Easy@Home 45410 User manual

ASSEMBLY INSTRUCTIONS
BATHROOM SPACE SAVER SHELF
Dwww.xxxxxxxxx.com0111 111 111
MODELL: DMV-MM-02, 07/07, E25654
(14 Cent/min aus dem deutschen Festnetz. Mobilfunk max. 42 Cent/min)
JAHRE GA R ANTIEJAHRE GA R ANTIE
D
KUNDENDIENST
www.xxxxxxxxx.com0111 111 111
MODELL: DMV-MM
USA
AFTER SALES SUPPORT
877 282 6195
MODEL:
Y EAR WAR R ANTY
IRE
AFTER SALES SUPPORT
www.xxxxxxxxx.com0555 555 555
GB 0444 444 444
MODEL: DMV-MM-02, 07/07, E25654
3
3
2
3
YEAR WARRANTY
45410
B A T H R O O M
64.5 H X 23 W X 10 D IN
(164 H x 58 W x 25 D CM)

Parts List
USA 877 282 6195
AFTER SALES SUPPORT MODEL: 45410
MONDAY - FRIDAY 10:00am - 6:00pm EST
**** Do not fully tighten the unit until completely assembled. Once completely
assembled check each screw to ensure that they are tightened. Double check all screws
a 2nd time.
2
A
1PC
B
1PC
C
4PCS
D
1PC
E
1PC
F
1PC
G
1PC
H
2PCS
Tools Required: Phillips Screwdriver
I: 1PC J: 3PCS K: 1PC
L: 22PCS M: 2PCS N: 2PCS

Assembly
USA 877 282 6195
AFTER SALES SUPPORT MODEL: 45410
MONDAY - FRIDAY 10:00am -6:00pm EST
STEP 1
Begin by placing part (I) between parts (A) and (B). Use 2 screws (L) and tighten.Take all
4 pcs of part (C) and place onto part (A) and (B).
3
A
B
C
I
L
Figure 1
L

Assembly
STEP 2
USA 877 282 6195
AFTER SALES SUPPORT MODEL: 45410
MONDAY - FRIDAY 10:00am - 6:00pm EST
4
D
JE
H
Figure 2
I
L
L
C
Place part (H) between parts (C). Use screws (L) and tighten. Repeat this step on the
other side. Take part (D) and place onto parts (C). Then, take part (E) and place onto
parts (C). There is 1 extra hole on top of each part (D) and (E). Make sure these are on the
same side that part (I) is on. This will become the back side of the unit. Next, using 4 screws
(L) tighten part (J) between the lower section of parts (D) and (E). Repeat this step with
the next shelf by using 4 screws (L) and tighten part (J) between the upper section of
parts (D) and (E).

Assembly
STEP 3
Take part (F) and place onto part (D).Then, take part (G) and place onto parts (E).
Next, using 4 screws (L) tighten part (J) between parts (F) and (G).Then, using
4 screws (L) tighten part (K) between parts (F) and (G). Now that the unit is set- up
USA 877 282 6195
AFTER SALES SUPPORT MODEL: 45410
MONDAY - FRIDAY 10:00am - 6:00pm EST
5
L
FKG
Figure 3
tighten all the screws (L). Double check all the screws (L) a 2nd time.
D
L
E
J