Easydive leo3 User manual

Easydive - Via dell’Industria 13 int 6, 48015 Cervia (RA) - Italy ![email protected] - [phone] | [phone] !
Hand Control - Right
Front Back
1. Autofocus (Exposure Reading) and Shutter Release Mode. To change the shooting
mode, hold down Button 1 until the Red LED is switched on (15 sec.).
2. Photo Shoot:
!Mode 1: When you press the button you have the autofocus, when you release the
!!button you will have the shoot (Default Setting).
!Mode 2: When you press the button first you have the autofocus and then the !!!
shoot. (If the lens is already in focus you will have the direct shoot).
In Video Mode, starts or ends the Video Recording (REC).
3. This Button Starts or Ends the Video Recording (REC), also in Photo Mode.
The following buttons are enabled in Manual Mode (M). The mode selection must be
done before inserting the camera into the Housing. If you choose another mode, only
manually set functions are available. If you use the Camera in Video Mode, you will be
able to switch video modes.
!4. Aperture -
5. Aperture +
6. Shutter Speed -
!7. Shutter Speed +
Right Hand Control!
10. On / Offelectronic board (to switch on press once, to switch offhold down about
3 seconds until the board is switched off). The camera will go in Standby limiting the
power consumption.
8. ISO +
9. ISO -
S1 |S1R |S1H | S5 | GH5s |GH5 |G9
With S1 and S1R, it is necessary to Remove the Rubber Protection of the Camera's Viewfinder,
to allow the correct closure of the housing.
Press the buttons 4,5,6,7,8,9 once to change
by one step. Keep pressed to quickly change
the chosen parameter.

Easydive - Via dell’Industria 13 int 6, 48015 Cervia (RA) - Italy![email protected] - [phone] | [phone]!
Hand Control - Left
Back Front
Left Hand Control!
1. Autofocus Video Mode (Keep Hold until the lens find the focus).
2. In Video Mode, starts or ends the Video Recording (REC).
3. Change Video Mode:
!- Video Mode A/S/P/M.
Set the Resolution and the Quality in Video Mode.
7.
8. P-Style Button, change Preset Filters (Black and White, Natural, Vivid Colors,
ecc...).
9. Change Preset White Balance (Auto | Incandescent | Fluorescent | Direct Sunlight
| Flash | Cloundy | Shade).
10. On / Offelectronic board (to switch on press once, to switch offhold down about
3 seconds until the board is switched off). The camera will go in Standby limiting the
power consumption.!
!
4. Focus Area Mode. Press the button to scroll through the available options.
5. In Preset WB Custom, press the button to acquire WB in Manual.
6. Focus point shift (9 positions, press to scroll).
S1 |S1R |S1H | S5 | GH5s |GH5 |G9