Ebmpapst NOVA FLAIR TAIFUN II Premium GreenTech User manual

Original
Operating instructions with
EU Declaration of Conformity
According to EC Machinery Directive 2006/42/II B
January 2022
for the incomplete machine, which incomplete alone is not
functional.
Professional Nail Dust Collector
Taifun II Premium GreenTech
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
2
A TABLE OF CONTENTS
A Operating instructions
A 1 Picture documentation of the unit
A 2 Safety instructions
2.1 Intended use
2.2 Organisational measures
 2.3 Selectionandqualicationofpersonnel
2.4 Safety instructions for normal operation
2.5 Safe removal of possible blockages
2.6 Notes on special dangers
2.6.1 Electrical energy
2.6.2 Block diagram / schematic representation of the system
2.6.3 Noise
2.7 UVV regulations
2.8 Notes on the transport of the unit
2.9 Notes on storage of the unit
2.10 Information on decommissioning, dismantling and disposal
B Installation instructions and instructions for use
C Information about the installation/technical data
D Declaration of conformity and applied standards
Kaitstud / Secured by https://mereneid.eu/

3
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
A OPERATING INSTRUCTIONS
A 1 Picture documentation of the unit
Picture no. 1
Front and side view of the nail dust collector with
mainlterelements
Picture no. 2
Ready-to-installunitwithmainlterelementsand
extraction fans
Picture no. 3
Frontviewwithmainlterelementsanddustcol-
lection tray pulled out
Picture no. 4
Illustration of type plate Taifun II Premium Green-
Tech (example illustration)
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
4
A 2 Safety instructions
A 2.1 Intended use
The nail dust collector has been built
for installation under a work table or
table top and has been developed
exclusively for extracting dusts as
they occur during work in the nail studio. Any
other use beyond this, which does not comply
with the accident prevention regulations of the
Employer‘s Liability Insurance Association, is
considered improper use. The manufacturer is
not liable for any damage resulting from this.
In this case, the user must bear the risk alone.
Intended use includes, among other things, ob-
serving the respective manufacturer‘s opera-
ting instructions for the system components of
the nail dust collector as well as the inspection
and maintenance instructions.
The system components are built and linked
according to the latest state of the art and the
recognised safety rules. Nevertheless, their
use may result in hazards for the user or third
parties or impairment of the system or other
material assets.
Irrespective of the laws and regulations menti-
oned in these instructions, the respective valid
laws and regulations must be observed and
the generally recognised rules of technology
must be applied.
A 2.2 Organisatorische Maßnahmen
The operating instructions for the
Taifun II Premium GreenTech nail dust
collector must always be available to the
operating and maintenance personnel.
In addition to the operating instructions,
generally applicable, company-internal le-
gal and other binding regulations for acci-
dent prevention and environmental pro-
tection must be observed and instructed.
Itmustbeensuredthattheltersareregular-
ly cleaned and dry-cleaned according to the
operating instructions. If cleaning is no longer
possible,theltersmustbereplacedwiththe
replacement lters specied by the manufac-
turer.Thereplacedorcloggedltersmustbe
disposed of in accordance with the Closed Sub-
stance Cycle and Waste Management Act. The
personnel working on the nail dust collector
must have read and understood the operating
instructions, especially the chapter on safety
instructions, before starting work.
We recommend the management to have the
trainingconrmedbysignature.
All safety and danger notices on the machine
must be observed.
All safety and danger notices on the machine
must be kept completely legible.
In the event of safety-relevant changes to
the machine or its operating behaviour, it is
imperative that the machine is shut down im-
mediately, the fault rectied and the respon-
sible body or person reported immediately.
No changes, additions or conversions may be
madetothemachinethataectsafetywithout
the approval of the manufacturer of the nail dust
collector. Prescribed intervals or intervals spe-
ciedintheoperatinginstructionsforrecurring
tests/inspections must be observed. This also
applies to maintenance instructions in the do-
cumentation of the component manufacturers.
A 2.3 Selection and qualication of
personnel
Only instructed, mentally and physically suita-
ble persons who are at least 16 years old may
work on the machine.
Work on electrical equipment of the nail dust
collectormayonlybecarriedoutbyaqualied
electrician or by a „specially instructed per-
son“ under the guidance and supervision of
a qualied electrician in accordance with the
electrotechnical regulations. Specialists and
instructed persons in this sense are service
technicians/customer service of the manufac-
turer or trained electricians.
Kaitstud / Secured by https://mereneid.eu/

