GoWISE USA GW88012 User manual

Please read through this manual carefully before use
IMPORTANT SAFEGUARDS AND TIPS
ELECTRIC POWERFUL
MEAT GRINDER
Model No.: GW88012
WWW.GOWISEUSA.COM
USER MANUAL

2
THANK YOU FOR YOUR PURCHASE!
Join
Contact Our Customer Care Team
Register Your Product
Specifications
Explore
the GoWISE Community on
Facebook, Instagram, Twitter, and
Pinterest for updates, tips, and
great deals!
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST
www.gowiseproducts.com/apps/
product-registration
(The serial number is normally
underneath the product. Please
check there first.)
Voltage: 120V, 60Hz
Wattage: 600W
Max. Locked Motor approx.
wattage: 2000W
recipes on our recipe App or
www.gowiseproducts.com/blogs/
recipes

Register Your Product............................
Specifications...........................................
Important Safeguards...........................
Product Structure...................................
Set Up & Instruction...............................
Before First Use.............................
Assembling...................................
Mincing Meat.................................
Reverse Function...........................
Making Sausage............................
Making Kibbe.................................
Cleaning & Maintenance.......................
Warranty...................................................
2
2
4
6
8
8
8
10
10
11
12
13
14
TABLE OF CONTENTS

4
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
1.1. READ THE ENTIRE MANUAL
BEFORE ATTEMPTING TO
OPERATE.
2.2. Keep the box and packing
material for storage.
3.3. This appliance is intended for
household use only. DO NOT use
for commercial purposes. Using
the appliance for commercial
purposes will void the warranty.
4.4. ALWAYS make sure there is
no power to the unit when
assembling or disassembling
the unit. DO NOT attempt to
assemble or disassemble the unit
when it is plugged in.
5.5. This appliance is NOT INTENDED
FOR USE by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
6.6. This appliance is NOT INTENDED
FOR USE by children. Children
should be supervised to ensure
that they DO NOT play with the
appliance.
7.7. Close supervision is necessary
when any appliance is used near
children.
8.8. When carrying the unit be sure
to hold the body with both hands.
DO NOT carry the unit by the
hopper plate or head.
9.9. DO NOT use the cutting blade
and cutting plate when using
kibbe attachment.
10.10. To avoid injury, NEVER push
ingredients by hand. Always
use the food pusher to push
ingredients into the grinder.
11.11. DO NOT grind hard food such
as bones, nuts, etc. This may
damage the grinding gears.
12.12. DO NOT grind ginger and other
materials with hard fiber. This
may damage the grinding gears.
13.13. The unit should not run for more
than 10 minutes continuously. If
the meat grinder is needed for
more than 10 minutes, it must
be turned off to cool down the
motor for 10 minutes.
14.14. Operate the unit from “ON” to
“REV” or from “REV” to “ON” after
the previous working condition
stops for more than 30 seconds,
or it may cause some abnormal
movements such as moving up
and down that will easily destroy
the unit.
15.15. To avoid jamming, DO NOT force
or operate the unit with excessive
pressure.

IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
16.16. When the circuit breaker
activates, DO NOT turn the unit
on.
17.17. NEVER try to replace the parts
and repair the unit by yourself.
Please contact GoWISE
Customer Care Team via email
[email protected]om or
phone [phone].
18.18. DO NOT operate this appliance
if the cord or plug is damaged.
Please contact GoWISE
Customer Care Team via email
[e-mail] or
phone [phone].
5
SAVE THESE
INSTRUCTIONS

6
PARTS
1. Kibbe Attachment A
2. Kibbe Attachment B
3. Sausage Attachment (large)
4. Sausage Attachment (medium)
5. Sausage Attachment (fine)
6. Sausage Attachment (block)
7. Cutting Plate (medium)
8. Fixing Ring
9. Cutting Plate (fine)
10. Cutting Plate (fan)
11. Cutting Blade
12. Snake
13. Grinding Head
14. Food Container
15. Head Inlet
16. Lock
17. Switches
18. Body
19. Plug & Cord
20. Hopper Plate
21. Food Pusher
PRODUCT STRUCTURE
7
5
6
4
1
2
10
9
8
3

