Eastman Outdoors 38262 User manual

Eastman Outdoors, LLC.
3476 Eastman Drive
Flushing, MI 48433
800-241-4833
www.eastmanoutdoors.com
Revision date: 3/2017

Meat Grinder
Before operating, be sure
to read and understand
instructions completely.
Failure to follow the
safety rules and other
basic safety precautions
may result in serious
personal injury.
Instructions and Care
Model: 38262
Eastman Outdoors, LLC.
HOUSEHOLD USE ONLY
Input: 120VAC, 60 Hz
Output: 400 Watts Running
1000 Watts Peak

Important Safeguards
This product is designed for indoor household use only
To avoid serious injury or death, malfunction or
damage to property use the appliance only for its
intended use and always follow the Instructions.
When using this electrical appliance, safety precautions should always
be observed, including the following:
1. Read all of the instructions carefully even if you are familiar with the
appliance.
2. To protect against risk of electrical shock, do not put the meat grinder in
water or other liquid or in an area where there may be ooding.
3. Close supervision is necessary when this appliance is used by or near
children. This appliance is not recommended for children.
4. Never leave this appliance unattended when in use.
5. Switch off and unplug from outlet when not in use, before putting on or
taking off parts and before cleaning.
6. Do not abuse the cord. Never carry the appliance by the cord or yank it to
disconnect from the outlet. Instead, grasp the plug and pull to disconnect.
7. The appliance should always be in the OFF position before inserting or
removing the plug from a wall outlet.
8. Do not operate any appliance with a damaged cord, plug or after the
appliance malfunctions or if it is dropped or damaged in any manner.
Return the appliance to the nearest authorized service facility for
examination or repair or electrical or mechanical adjustment.
9. Using attachments not recommended or sold by the manufacturer may
cause re, electric shock or injury.
10. Do not let cord hang over the edge of the table or counter. Do not let cord
come in contact with hot surfaces including the stove.
11. Do not use an extension cord with this appliance, however if one is used, it
must have a rating equal to or exceeding the rating of this appliance.
12. Do not operate or place any part of this appliance on or near hot surfaces
such as a hot gas or electric burner, in an oven or in a dishwasher.
13. Do not use outdoors.
14. Do not grind hard foods such as bones and nuts. Do not grind ginger or
other materials with hard ber.
15. Avoid contact with moving parts. Never feed food by hand. Always use
the food pusher. Keep hair, hands, clothing and utensils away from moving
parts while operating to reduce the risk of personal injury and/or damage to
the meat grinder.
16. Do not use ngers to scrape food away from discharge disc while
appliance is operating. Injury may result. CAUTION: DO NOT PUT YOUR
FINGERS NEAR THE HOPPER TRAY OR GRINDER HOUSING WHILE IN
OPERATION.
2
WARNING

Contents
Important Safeguards (Cont.)
Important Safeguards 2-3
Parts List 4
Service 4
Grinder Care 4-5
Precautions While Grinding 5-6
Assembling Your Grinder 6-11
Brats, Sausages, and Freezer Bags 11-12
Clearing Jams Using the Reverse Function 13
One Year Limited Warranty 14
Other Eastman Outdoors®Accessories 15
3
17. WARNING: The cutting blade is sharp. Handle with care when using and
cleaning.
18. When carrying the meat grinder, be sure to hold the Main Housing with both
hands. Do not hold only the Hopper Tray.
19. If the motor stalls, turn off immediately and unplug the unit. To avoid injury,
rst detach Grinder Housing then disassemble and remove clogged pieces.
20. To avoid jamming or motor stalling, do not apply excessive pressure while
operating. Do not operate continuously for more than 20 minutes.
21. Never try to repair the appliance by yourself; instead, take it to an authorized
service facility for repair.
22. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised by or given instruction concerning
the use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
NOTE: This appliance has a polarized plug (one blade wider than the other). To
reduce the risk of electrical shock, this plug will t on a polarized outlet only one
way. If the plug does not t fully into the outlet, reverse the plug. If it still does not
t, contact a qualied electrician. Do not attempt to defeat this safety feature.
Short Cord Instructions – a short power supply cord is provided to reduce the risk
resulting from becoming entangled in or tripping over a longer cord. Extension
cords may be used if care is exercised in their use. If an extension cord is
used, the marked electrical rating of the cord should be at least as great as the
electrical rating of the appliance. The longer cord should be arranged so that it
will not drape over the tabletop where it can be pulled on by children or tripped
over unintentionally.

