East West Furniture XT72 User manual

X-Style40x72inDining Table
-1-
ASSEMBLYINSTRUCTIONS
SKU: XT72
Description:X-Style 40X72 in DiningTable
Product Dimension:"40.W x72"Lx30"H
CubeSize:74.9IN x42.8INx3.5INNW:81.4 LBS
(TOP)GW:90.2LBS
CubeSize:47.4IN x3.9IN x1.5 INNW:6.6LBS
(CROSSBAR)GW:7.7 LBS
CubeSize:36INx32 INx5.3 IN NW:19.8 LBS
(LEG)GW:25.3LBS
BEFOREASSEMBLY
Thankyouforpurchasingthisqualityproduct. Thisproducthasbeendesignedforeasyassembly and constructedfordurability.Pleasetakethetimetoreadand
followthe assembly instructionscarefully.
Be suretocheck allpackingmaterialcarefully forsmallpartswhichmayhave comelooseinsidethecartonduringshipment. Pleaseseparate,identify,and count
allpartsandmetalhardware.Compare with partlistto be sure allpartsare present.
If hardwareismissingoryouhave difficultyassemblingthisproduct,pleasecallforus.
175SouthbeltIndustrialDr,
Houston,TX77047
Email:[e-mail]

X-Style40x72inDining Table
-2-
IMPORTANT NOTE:
-Place all woodenpartsona cleanandsmooth surface suchasarugorcarpetto avoidthe partsfrombeingscratched.
-Remove all wrappingmaterial,includingstaples&packingstrapsbefore youstartto assemble.
-DONOTtightenall screwsand boltsuntilcompletelyassembled.
-Keepallhardware partsoutof reach of children.
PARTLIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing,please make sureyouhave thefollowingparts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Leg 2
C Cross bar 1 D Snapleg 2
HARDWARELIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing, please make sureyouhave all ofthefollowinghardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Bolt
(M6x50) 16 2 Lockwasher
(Φ6.5xΦ9mm) 12
3 FlatWasher
(Φ6.5xΦ19mm) 12
4 Allenkey
(M4mm) 1
STEP
1
Attach legs (B)tothe Cross bar(C) withBolts (1).Tighten withthe Allen Key(4).
Note:DONOTtightenanyof the bolts, until theTableis assembled.

X-Style40x72inDining Table
-3-
STEP2
Attach legs (onStep1)totheTop (A)with Bolts (1)and washers (2), (3). Tighten withtheAllenKey(4).
Note:Tightenthe all boltsontheStep 1.Then Attach Snaplegs (D)tothe Legs.