Eaton LINX Linear Worksurface User manual

L i n e a r
W o r k s u r f a c e s
84567
Fully Assembled Worksurface
Figure 2
Figure 2a
Tools Required
-1/4” Hex key (provided)
-Phillips head screwdriver
NOTE: Due to packaging restrictions, the foot is not
factory assembled to the 40” leg.
1. Attach a Foot to each 40” Leg using two 5/16”-18 x
1-1/2” socket head cap screws and two lock washers.
See Figure 1.
2. Attach a Left and Right Leg Assembly to their respec-
tive ends of the Modesty Panel using the 1/4”-20 x
3/4” Phillips pan head machine screws provided.
Tighten securely. See Figure 2 and Figure 2a.
NOTE: Depending on the height of the Modesty Panel
being installed, it may be necessary to remove
the plastic hole plug at the bottom of each leg.
Figure 1
TYPICAL LEG AND MODESTY PANEL ASSEMBLY
Top support
Leg assembly
1/4”-20 x 3/4”Phillips
pan head machine screws
12” or 26” high
Modesty panel
Plastic hole
plug
Full depth leg
assembly 12” or 26” high
Modesty panel
Plastic hole
plug
1/4”-20 x 3/4”Phillips
pan head machine screws
Lock washers
5/16”-18 x 1-1/2” Socket head
cap screws
40” Leg
Foot
technical furniture
A-1

L i n e a r
W o r k s u r f a c e s
84567
1. Remove the Worksurface from the carton and place it
carefully, finish side down, on a smooth clean surface.
2. Place the assembled legs and Modesty Panel on the
Worksurface and align its pre-drilled holes with those
in the Panel and Legs. Attach with the #10 screws pro-
vided. See Figure 3a and Figure 3b.
3. Turn the unit over and adjust the Glide Feet if
necessary.
Figure 3b
Figure 3a
Modesty panel
#10 screws
Full depth leg
assemblies
TYPICAL WORKSURFACE ASSEMBLY Standard leg
assemblies
Modesty panel
#10 screws
Glide feet
Glide feet
technical furniture
A-2

D e l u x e I n t e g r a t e d
W o r k s u r f a c e
84567
Tools Required
-5/32” Hex key (provided)
-1/4” Hex key (provided)
-Phillips head screwdriver
1. Attach the leg/modesty panel assemblies to the Rear
Leg with the 1/4”-20 x 3/4” Phillips pan head machine
screws provided. See Figure 1.
NOTE: Depending on the height of the modesty panels
being installed, use either two or three screws
at each end.
2. Place the Worksurface on top of the top supports.
From underneath, align the holes in the top supports
and the oval holes in the modesty panels with the pre-
drilled holes in the bottom of the Worksurface. Fast-
en with the #10 Phillips head screws provided. See
Figure 2.
3. Adjust the Glide Feet if necessary.
Figure 1
1/4”-20 x 3/4” Phillips
head machine screws
Leg/modesty panel
assemblies
Rear leg
Figure 2
Top support
#10 Phillips head
screws
Worksurface
Modesty panel
Deluxe Integrated Worksurface
technical furniture
A-5