4
Grinder Care
Parts List
1. Hopper Tray 9. Fine Cutting Plate (smallest holes)
2. Main Housing 10. Medium Cutting Plate (medium holes)
3. ON/OFF/ Reverse Switch 11. Coarse Cutting Plate (largest holes)
4. Head Inlet hole 12. Locking Nut
5. Locking Knob 13. Cutting Blade
6. Food Pusher 14. Small and Medium Sausage Stuffer Nozzle
7. Grinder Housing 15. Food Storage Bag Filling Nozzle
8. Feed Screw 16. Reset Switch
Service
There are no user serviceable parts. Should you experience any
problems with your grinder, please call Eastman Outdoors Customer
Service at 1-800-241-4833.
Unpacking and Before First Use
Carefully unpack the grinder and accessory parts. Wash all parts
except the main housing in warm soapy water, rinse clean, and dry
thoroughly. Do not use any other cleaning chemicals.
1
2
3
4
5
6
7
8
11
12
13
14
15
16
10
9

5
Precautions While Grinding
Clean the main housing with a wet towel soaked in warm water and do
not use any type of a cleaning chemical on the base.
Main Housing
Your grinder’s Main Housing contains all of the moving mechanical parts
and electrical components so use proper care when cleaning. Make
sure that the Main Housing is unplugged from the outlet before cleaning.
Clean the Main Housing with a wet towel soaked in warm water. Do not
use any type of a cleaning chemical on the Main Housing.
Do not immerse the Main Housing in water or any
other liquid. Failure to follow this warning may
result in electric shock, injury, or even death.
Metal and Plastic Parts of the Grinder
Wash the metal Grinder Housing, Locking Nut, Hopper Plate, Feed
Screw, and Cutting Plate in warm soapy water. All plastic accessories
are also to be washed warm soapy water. Rinse, clean and dry
thoroughly. The Cutting Plates and Blade are stainless steel and can
be washed in the dishwasher. No other parts should be washed in the
dishwasher. For storage you can apply a light coat of vegetable oil to
any or all of the metal parts. Wash all parts before the next use.
Follow these safety precautions while using your grinder or while
handling food:
Do not use ngers to scrape food away from
the discharge disc (Locking Nut area) while the
appliance is operating. Failure to follow may
result in cut type injuries. Avoid contacting
moving parts. Never feed food into the grinder’s
head by hand. Always use the food pusher.
• Wash hands thoroughly prior to handling any food.
• Make sure all utensils, containers, and counter tops are thoroughly
cleaned and disinfected before using.
• Thoroughly clean and disinfect all cutting boards, wooden or plastic
• Before plugging in the grinder, make sure the switch is in the OFF
position
• After grinding, store ground items in refrigerator or freezer.
WARNING
WARNING

6
Precautions While Grinding (cont.)
• Do not grind hard foods such as bones and nuts.
• Do not grind ginger and other materials with hard ber.
• To avoid jamming, do not force to operate the unit with excessive
pressure.
• If the unit jams due to hard materials getting lodged in the Feed Screw
or Cutting Blade, switch off immediately, unplug and clean the unit.
Assembling Your Grinder
Make sure that the Main Housing is unplugged
while assembling or disassembling any part of
this appliance. Failure to follow this warning may
result in electric shock, injury, or even death.
To avoid serious injury or death, malfunction or
damage to property use the appliance only for its
intended use and always follow the Instructions.
Quick Start Guide
Grinding Meat
WARNING

7
Stufng Sausages and Hot Dogs
Protecting Metal Parts
Use vegetable or salad oil to lightly coat metal parts. Thoroughly
wash all parts after storage and before use.

