Eaton TechBench Full Shelf User manual

Effective May 2018
Supersedes 91647
Instruction Sheet
IL211025 EN
TechBench Full Shelf
Figure 2.
1
91649
Linear TechBench™ Full Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Full Shelf and attach the
Brackets to the TechBench™ as shown in figure 1.
NOTE: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
1
91649
Linear TechBench™ Full Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Full Shelf and attach the
Brackets to the TechBench™ as shown in figure 1.
NOTE: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
Figure 1.
Linear TechBench™ Full Shelf
Tools Required
•(1) Phillips screwdriver (not supplied)
•(1) Plastic mallet (not supplied
1. Determine the location for the Full Shelf and attach
the Brackets to the TechBench™as shown in gure 1.
NOTE: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3⁄8"
pancake phillips head screws (provided).
See gure 2.

TechBench Full Shelf
Instruction Sheet
IL211025EN
Effective May 2018
2
91649
3. Lower the Full Shelf onto the Brackets and align
the holes in the sides of the shelf with the slots in the
Brackets. Fasten the shelf to the Brackets using four
#10-32 x 5/8” phillips head screws (provided) on
each side. See figure 3.
Figure 3
#10-32 x 5/8” phillips
head screws
Full Shelf
Bracket
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2018 Eaton
All Rights Reserved
Printed in USA
Publication No. IL211025EN 91649
May 2018
Eaton
160 Gold Star Boulevard
Worcester, MA 01606
United States
800-225-7348
508-852-4300
Eaton.com/furniture
Follow us on social media to get the
latest product and support information.
Eaton is a registered trademark.
*All trademarks are property
of their respective owners.
Figure 3.
3. While Lower the Full Shelf onto the Brackets
and align the holes in the sides of the shelf with
the slots in the Brackets. Fasten the shelf to the
Brackets using four #10-32 x 5⁄8" phillips head
screws (provided) on each side. See gure 3.