PRODUCT STRUCTURE
7
1512
21
20 19
17
18
1411
16
13

SET UP & INSTRUCTION
BEFORE FIRST USE
1.1. Remove all packaging materials,
stickers, and labels.
2.2. Check that voltage indicated on
the rating label corresponds the
mains voltage in your home.
3.3. Wash all parts (except body) in
warm soapy water.
4.4. Before plugging in the unit,
ensure the key switch is in the
“OFF” position, that is the natural
state of all keys.
1.1. Hold the grinding head and insert
it into the head inlet. Line up
the slots on the head inlet with
the notches on the head (fig. 1).
Once inserted, press the lock in a
clockwise direction to fasten the
head (fig. 2).
2.2. Place the snake into the grinding
head, long end first and turn to
feed the screw slightly until it is
set into the motor housing (fig. 3).
3.3. Place the cutting blade onto the
snake shaft with the blade facing
the front as illustrated (fig. 4). If
it is not fitted properly, the meat
will not be grinded.
CAUTION: SHARP BLADES.
HANDLE WITH CARE.
4.4. Place the desired cutting plate
next to the cutting blade, fitting
protrusions into the slots (fig. 5).
5.5. Support or press the center of
the cutting plate with one finger
then screw the fixing ring tight
with another hand (fig. 6).
DO NOT OVER TIGHTEN.
6.6. Place the hopper plate on the
grinding head and place it into
position (fig. 7).
7.7. Place the unit on a flat and stable
surface.
NOTE: The air passage at the
bottom and the side of the motor
housing should be kept free and
not blocked.
8
ASSEMBLING

ASSEMBLING
SET UP & INSTRUCTION
9
Figure 1. Figure 5.
Figure 2. Figure 6.
Figure 3. Figure 7.
Figure 4.

10
SET UP & INSTRUCTION
MINCING MEAT REVERSE FUNCTION
1.1. Cut all ingredients into cubes
or small strips. (Meat should be
boneless, fatless, and without
tendons) so they fit easily into the
hopper opening.
2.2. Press “ON” to turn on the grinder.
3.3. Feed food into the hopper plate.
Use the food pusher to push food
into the grinding head (fig. 8).
CAUTION: DO NOT USE YOUR
HANDS TO PUSH FOOD INTO
THE GRINDING HEAD.
4.4. After using, press “OFF” to turn
off the grinder.
5.5. Unplug the unit from the power
supply when not in use.
1.1. If the grinder jams during the
grinding process, press “REV”.
2.2. The snake will be rotate in the
opposite direction, and the head
will get empty.
3.3. Once the jam looks clear, press
“OFF” then after a couple
seconds, press “ON” to continue
grinding the food.
4.4. If the jam does not clear, press
“OFF” and unplug the unit.
5.5. Disassemble the fixing ring,
blades, and snake. Clean food
out from the grinding head.
6.6. Put the parts back together and
continue to grind the rest of the
food.
Figure 8.

11
SET UP & INSTRUCTION
Preparation
You will need sausage casings
for making sausages. Be sure to
purchase sausage casings at your
local grocery store or butcher.
Prepare the sausage casing as
instructed on the package or by
your butcher. Most sausage casings
require soaking in water for at least
an hour.
While the sausage casings are
soaking, mince the meats you intend
to stuff into sausages. Mix and
season together in a bowl.
1.1. Before starting, assemble the
sausage attachment as per
shown in the diagram below
(fig. 9).
2.2. Thread the sausage casing to the
sausage attachment (fig. 10).
NOTE: Keep the sausage casing
as wet as possible to make
it easier to thread onto the
sausage attachment.
Figure 9.
Figure 10.
MAKING SAUSAGE
3.3. Once threaded, load the hopper
with the sausage meat and
press “ON” until you see a bit of
meat come through the sausage
attachment then press “OFF” to
turn off the unit.
4.4. Pull a bit of the sausage casing
out and tie the end in a knot.
Thread the sausage casing
with the knot at the end of the
sausage attachment. This will
ensure a tight connection.
5.5. Press “ON” to turn on the unit
and feed meat into the grinding
head using the food pusher.
6.6. While the food is pushing out,
hold the sausage links up to
guide the sausage out to ensure
the stuffing is as tight as possible.
7.7. Once all the meat has been
pushed out, cut the end of the
sausage casings.
NOTE: Be sure to cut with a bit of
extra casing at the end.
8.8. Roll into sausages into a coil or
separate into sausage links.