Assemble Grinder Housing to Main Housing
Step 1 - Make sure unit is unplugged and in the off position.
Fully insert the Grinder Housing into the front opening of the Main
Housing. Secure the Grinder Housing to the Main Housing with the
Locking Knob. Rotate the Locking Knob in the clockwise direction to
tighten. Hand tighten only. Do not use a wrench (Figure 1).
Assemble Feed Screw into the Grinder Housing
Insert Feed Screw into the front opening of the Head (Figure 2a and
2b). Insure that the end of the Feed Screw lines up correctly with the
drive shaft inside the Grinder Housing. Once properly lined up the
Feed Screw can be fully pushed into the Grinder Housing (Figure 3).
8
Insert this end of the Feed Screw into
the Grinder Housing
Figure 1
Figure 2a
Figure 2b Figure 3

Assemble Cutting Blade to Feed Screw
First orient the Cutting Blade so that the cutting edge (at side of the
Cutting Blade) is facing away from the Feed Screw and then slide the
Cutting Blade onto the Feed Screw. Insure that the square opening
of the Cutting Blade ts over the square shaft of the Feed Screw.
Once properly lined up, the Cutting Blade can be fully pushed onto
the Feed Screw (Figure 4a and 4b).
Assemble Cutting Plate to Grinder Housing
Push the Cutting Plate onto the front opening of the Grinder Housing.
Rotate the plate until the outer tabs line up with the slots in the
Grinder Housing. Once the Cutting Plate is properly lined up, the
Cutting Plate can then be fully pushed onto the Grinder Housing
(Figure 5a and 5b).
Note: Insure that the tabs on the Cutting Plate are properly lined up
with the slots in the Grinder Housing (Figure 5b).
9
Figure 4a
Figure 5a
Figure 4b
Figure 5b

10
Cutting Plate Suggestions
Coarse Plate: Most ground meats and sausages or brats with a more
coarse meat texture
Medium Plate: Most ground meats and breakfast links or sausages
and brats with a less coarse meat texture
Fine Plate: Purées and ground meats for hot dogs
Assemble Locking Nut onto Grinder Housing
Screw the Locking Nut onto the Grinder Housing to hold all parts
securely in the Grinder Housing. Turn the Locking Nut clockwise to
tighten. Hand tighten only. Do not use a wrench (Figure 6).
Assemble Hopper Tray onto Grinder Housing
Fit the Hopper Tray onto the top of the Grinder Housing. Press into
place rmly (Figure 7).
Figure 6
Figure 7

11
Grinding Meat
Avoid contacting moving parts with your
hands, loose clothing, or hair. Never feed
food into the grinder’s head by hand.
Always use the food pusher. Failure to
follow this warning may result in severe
injury, or even death.
Cube your meat into small pieces approximately 1 to 1-1/2 in. square
and place the cubed meat onto the top tray of the Hopper Tray.
Place a bowl or plate under the front of the Grinder Housing to catch
the discharged ground meat. Plug in the Main Housing and then turn
the switch to the ON setting. Use the Food Pusher to rmly press
the meat downward into the Grinder Housing. Do not press so hard
as to stall the grinder. Add additional cubed meat to the Hopper Tray
as needed and carefully watch the bowl or plate to insure that it does
not overspill with ground meat. Once the bowl or plate is full, turn
off the grinder. Remove the ground meat from the bowl or plate and
store in a clean container in the refrigerator or freezer (Figure 8).
Figure 8
Use the Food Pusher to rmly press
the meat downward into the Grinder
Housing. DO NOT USE YOUR
HANDS TO PUSH FOOD INTO
THE GRINDER.
WARNING
Brats, Sausages and Freezer Bags
Make sure that the Main Housing is unplugged
while assembling or disassembling any part of
this appliance.
Avoid contacting moving parts with your hands,
loose clothing, or hair. Never feed food into the
grinder’s head by hand. Always use the food
pusher. Failure to follow these warnings may
result in severe injury, or even death.
Grind and Marinate
Follow the procedure described for Grinding Meat and once you have a
sufcient amount of ground meat, add the delicious Eastman Outdoors®
WARNING

