PANTONE 072 C
PANTONE 123 C
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Easylife Rechargeable Hot Water Bottle.
Here’s a brand new version of an old-fashioned favourite. A hot water bottle that
heats up electrically to 60°C and then stays comfortably warm for up to 5 hours.
You don’t have to boil a kettle, risk scalds and splashes or empty it in the morning.
Instead, just plug it into the mains with the cable provided, wait 10-15 minutes,
un-plug and retire to bed for a warm and cosy good night’s sleep. Together with
a hand warmer pouch, it’s warmth is also good to ease muscle aches or pains on
your stomach or back, even to warm cold feet. Permanently sealed, with burst-proof
triple-layer construction, it features a built-in safety thermostat to automatically
switch off, preventing any chance of overheating. Cuddly, in a plush comfy-soft
velour cover that’s silky soft on your skin, it’s supplied with a 230V charger with
65cm mains cable. 100% polyester. Measures L26xW18.5xD4.5cm.
BEFORE USE
1. Check that your hot water bottle feels full.
2. Check that there are no punctures or leaks.
3. Check that there are no defects in workmanship.
4. Check that the mains cable is in good condition before plugging in.
TO CHARGE
IMPORTANT: Always charge on a at surface. The product will not charge if the
product is still over 40 degrees, which is monitored by an internal thermometer. If
it does not charge straight away, allow to cool for longer.
1. Slideopenthecover(A).Youwillneedtoopenthechargingrackslightly,inordertottheHot
Water Bottle in. (B) Position the Hot Water Bottle on the charging rack (C) and close.
2. Plug the power lead into a wall socket and switch on at the wall socket.
3. The red indicator light will come on and switch off to let you know when the Hot Water Bottle is
ready to be used. This should be 10 to 15 minutes.
4. Switch off at the wall socket and unplug the charging rack from the heated bottle. Do not leave
plugged in and on once the red indicator light has switched off.
5. Ensure your hands are always dry during the above procedure.
6. To recharge, follow the same procedure.
TIP: To ensure even heating, gently move it side to side after 4-5 minutes
while charging.
TO USE
1. Only use when the bottle is unplugged. Never use while plugged in or charging.
2. Ensure that there are no leaks and that the surface will not come into contact with anything
that could damage or puncture it.
3. Itheatsupto60˚Candwillstaywarmfor2to5hours.
Will
keep warm
for up to
5 hours
Paper weight 60gsm
(A) (B)
(C)
TO CLEAN
1. Wipe surface with a damp cloth.
2. Do not immerse in water as the electrics will short circuit.
TO STORE
1. Allow to cool down before storing.
2. Clean all parts and put them into the original packing box for storage.
3. Do not place items on top of it during storage.
4. Examine the appliance for any signs of damage or deterioration before re-use.
everyday solutions
™
Est. 1992
Problem Solution
Product Will Not
Charge
Ensureitisonaatsurface
The internal thermometer may still be reading a high tempera-
ture even though it is cool to the touch . Allow to cool for longer.
Check that the charge has been fully inserted into the charging
port on the product
Ensure the plug is fully inserted into wall socket and socket is on
Charger is
plugged in
correctly but light
is not coming on
Contact Easylife Customer Services
Leaking Discontinue use and contact Easylife Customer Services