84567
Parts List
Description Qty.
1249X Leg - L.H., 29” High
1250X Leg - L.H., 27” High
1779X Leg - L.H., 40” High
6810X Leg - R.H., 36” High
1247X Leg - R.H., 29” H
1248X Leg - R.H., 27” H
1778X Leg - R.H., 40” H
6811X Leg - R.H., 36” H
16723X Leg - L.H., 29” H x 36” D 1
6812X Leg - L.H., 36” H x 36” D
6724X Leg - R.H., 36” H x 36” D
6813X Leg - R.H., 36” H x 36” D
2454X Leg “A”, 29” H
4588X Leg “A”, 27” H
4675X Leg “A”, 40” H
2455X Leg “B”, 40” H
4589X Leg “B”, 40” H
4676X Leg “B”, 40” H
4822X Full Depth Leg, 29” H x 24” D
6727X Full Depth Leg, 29” H x 36” D
26814X Full Depth Leg, 36” H x 24” D 1
6816X Full Depth Leg, 36” H x 30” D
6818X Full Depth Leg, 36” H x 36” D
1221X Foot, 27.90”
1222X Foot, 21.00” 1-2
36718X Foot, Regular - 36.00” D
7354X Foot, 19.00”
1707X Foot, 27.90”
Part Number
Parts List
Description Qty.
4416X Foot, Full Depth Leg - 27.90”
44824X Foot, Full Depth Leg - 21.90” 1-2
6717X Foot, Full Depth Leg - 33.90”
51242X End Caps (pair) 2
621333 Glide Foot 4
768809 5/16”-18 x 1.00” Socket Head screw 4-8
818950 .31 Lock Washer 4-8
959103 #10-AB x .75” Phillips Pan Head
Thread Forming Screw
Varies
10 53956 1/4”-20 x 3/4” Phillips Pan Head
Machine Screw
Varies
11 2232X Hole Plug Varies
5091X 12” Modesty Panel, 24”
5092X 12” Modesty Panel, 30”
5093X 12” Modesty Panel, 36”
5094X 12” Modesty Panel, 42”
5095X 12” Modesty Panel, 48”
5096X 12” Modesty Panel, 54”
5097X 12” Modesty Panel, 60”
5098X 12” Modesty Panel, 66”
5099X 12” Modesty Panel, 72”
12 5100X 12” Modesty Panel, 24” 1-2
5101X 12” Modesty Panel, 30”
5102X 12” Modesty Panel, 36”
5103X 12” Modesty Panel, 42”
5104X 12” Modesty Panel, 48”
5105X 12” Modesty Panel, 60”
5106X 12” Modesty Panel, 72”
5365X 12” Modesty Panel, 24”
5366X 12” Modesty Panel, 30”
6133X 12” Modesty Panel, 30”
Part Number
L I N X W o r k s u r f a c e
S e r v i c e P a r t s L i s t
technical furniture
A-39

84567
L I N X W o r k s u r f a c e
S e r v i c e P a r t s L i s t
( c o n t . )
technical furniture
A-40
Parts List
Description Qty.
5107X 26” Modesty Panel, 24”
5108X 26” Modesty Panel, 30”
5109X 26” Modesty Panel, 36”
5110X 26” Modesty Panel, 42”
5111X 26” Modesty Panel, 48”
5112X 26” Modesty Panel, 54”
5113X 26” Modesty Panel, 60”
5114X 26” Modesty Panel, 66” 1-2
13 5115X 26” Modesty Panel, 72”
5116X 26” Modesty Panel, 24”
5117X 26” Modesty Panel, 30”
5118X 26” Modesty Panel, 36”
5119X 26” Modesty Panel, 42”
5120X 26” Modesty Panel, 48”
5121X 26” Modesty Panel, 54”
5122X 26” Modesty Panel, 60”
5367X 26” Modesty Panel, 24”
5368X 26” Modesty Panel, 30”
6134X 26” Modesty Panel, 30”
5131X Leg, Corner Workstation - 27”
14 5132X Leg, Corner Workstation - 29” 1
5133X Leg, Corner Workstation - 40”
6834X Leg, Corner Workstation - 36”
15 81066 Tie Plate Varies
9130X Tubular Leg, 27.66”
16 9175X Tubular Leg, 34.51” 1
9176X Tubular Leg, 39.16”
Part Number
Parts List
Part Number Description Qty.
1252X Modesty Panel, 24”
1254X Modesty Panel, 36”
17 1255X Modesty Panel, 48” 1
1256X Modesty Panel, 60”
1257X Modesty Panel, 72”

