EasyStand Evolv Perfect Fit User manual

Perfect Fit Guide
™
™
Proper positioning is needed to achieve optimum standing posture.
Before transfering into t e stander,
measure for approximate seat dept
(A) and seat to footplate (B) settings.
Use t ese measurements to adjust
t e seat dept and footplate eig t
on t e stander.
step one - measure
step two - seat depth
step three - back angle
To adjust seat dept , loosen
t e knob under t e seat (C).
Depress t e snap button on t e
adjustment tube w ile moving t e
back (D). Tig ten t e knob after
adjusting.
(C) (D)
After ac ieving your desired seat
dept , rotate t e back angle
adjustment knob (E) so t e
increment indicator (F) is
in t e green (safe) area.
(B)
(A)
over . . .
(F)(E)

www.easystand.com 800•342•8968

Perfect Fit Guide
™
™
Proper positioning is needed to achieve optimum standing posture.
www.easystand.com 800•342•8968
step seven - Glider positioning
If you ave an Evolv Glider, slide
forward so t e knees are centered
in t e kneepads (L). Secure calf
straps.
step si - kneepad
Adjust and secure t e kneepad so it
fits comfortably up to t e knees (K).
step four - footplates
Loosen t e ratc et andles on t e
footplates to adjust eig t and
plantar/dorsi (G). T e knees s ould
be slig tly lower t an t e ip (H).
Tig ten ratc et andles after
positioning.
(G) (H)
(K) (L)
Printed in the USA. © 2008 Altimate Medical, Inc. FORM EVPFG 608
Inspect your standing frame periodically to assure that it is in safe operating condition.
step five - positioning
If you have a Glider, skip to step seven.
Position t e user’s ips as close as
possible to stander’s ip pivot (I). To
determine correct positioning, fit
two fingers between t e front of t e
seat and t e back of t e knee (J).
(I) (J)