12
The Eastman Outdoors Variety Sausage Kit is a perfect choice when
making a variety of sausages as it comes with both the seasonings
as well as the casings. After following the soaking directions on the
casings, lay them out in front of the Grinder Housing and place one end
of the casing over the stufng nozzle. Place the meat that was already
ground and combined with the seasoning mix onto the Hopper Tray.
Plug in the Grinder and then turn it on. Use the Food Pusher to gently
press the ground meat mixture downward into the Grinder Housing. Do
not press so hard as to stall the grinder. Allow the meat to be dispensed
into the casing and as the casing lls with meat to your desired sausage,
brat or hot dog length then turn the grinder off. Twist the casing several
times to lock the meat in individual sausages. Turn the grinder back on
to ll another length of casing and repeat the twisting procedure until the
full length of casing is lled with meat.
Figure 9 Coarse Cutting Plate, Cutting Blade, and Feed Screw
Small or medium sausage stuffer nozzle and collarLocking nut
Assemble either the small or
medium sausage stufng nozzle
over the coarse cutting plate.
Then screw the locking nut
onto the grinder housing to hold
everything together.
STUFFING CASING FOR BRATS, SAUSAGE AND HOT DOGS
sausage seasonings or your own sausage recipe and marinade for 4 to 8 hours
in the refrigerator before making sausage, brats, or hot dogs. The longer the meat
marinates, the more avorful the stuffed product.
Assemble Grinder for Stufng
Following the section Assembling Your Grinder, assemble the grinder with the
cutting blade and with the coarse cutting plate. Using any other size cutting
plate will result in further reducing the size of your ground meat. Prior to screwing
on the locking nut, assemble the small or medium sausage stuffer nozzle and
collar over the top of the coarse cutting plate. Use the medium nozzle for brats
and the small nozzle for breakfast links or other sausages and for hot dogs
(Figure 9).

13
FILLING FOOD STORAGE BAGS
CLEARING JAMS USING THE REVERSE FUNCITON
CLEANING THE DELUXE ELECTRIC MEAT GRINDER
Your grinder comes with a Nozzle for lling food storage bags. You can
grind your meat and funnel it directly into the bags by placing the largest
Nozzle on after the Cutting Plate of your choice and before the Locking Nut.
For best result, place the food storage bag over the Nozzle with the end of
the Nozzle as far into the food storage bag. As the bag lls with meat all the
bag to lower until it is lled to the top.
There is a safety feature built into your Eastman Outdoors Deluxe
Electric Meat Grinder that will either stop the motor from working or the
machine from grinding automatically if a jam occurs. Should this happen,
immediately shut off and unplug the machine. Remove the Locking Nut, the
Cutting Plate and the Cutting Blade and remove the debris that has caused
the jam. Allow several minutes before attempting to push the reset button
(in some circumstances up to 30 minutes may be needed). To resume use,
press the reset button located on the bottom of the unit as shown in
(Figure 10).
After use, turn the machine off and unplug it from the wall outlet. Remove
the Locking Nut, Cutting Plate, Cutting Blade and Feed Screw. Remove
the Locking Knob and then the Grinder Housing. Wipe the Main Housing
with a soft cloth dampened with warm water and dry thoroughly. Wash the
remaining items in hot, soapy water, rinse and dry thoroughly. The Cutting
Plates and Blade are stainless steel and may be washed in the dishwasher.
The plastic Nozzles can also be washed in the dishwasher on the top rack
or using a no-heat dry setting. No other parts should be washed in the
dishwasher. For storage you can apply a light coat of vegetable oil to any or
all of the metal parts.
Figure 10
Reset Button