12
SET UP & INSTRUCTION
MAKING KIBBE
Kibbe is a dish popular in Middle
Eastern cuisine. It is usually spiced
ground meat with a grain. (See recipe
book for a Kibbe recipe).
1.1. Once the meat has been minced
properly, disassemble by
reversing the steps from Figure
6-3 (pg. 9) to remove the cutting
plate and cutting blade.
2.2. Place kibbe attachments A and
B onto the feed screw shaft
together, fitting protrusions in the
slots (fig. 11).
3.3. Screw fixing ring into place until
tight (fig. 12). DO NOT OVER
TIGHTEN.
4.4. Press “ON” to turn on the unit
and meat will start to come out
of the kibbe attachment.
Figure 11.
Figure 12.
Figure 13.

13
CLEANING & MAINTENANCE
CLEANING
1.1. Rinse and remove meat from
each part. Wash each part in
warm soapy water.
2.2. Wipe all the cutting parts with
vegetable oil-wet cloth.
3.3. DO NOT immerse the motor
housing in water. Wipe it down
with a damp cloth.
NOTES:
• DO NOT USE A BLEACHING
SOLUTION OR PUT IN YOUR
DISHWASHER. This will discolor
the aluminum surfaces.
• The removable parts are NOT
dishwasher safe.
• Coat cutting parts with oil, such
as olive oil or vegetable oil, to
prevent rusting.
• Thinners and petrol will crack or
change the color of the unit.
To order replacement parts please
contact our Customer Care Team.
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST
DISASSEMBLING
1.1. Make sure that the motor has
turned off completely.
2.2. Unplug the unit from the power
outlet.
3.3. Disassemble the unit by reversing
the steps from Figure 1-6 on
Page 9.
4.4. To remove the cutting plate
easily, place a screwdriver
between the cutting plate and
the head as illustrated and lift it
up (fig. 19).
5.5. Press the lock counterclockwise
and remove the grinding head as
illustrated in Figure 20.
Figure 19.
Figure 20.

WARRANTY
GoWISE USA warrants all products against defects in materials and
workmanship for one (1) year effective from the date of purchase.
GoWISE USA will replace any products that are found to be defective
due to manufacturer flaws based on eligibility. Refunds issued by
GoWISE USA must be purchased directly from GoWISE USA and are
only available to the original purchaser within the first 30 days. We do
not issue refunds for items bought by thirdparty retailers.
This warranty extends only to personal use and does not extend to
products that has been used for commercial, rental or any other use
this product was not intended for. There are no warranties other than
the warranties expressly set forth with each product.
This warranty is non-transferrable. GoWISE USA is not responsible
in any way for any damages, losses, or inconveniences caused by
equipment failure by user negligence, abuse, or use noncompliant with
the user manual or any additional safety, use, or warnings included in
the product packaging and manual.
This warranty only covers purchases within the 48 contiguous states
of United States of America. For purchases made outside the 48
contiguous states, such as AK, HI, PR, or Canada, we will replace the unit
under the one-year warranty upon receipt of a proven defect by video
or picture. However, the replacement will only ship to a freight forwarder
or address within the 48 contiguous United States. The consumer is
responsible for arranging shipment outside of the 48 contiguous states.
GoWISE USA assumes no liability for damage caused using this product
other than for its intended use or as instructed in the user manual.
Some states do not allow this exclusion or limitation of incidental or
consequential losses, so the foregoing disclaimer may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which may vary from state to state.
ALL EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE
WARRANTY OF MERCHATIBILITY, ARE LIMITED TO THE PERIOD OF
THE LIMITED WARRANTY.
NOTE: General Warranty excludes refurbished / auction items.
14

WARRANTY
Additional 60-Days Warranty
You can extend your 1-year warranty by an additional 60 days. Log onto
www.gowiseproducts.com/apps/ product-registration and register
your product within the first 14 days of your purchase for the extended
warranty.
DEFECTIVE PRODUCTS & RETURNS
If your product is defective within the 1-year warranty period, please
email our Customer Care Team at [e-mail]. To expedite
your issue, please provide the 4 items below:
1.1. Copy of the invoice, order information, or gift receipt showing the
date of purchase
2.2. Serial number, usually found on a sticker located on the bottom
on back of the unit
3.3. Picture or video of the issue or defect that you are experiencing
4.4. Shipping address information
Authorized Retailers:
Amazon
GoWISE USA
WayFair
Houzz
Home Depot
etailz
MorningSave.com
Bed Bath & Beyond
Jet.com
Walmart.com
Macy’s
15

•To ensure the correct use of
this appliance, read these
instructions carefully and
thoroughly.
•Please keep this manual for
future reference.
•Thank you for purchasing this
GoWISE USA Electric Meat
Grinder.
WWW.GOWISEUSA.COM
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST