EAW SUBWOOFER AS415e User manual

SPECIFICATIONS AS415e
DESCRIPTION
APPLICATION
PERFORMANCE
PHYSICAL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS415e/2 pp October 2001 Printed in USA
A dedicated low frequency system in a trapeziodal enclosure.
Includes a vented 15-in woofer.
The AS415e is engineered for permanent installations. It
complements the AS460e or AS490e mid/high modules to
provide full range performance in a flexible, modular, multi-
enclosure format. Its trapezoid angles create the ideal splay
for arrays of 2x AS460e's. Includes comprehensive 3/8"-16
threaded mounting/suspension points. Six year warranty.
Applications include:
Stadiums Arenas
Performing Arts Centers Houses of Worship
Frequency Response (Hz)
±3 dB 60 Hz to 500 Hz
-10 dB 47 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 97
Impedance (Ohms) LF 8
Power Handling (Watts, Continuous)
LF 600
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
LF Peak 130
LF Long Term 124
Product Group I
Configuration Dedicated low frequency system
LF Subsystem & Loading 1x 15-in, vented
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2-Contact terminal strip
Suspension Hardware (18) 3/8"-16 threaded mounting
points (4 each top and bottom
and sides, 2 on back)
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 22.5 572
Width (front) 24.6 626
Width (rear) 16.5 419
Depth 23 584
Trapezoid Angle 10 Degrees per Side
Weights pounds kilograms
Net Weight 88 40.0
Shipping Weight 103 46.9

SPECIFICATIONS AS415e
DIMENSIONAL DRAWING A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS415e/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT 3/8-16 THREADED HOLE
(PI ANGLE).
INDICATES MOUNTING POINT 3/8-16 THREADED HOLE
(NUT PLATE).
SYMBOL INDICATES CENTER OF BALANCE
FRONT
22.50
24.63
GRILLE PARTIALLY SHOWN
BACK
C
L
C
L5.00
(1.50)
INPUT
4.00
1 .50
11.00
509138 (0)
exp 5/14/01 TOP/BOTTOM
8.50
C
A
4.24
A
16.31
23.00
L
13.64
1 .3
(16.50)
20°
SIDES
DIMENSIONS APPLY
TO BOTH SIDES
C
L
4.63
16.56
18.60
20°
509138 (0)
5/14/01
The low frequency loudspeaker system shall incorporate a 15-
in LF transducer that shall be mounted in a vented enclosure
tuned for optimum LF response.
System frequency response shall vary no more than ±3 dB
from 60 to 500 Hz measured on axis. The system shall pro-
duce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 130 dB SPL on axis at 1 meter.
The system shall handle 600 Watts of amplifier power (con-
tinuous) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint. Input connectors shall be 2-con-
tact terminal strip. Eighteen (18) 3/8"-16 threaded mount-
ing/suspension points (4 each top, bottom and sides, 2 on
back) shall be provided. The front of the loudspeaker shall be
covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS415e.
Manufacturing tolerances are +/- 0.13 and +/- 1°