At Eastman Outdoors, LLC., we sell the safest and highest quality
products available. We are condent that you will enjoy years of
dependable service from your new Eastman Outdoors®product. If you
ever have questions or concerns regarding any Eastman Outdoors®
products, call Eastman Outdoors' Customer Service department at
1-800-241-4833 or visit our website at www.eastmanoutdoors.com
Standard Limited Warranty
LIMITED WARRANTY: This Eastman Outdoors®product is warranted
against defects in material and workmanship for one year following its
date of purchase by the original purchaser, provided the product is used
in accordance with Eastman Outdoors’ printed instructions. Eastman
Outdoors, LLC. warrants that the enclosed hardware (where applicable)
is free from physical defects for a period of one year from the original
date of retail purchase. This warranty does not cover damage resulting
from abuse, improper use, user negligence or accident, or normal wear.
Eastman Outdoors, LLC. entire liability and your EXCLUSIVE REMEDY
if product is defective in material or workmanship during the warranty
period, is repair or replacement at Eastman Outdoors’s expense. NO
OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL APPLY TO THE PRODUCT.
Eastman Outdoors, LLC. shall not, in any event, be liable for any
incidental or consequential damages, either for breach of this warranty
or any other reason resulting from the use of this product. This warranty
gives you specic legal rights. You may also have other rights that vary
from state to state.
REPAIR PROCEDURES: Eastman Outdoors, LLC. will repair or
replace products not conforming to this limited warranty at no charge.
If you nd a product to be defective, contact the Eastman Outdoors
Customer Service department at 1-800-241-4833 . When you receive
authorization, return the product as directed. Product repairs not covered
by warranty, and product updates, will be provided at a set rate.
LIMITATIONS: This warranty is void if the product is damaged by
improper or abnormal use or by accident; if the product is altered
or modied in any way other than as directed by ofcial Eastman
Outdoors, LLC. instructions; or if any attempt is made to repair the
product without authorization from Eastman Outdoors, LLC. Eastman
Outdoors®products are intended for residential indoor use only.
Eastman Outdoors®products are in all events not suitable, and are not
authorized, for use in any situations that might pose potential injuries to
life and health. This warranty is not assignable or transferable.
EXCEPT AS PROVIDED IN THIS LIMITED WARRANTY, THE
EASTMAN OUTDOORS®PRODUCT IS PROVIDED “AS IS”.
Customer Assistance
One Year Limited Warranty
14

To order any of the Eastman Outdoors products shown above, visit
your local Eastman Outdoors retailer, call Eastman Outdoors Customer
Service at 1-800-241-4833 or visit our website www.eastmanoutdoors.
com. We will be glad to help you with any of your questions or ordering
needs.
Eastman Outdoors®Accessories
15
Food Dehydrator
Freezer Bag / Tape Dispenser
Kit and Rell Kit
Jerky & Sausage
Maker Kit
Jerky & Sausage
Seasoning Packs

Date: 3/2017

Hachoir à viande
Avant d’utiliser l’appareil,
assurez-vous de lire et
de bien comprendre les
instructions. Le fait de
ne pas suivre les règles
de sécurité et de ne pas
prendre les précautions
de base peut avoir comme
conséquences des blessures
graves.
Instructions et entretien
Modèle: 38262
Eastman Outdoors LLC.
USAGE DOMESTIQUE UNIQUEMENT
Puissance d’entrée :
120 Vca, 60 Hz
Sortie : 400 watts en
marche – puissance maximale de 1000
watts

