East West Furniture DUBLIN DLT User manual

DUBLIN ROUND TABLE WITH 2 DROP LEAVES
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: DLT
Description : DUBLIN ROUND TABLE WITH 2 DROP LEAVES
Dimension : Ф42”x29”1/2.H
Cube Size : 44”x26.7”x3.1” NW: 28.6 LBS
(TOP) GW: 31 LBS
Cube Size : 25.5”x9”x6” NW: 12.1 LBS
(PEDESTAL) GW: 14 LBS
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read
and follow the assembly instructions carefully.
250 Canal Street,
Lawrence, MA 01840
Email: [e-mail]

DUBLIN ROUND TABLE WITH 2 DROP LEAVES
- 2 -
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and
count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Leg
4
C
Pedestal
1
D
Mounting
plate
1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the
following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Large flat
washer
(Bag 2)
(8.5x19mm)
4
2
Large lock
washer
(Bag 2)
(8.5x11mm)
4
3
Hexagon nut
(bag 2)
(M8x13mm)
4
4
Wrench
(Bag 2)
(M13mm)
1
5
Small flat
washer
(bag 2)
(6.5x13mm)
4
6
Small lock
washer
(Bag 2)
(6.5x9mm)
12
7
Bolt
(Bag 2)
(M6x48mm)
12
8
Medium flat
washer
(Bag 2)
(6.5x16mm)
8
9
Allen key
(Bag 2)
(M4)
1
10
Screw
M3.5x20
(Bag 1)
4
11
Plastic
(Bag 1)
2
Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4).
STEP1
Hardware Bag 1
Hardware Bag 2

DUBLIN ROUND TABLE WITH 2 DROP LEAVES
- 3 -
x4
C
B
12
3
4
STEP 2
Put the Mounting plate (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with Allen
key (9).
6
5
7
9
D
x4
Please remove Hardware Bag 1 as shown below.
STEP 3
Remove
Hardware bag 1

DUBLIN ROUND TABLE WITH 2 DROP LEAVES
- 4 -
STEP 4
Attach plastic(11) to the top (A). use the screw driver to tighten the screws (10) as shown below.
STEP 5
Carefully place the frame (from Step 2) on bottom side of the table top (A), with bolts (7), washers (8), (6).
Tighten with Allen key (9).
6
8
7
9
A
x8
A
X4
10
11