and back legs the chair is assembled, then
tighten the bolts and the screws.
x4
x2
C
5
STEP 3
Attach the Seat (B) to top of the seat fra e (fro Step 2) by using Screws (6). Tighten with a screw
driver.