Contenu
Importants conseils de sécurité
Importants conseils de sécurité 2-3
Liste des pièces 4
Service 4
Entretien du hachoir 4-5
Précautions à prendre lorsque vous hachez 5-6
Montage du hachoir 6-11
Saucisses, saucissons et sacs à congélation 12-13
Utilisation de la fonction Reverse pour le déblocage 13
Aide à la clientèle 14
Garantie limitée d’une année 14
Autres accessoires Eastman OutdoorsMD 15
Ce produit est conçu pour une utilisation comme appareil ménager à
l'intérieur seulement
Pour éviter des blessures graves ou la mort, un
mauvais fonctionnement ou des dommages à la
propriété, utilisez l'appareil uniquement pour l'usage
prévu et suivez toujours les instructions.
Lorsque vous utilisez des appareils ménagers électriques, il vous faut prendre
des précautions de base au niveau de la sécurité comme les suivantes:
1. Lisez toutes les instructions an de bien les comprendre avant d'utiliser
l'appareil.
2. Ne laissez pas le hachoir fonctionner sans surveillance en aucun temps.
3. N'utilisez pas vos doigts pour enlever de la nourriture sur le disque
d'évacuation (zone de l'anneau de rétention) lorsque l'appareil est en
marche. Si vous ne suivez pas ces instructions, vous pourriez vous
couper.
4. Évitez de toucher des pièces en mouvement. N'alimentez jamais le
hachoir en vous servant de votre main. Utilisez toujours le poussoir.
5. Ne hachez pas des aliments durs comme les os, les noix, etc. Ne hachez
pas du gingembre ou d'autres aliments dont les bres sont dures.
6. Ne faites pas fonctionner le hachoir plus de 10 minutes à la fois. Si vous
devez l'utiliser plus longtemps, laissez le hachoir refroidir pendant 10
minutes avant de la réutiliser.
7. Laissez le moteur s'arrêter complètement avant de renverser le sens
de marche. Passer à la marche arrière avant que le moteur ne s'arrête
complètement peut endommager le hachoir.
2
AVERTISSEMENT

Mises en garde importantes
8. Lorsque vous transportez le hachoir, assurez-vous de le faire en
supportant le bâti principal à l'aide de vos deux mains. Ne transportez pas
le hachoir par la plaque de la trémie d'alimentation ou la partie supérieure.
9. L'utilisation d'accessoires qui ne sont pas recommandés ou vendus par le
fabricant de cet appareil ménager peut causer un feu, un choc électrique
ou des blessures.
10. Une surveillance attentive est nécessaire lorsqu'un appareil est utilisé par
des enfants ou avec des enfants à proximité.
11. Pour vous protéger des chocs électriques, ne submergez pas le bloc
d'alimentation ou une autre partie du l d'alimentation et de la che du
hachoir dans l'eau ou un autre liquide.
12. N'utilisez pas cet appareil à l'extérieur. Utilisez toujours ce hachoir à
l'intérieur sur une surface plane pour permettre une bonne circulation d'air.
Ne placez jamais l'appareil sur un tapis, une serviette, un journal, etc., ce
qui pourrait empêcher la circulation d'air à la base de l'appareil et causer
une défaillance.
13. Débranchez l'appareil de la prise de courant lorsque vous enlevez des
pièces ou en ajoutez et avant de le nettoyer.
14. Ne faites jamais fonctionner cet appareil si le l d'alimentation ou la
che est endommagé ou si l'appareil fonctionne mal, a été échappé
ou endommagé de quelque façon. Retournez l'appareil au centre de
réparation mandaté le plus près de chez vous pour être inspecté, réglé ou
réparé.
15. Ne laissez pas le l d'alimentation pendre sur le bord de la table, du
comptoir ou toucher une surface chaude incluant la cuisinière.
16. Ne placez jamais l'appareil près d'un brûleur à gaz chaud ou près d'un
brûleur électrique.
N'utilisez pas cet appareil pour d'autres usages que celui prévu.
CONSERVEZ CES INSTRUCTIONS
NOTEZ BIEN: Cet appareil est muni d'une che polarisée (une broche plus
large que l'autre). Pour diminuer le risque de choc électrique, cette che se
branche seulement dans une prise polarisée d'une seule façon. Si la che ne
se branche pas complètement dans la prise, retournez-la. Si malgré tout elle ne
se branche pas complètement, communiquez avec un électricien qualié. Ne
tentez pas de neutraliser ce dispositif de sécurité.
Instructions pour le l d'alimentation court – Un l d'alimentation court est
fourni pour diminuer le risque que le l s'entremêle ou que vous trébuchiez sur
un l plus long. Une rallonge peut être utilisée si vous prenez les dispositions
nécessaires. Si vous utilisez une rallonge, les caractéristiques électriques
indiquées doivent être au moins de même niveau que celles de l'appareil
électrique. Le l plus long doit être placé pour qu'il ne pende pas sur le bord
d'une table où il pourrait être tiré par un enfant ou vous faire trébucher.
3