84567
Parts List
Description Qty.
5946X 26” Modesty Panel, 90° Connector
30”-30”
5947X 12” Modesty Panel, 45° Connector
24”-24”
5948X 26” Modesty Panel, 45° Connector
24”-24”
31 5949X 12” Modesty Panel, 45° Connector
30”-30”
1-2
5950X 26” Modesty Panel, 45° Connector
30”-30”
6720X 12” Modesty Panel, 90° Connector
36”-36”
6719X 26” Modesty Panel, 90° Connector
36”-36”
6845X 33” Modesty Panel, 90° Connector
36”-36”
5975X Storage Shelf, 24”
5976X Storage Shelf, 30”
5977X Storage Shelf, 36”
5978X Storage Shelf, 42”
32 5979X Storage Shelf, 48” 1
5980X Storage Shelf, 54”
5981X Storage Shelf, 60”
5982X Storage Shelf, 66”
5983X Storage Shelf, 72”
5966X Binder Shelf, 24”
5967X Binder Shelf, 30”
5968X Binder Shelf, 36”
5969X Binder Shelf, 42”
33 5970X Binder Shelf, 48” 1
5971X Binder Shelf, 54”
5972X Binder Shelf, 60”
5973X Binder Shelf, 66”
5974X Binder Shelf, 72”
Part Number
L I N X W o r k s u r f a c e
S e r v i c e P a r t s L i s t
( c o n t . )
technical furniture
A-41
Parts List
Part Number Description Qty.
18 10774X Cable Bushing Assembly 2
19 54348 1/4”-20 x 1/2” Hex Washer Head
Screw
4
20 4549X Foot, Conference Table 2
21 1258X Top Support, L.H. 1
22 1251X Top Support, R.H. 1
23 2285X Leg, Add-On Peninsula 1
24 68681 1/4”-20 x 3/8” Button Head Cap Screw Varies
25 6725X Top Support, L.H. 1
26 6726X Top Support, R.H. 1
27 68795 Double Back Tape, 16” Long 2
28 5341X Corner Support, 27” H 1
5342X Corner Support, 29” H
29 81049 Tie Bar
30 82703 1/4”-20 x 1/2” Button Head Cap Screw Varies
5939X 12” Modesty Panel, 90° Connector
24”-24”
5940X 26” Modesty Panel, 90° Connector
24”-24”
5941X 12” Modesty Panel, 90° Connector
24”L-30”R
31 5942X 26” Modesty Panel, 90° Connector
24”L-30”R
1-2
5943X 12” Modesty Panel, 90° Connector
30”L-24”R
5944X 26” Modesty Panel, 90° Connector
30”L-24”R
5945X 12” Modesty Panel, 90° Connector
30”-30”

84567
Parts List
Description Qty.
5338X Top, 24” x 24” Corner Connector
44 5339X Top, 24” x 30” Corner Connector 1
5340X Top, 30” x 30” Corner Connector
2180X Top, 90° Connector, 30” L-24” R
4042X Top, 90° Connector, 24” L-30” R
45 2181X Top, 90° Connector, 30”-30” 1
2185X Top, 90° Connector, 24”-24”
5951X Top, 45° Connector, 24”-24”
5957X Top, 45° Connector, 30”-30”
6640X Top, 90° Connector, 30” L-36” R
46 4806X 48” Conference End Worksurface 1
4807X 60” Conference End Worksurface
2923X Top, 30” x 30”
5578X Top, 24” x 24”
47 5579X Top, 30” x 24” 1
6644X Top, 36” x 36”
6661X Top, 36” x 36”, ESD
6832X Top, 30” x 30”, ESD
48 4805X Bracket, 48”/60” 1
49 81062 Leg Connector 1
50 59588 Lockwasher, .25” Internal Tooth 8
51 62071 #10AB x 1.00” Pan Head Self
Tapping Screw
5
Part Number
L I N X W o r k s u r f a c e
S e r v i c e P a r t s L i s t
( c o n t . )
technical furniture
A-42
Parts List
Description Qty.
34 6900X Keyboard Bridge Support 2
35 C855MM Posting Shelf 1
5162X Wire Cover, 27” Leg - L.H.
5166X Wire Cover, 27” Leg - R.H.
5085X Wire Cover, 27” Leg - Add-On
CWS
5163X Wire Cover, 29” Leg - L.H.
5167X Wire Cover, 29” Leg - R.H.
36 5086X Wire Cover, 29” Leg - Add-On
CWS
Varies
5164X Wire Cover, 40” Leg - L.H.
5168X Wire Cover, 40” Leg - R.H.
5087X Wire Cover, 40” Leg - Add-On
CWS
6822X Wire Cover, 36” Leg - L.H.
6821X Wire Cover, 36” Leg - R.H.
6820X Wire Cover, 36” Leg - Add-On
CWS
37 5083X Cable Retainer 2-6
38 57488 Cable Clip Varies
39 2255X “C” Leg 4
40 63655 .750” Dia. Hole Plug 8
41 54225 #10 Plain Washer 8
5821X 90° Curved Corner Connector,
24”-24”
5822X 90° Curved Corner Connector,
30”-30”
42 5823X 90° Curved Corner Connector,
24”-30”, L.H.
1
5824X 90° Curved Corner Connector,
24”-30”, R.H.
43 5825X 45° Curved Corner Connector,
24”-24”
1
5826X 45° Curved Corner Connector,
30”-30”
Part Number

84567
Linx Worksurfaces
Conference Worksurfaces
L I N X W o r k s u r f a c e s /
C o n f e r e n c e W o r k -
s u r f a c e s
technical furniture
A-43