Easydive leoR User manual

1. Autofocus (exposure reading) and shooting mode change. To change shooting mode, keep the
button pressed until the icon changes on the display. In Ph. Mode, the timer shooting ends.
2. Shooting:
Mode (Re): When the button is pressed, autofocus occurs, when the button is released, the shot will
be triggered.
Mode (Pr): When the button is pressed, first the autofocus is obtained and then the shutter. (if the lens
is already in focus, direct shooting will occur).
Mode (Ph): When the button is pressed, the timed shutter for the photogrammetry function is triggered
(Mode Activated on Demand).
4. Aperture -.
5. Aperture +.
6. Shutter Speed -.
7. Shutter Speed +.
8. ISO -.
9. ISO +.
For buttons 4 - 5 - 6 - 7 - 8 - 9, press once to change by one step, keep pressed to change the
parameter in sequence.
10. Switch Button, by pressing once you pass to the Switch 1, and a blue led lights up. Pressing the
button once more switches to the Switch 2 and a yellow LED lights up. Pressing a third time turns off
the LED and returns to the main mode. Keeping the button pressed for 3 sec. The Housing Menu
mode is activated and a purple LED lights up. Follow the numbering of the buttons in this manual to
navigate the menus. To exit the menu mode, press button 11 "on / off".
monitor housing is switched on (Easydive logo). It is possible to turn off or turn on the camera only, by
pressing the button once quickly. To turn off both the housing and camera, press and hold the button
until it turns off.
Main Mode
Easydive - Via dell'Industria 13 int 6, 48015 Cervia (RA) - Italy [email protected] - [phone] - [phone]
Buttons Panel LeoR
Z5 |Z50 |Z6 |Z6 II |Z7 | Z7 II
In video mode, the button activates or deactivates video recording (REC)*.
11. Housing and camera "on /off"button **. To switch on, keep the button pressed until the
* The Video Mode must be selected before inserting the camera inside the housing.
** For improved management of camera shutdown, the purchase of acompatible exteral battery
is recommended.
3. AF Mode, (AF-S | AF-C | MF) .

1. Autofocus (exposure reading) and shooting mode change. To change shooting mode, keep the
button pressed until the icon changes on the display. In Ph. Mode, the timer shooting ends.
2. Shooting:
Mode (Re): When the button is pressed, autofocus occurs, when the button is released, the shot will
be triggered.
Mode (Pr): When the button is pressed, first the autofocus is obtained and then the shutter. (if the lens
is already in focus, direct shooting will occur).
Mode (Ph): When the button is pressed, the timed shutter for the photogrammetry function is triggered
(Mode Activated on Demand).
4. White Balance Preset.
5. Shift Point or Area of Focus. 9 Perimeter positions in addition to the central point.
10. Switch Button, by pressing once you pass to the Switch 1, and a blue led lights up. Pressing the
button once more switches to the Switch 2 and a yellow LED lights up. Pressing a third time turns off
the LED and returns to the main mode. Keeping the button pressed for 3 sec. The Housing Menu
mode is activated and a purple LED lights up. Follow the numbering of the buttons in this manual to
navigate the menus. To exit the menu mode, press button 11 "on / off".
monitor housing is switched on (Easydive logo). It is possible to turn off or turn on the camera only, by
pressing the button once quickly. To turn off both the housing and camera, press and hold the button
until it turns off.
Switch Mode 1
Easydive - Via dell'Industria 13 int 6, 48015 Cervia (RA) - Italy [email protected] - [phone] - [phone]
Buttons Panel LeoR
Blue Led Actived
Z5 |Z50|Z6 |Z6 II |Z7 |Z7 II
In video mode, the button activates or deactivates video recording (REC)*.
11. Housing and camera "on /off"button **. To switch on, keep the button pressed until the
* The Video Mode must be selected before inserting the camera inside the housing.
**For improved management of camera shutdown, the purchase of acompatible exteral battery is
recommended.
3. Picture Style.
7. Video Resolution or Photo Format,changes the video resolution or the Photo Format
(depends of the mode selected)*.
6. Drive Mode (Photo Mode),Manages the type of Shoot (Single, Timed, etc ...).
8. Change Focus Area, among the available settings (Points and Areas).
9. Sensor Format,allows you to select the sensor format from FX |DX |1: 1|5: 4|16: 9.

1. Autofocus (exposure reading) and shooting mode change. To change shooting mode, keep the
button pressed until the icon changes on the display. In Ph. Mode, the timer shooting ends.
2. Shooting:
Mode (Re): When the button is pressed, autofocus occurs, when the button is released, the shot will
be triggered.
Mode (Pr): When the button is pressed, first the autofocus is obtained and then the shutter. (if the lens
is already in focus, direct shooting will occur).
Mode (Ph): When the button is pressed, the timed shutter for the photogrammetry function is triggered
(Mode Activated on Demand).
10. Switch Button, by pressing once you pass to the Switch 1, and a blue led lights up. Pressing the
button once more switches to the Switch 2 and a yellow LED lights up. Pressing a third time turns off
the LED and returns to the main mode. Keeping the button pressed for 3 sec. The Housing Menu
mode is activated and a purple LED lights up. Follow the numbering of the buttons in this manual to
navigate the menus. To exit the menu mode, press button 11 "on / off".
monitor housing is switched on (Easydive logo). It is possible to turn off or turn on the camera only, by
pressing the button once quickly. To turn off both the housing and camera, press and hold the button
until it turns off.
Switch Mode 2
Easydive - Via dell'Industria 13 int 6, 48015 Cervia (RA) - Italy [email protected] - [phone] - [phone]
Buttons Panel LeoR
Yellow Led Actived
Z5 |Z50 |Z6 |Z6 II |Z7 |Z7 II
In video mode, the button activates or deactivates video recording (REC)*.
11. Housing and camera "on /off"button **. To switch on, keep the button pressed until the
* The Video Mode must be selected before inserting the camera inside the housing.
** For improved management of camera shutdown, the purchase of acompatible exteral battery
is recommended.
8. Metering Mode.
9. Flash Mode.
3. Focus point shift, Up Arrow.
4. Focus point shift, Left Arrow.
5. Focus point shift, Right Arrow.
6. Focus point shift, Down Arrow.
7. Focus point shift, shift the point to the Center.