Acoustic Performance Partnership Eastern Acoustic Works FR152e
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
A
C
O
U
S
T
I
C
A
L
P
E
R
F
O
R
M
A
N
C
E
P
A
R
T
N
E
R
S
H
I
P
TECHNICAL SPECIFICATIONS FR152e
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING SERVICE ITEMS
LF: Complete Cone Driver
EAW Part No. 804066
HF: Complete Compression Driver/Tweeter
EAW Part No. 803020
Filter/Crossover Network Complete Assembly
EAW Part No. 225108
ARCHITECTURAL SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate a 15-in LF transducer and a 1-in exit compression driver
HF transducer.
The LF driver shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on constant directivity horn with a nominal coverage
pattern of 90°(h) x 45°(v). An internal passive filter net-
work shall provide fourth order acoustical crossover and sys-
tem equalization.
System frequency response shall vary no more than ±3 dB
from 70 Hz to 17 kHz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 98 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 130.5 SPL on axis at
1 meter. The loudspeaker shall handle 450 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 Ohms.
The loudspeaker enclosure shall be rectangular in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be dual Neutrik NL4 Speakon.
The system shall include a midrange frequency attenuator
(presence control). Three 3/8"-16 threaded mounting/sus-
pension points (2 top, 1 back) shall be provided as well as a
recessed cup to accept a standmount pole. The front of the
loudspeaker shall be covered with a vinyl coated perforated
steel grill backed.
The two-way full range loudspeaker shall be the EAW model
FR152e.
BACK
12.26
8.81
3.50
14.75
25.25
8.75
16.00
.88
(6.50)
TOP BOTTOM
7.38
14.75
6.44
SIDES
19.75 9.88
6.00
2.00
9.88
.88
(6.50)
FRONT
3/8"-16 MOUNTING POINT.
CENTER OF BALANCE.
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.
INPUT HAS (2) NL4 CONNECTORS WIRED IN PARALLEL.
FR152e
510291
exp 10/31/96 shb
