East West Furniture DOT User manual

DOVER TABLE WITH 18" BUTTERFLY LEAF
-1 -
ASSEMBLY INSTRUCTIONS
SKU:DOT
Description
Dimension
Cue size
:
DOVER TABLE WITH 18" BUTTERFLY LEAF
: 42"Wx60"/78"Dx30"H
: 62.5”x45.4”x6.9”
NW
:
118.8
LBS
GW : 129.8 LBS
175 Southbelt Industrial Dr
Houston, TX 77047
Email: [e-mail]

DOVER TABLE WITH 18" BUTTERFLY LEAF
- 2 -
BEFORE ASSEMBLY
Thank you for purchas ng th s Wh tewood Industr es Inc.’s qual ty product. Th s product has been des gned for easy assembly and
constructed for durab l ty. Please take the t me to read and follow the assembly nstruct ons carefully.
Be sure to check all pack ng mater al carefully for small parts, wh ch may have come loose ns de the carton dur ng sh pment. Please
separate, dent fy, and count all parts and metal hardware. Compare w th part l st to be sure all parts are present.
If hardware s m ss ng or you have d ff culty assembl ng th s product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avo d the parts from be ng scratched.
-Remove all wrapp ng mater al, nclud ng staples & pack ng straps before you start to assemble.
-DO NOT t ghten all screws, bolts unt l all completely assembled.
-Keep all hardware parts out of reach of ch ldren
PART LIST
When unpack ng, please carefully not to d scard any parts w th the packag ng. Before cont nu ng, please make sure you have all of
the follow ng parts:
NO Description Qty Sketc NO Description Qty Sketc
A Top 1 B Leg 4
HARDWARE LIST
When unpack ng, please carefully not to d scard any parts w th the packag ng. Before cont nu ng, please make sure you have all of
the follow ng hardware:
NO Description Qty Sketc NO Description Qty Sketc
1 bolt
(M8x70mm) 8
2
Lock washer
(Φ8.5xΦ13mm)
8
3
Flat washer
(Φ8.5xΦ19mm)
8 4 Allen key
(4mm) 1

DOVER TABLE WITH 18" BUTTERFLY LEAF
- 3 -
STEP 1
Place legs (B) n pos t on as shown below. Use bolts (1) and washers (2),(3) to attach legs, t ghten w th the Allen key
(4).
STEP 2
Unlacth 2 end p eces of table top by the latches underneath table top. Pull the 2 ends of the
table top apart.

DOVER TABLE WITH 18" BUTTERFLY LEAF
- 4 -
STEP 3
Unfold the butterfly leaf w th the apron at both ends stra ghtened up as shown on the Step 3.
Place flattened butterfly leaf at the center of the table. Then push two end p eces nward
mak ng sure all p ns & holes al gned. Latch them together by the 4 latches underneath table top