5
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
A 2.4 Safety instructions for normal
operation
In case of commercial use, the nail
dust collector must be inspected at
least once a year by a competent
person in accordance with the fol-
lowingspecicationsoftheEmplo-
yer‘s Liability Insurance Association.
BGV A3 „Electrical systems and equipment“.
In addition, the system must be checked regu-
larly, at least once a year, for operational safety
in accordance with the requirements of the
Operational Safety Ordinance (BetrSichV). The
inspections must be documented in accordan-
cewiththespecications.
ASafe removal of possible blockages
In the event that a foreign object enters the
interior of the housing or the fan motors, pro-
ceed as follows. motors, proceed as follows:
• Disconnect the unit from the mains voltage
• Try to remove the foreign body from the outside
• If the foreign object cannot be removed from
the outside, the unit must be dismantled and, if
necessary, opened by a trained specialist.
» Safety instructions
• Any operation that is not in accor-
dance with the intended use must
be refrained from.
• The nail dust collector may only be operated
whoarementallyandphysicallyt.
• Make sure that the mains voltage corresponds
to the required voltage of 230V.
• Thenaildustcollector&ltersmustbecleaned
or changed regularly according to the manufac-
turer‘s instructions.
• Only the lters listed in the operating instruc-
tions and provided by the manufacturer may
be used.
• Appropriate measures must be taken to ensure
that the nail dust collector is only used in a safe
and functional condition.
• Before each use of the nail dust collector, it
must be checked for externally visible damage
and defects.
• To avoid electric shock or other hazards, never
open an electrical enclosure and do not insert
any objects into the enclosure.
• The nail dust collector is protected by a built-in
fuse. A defective fuse must not be bypassed or
replaced with a stronger fuse.
• Safety-relevant damage (e.g. loosened screw
connections, defective protective devices, elec-
trical faults, defective operating devices) must
be reported to the responsible supervisor or
the manufacturer. The latter must then check
whether safe use is still possible.
• Repairs may only be carried out by authorised
and competent persons.
• Before starting work, every employee must en-
sure that no one is endangered by the use of
the nail dust collector.
• A damaged nail dust collector must be shut
down immediately and secured against being
put back into operation.
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
6
A 2.6 Notes on special hazards
A 2.6.1 Electrical energy
Only use original fuses with prescribed
amperage! Make sure that the mains
voltage corresponds to the required
voltage of 230V. In case of malfunc-
tionsintheelectricalpowersupply,switch o
the machine immediately.
Work on electrical systems or equipment may
onlybecarriedoutbyaqualiedelectricianor
by instructed persons under the direction and
supervision of a qualied electrician in accor-
dance with the electrotechnical regulations.
If inspection, maintenance, cleaning and repair
work is carried out on parts of the machine, the
nail dust collector must be disconnected from
the circuit or de-energised by removing the po-
wer plug from the socket.
The electrical equipment of the machine must
be inspected/checked regularly.
Defects, such as loose connections or scorched
cables,mustberectiedimmediately.
A 2.6.2 Block diagram/schematic representation of the system
A 2.6.3 Noise
The machine produces only slight, barely perceptible vibrations and noise with a rating level of LAR >
58 dB(A). According to the „Noise and Vibration Occupational Health and Safety Ordinance“, in short
LärmVibrationsArbSchV - these are not health hazards.
Illuminated LED
push button ON/
OFF
Cold appliance
plug / connection
with fuse link
Potentiometer
for innitely
variable Speed
control
Picture no. 5
Front/side view of the nail
dust collector with operating
devices and mains connec-
tion
Fuse
2A inert
Fan motors
Filterandlterguide
Control and electronics
Fuse and mains connection
Kaitstud / Secured by https://mereneid.eu/

7
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
A 2.7 UVV regulations
The individual Berufsgenossen-
schaften only issue accident pre-
vention regulations (UVV) relevant
to their area. The collection of in-
dividual accident prevention regulations pu-
blished by the Federation of Institutions for
Statutory Accident Insurance and Prevention
(Hauptverband der gewerblichen Berufsgenos-
senschaften) includes all of the currently valid
accident prevention regulations (UVV) issued
by the industrial Berufsgenossenschaften.
Most important accident prevention regula-
tions:
BGV A3
Electrical installations and equipment
BGV A8
Safety and health protection labelling at the workplace
GS-BIA-M02
Principlesforthetestingandcerticationofdustre-
moving machines and devices (SBM)
GS-BIA-M06
Principlesfor testing ltersforuse in dustremoving
machines
VDI 3801
Operation of ventilation and air-conditioning systems
VDI 3803
Ventilation systems; constructional and technical re-
quirements
VDI 6022
Hygienic requirements for ventilation and air-conditi-
oning systems
LärmVibrationsArbSchV
Noise & Vibration Occupational Health & Safety Or-
dinance
A 2.8 Notes on the transport of the unit
To prevent foreign bodies from getting into the
unit,theltersshouldbeinsertedandthelter
openings closed. Also, when transporting the
unit, use suitable cardboard packaging to pre-
ventforeignbodiesfromgettingintothenaildust
collector,theltersorthemotorsfromabove.
Before reassembling the unit, make
sure that there are no foreign bodies in
the unit itself or in the lters or motors.
For reinstallation, the installation instructions
prescribed on the following page 8 apply.
A 2.9 Notes on storage of the unit
The unit must always be stored in a dry and
dust-free environment. Suitable cardboard
packaging should also be used for this purpo-
se.
If the system becomes dirty during storage, it
must be cleaned thoroughly before installation
and commissioning. This should be done after
instruction by a specialist or an instructed per-
son.
A 2.10 Information on decommissioning,
dismantling and disposal
When taking individual system compo-
nents out of operation, the respective
manufacturer‘s operating instructions
for the components must be consul-
ted. If individual system components are remo-
ved from the network and the system as a who-
le continues to be operated, attention must
be paid to securing possible danger points.
If this impairs the safety level of the system in
individual areas or as a whole, the manufactu-
rer‘s CE declaration of conformity is invalid. The
responsibility for this lies with the operator.
When dismantling larger plant parts and as-
semblies, a hazard analysis must be carried out
to determine whether any risks arise for em-
ployees as a result or in the process. A work
plan must specify the work to be carried out in
terms of sequence and safe working.
Nova Flair is a registered trademark of the electronic
register of old appliances (ear).
Our registration number with the Foundation
for Waste Electrical Equipment Register:
WEEE-Reg.-Nr. DE 22364359
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
8
B INSTALLATION INSTRUCTIONS AND INSTRUCTIONS
FOR USE
Instruction Manual Taifun II Premium GreenTech
Function
Thenaildustcollectorisswitchedonandoviathe
green push button.
The speed control is used for stepless adjustment of
the power. of the power.
Cleaning
Use the hand screws (knurled screws) to loosen the
removable front panel and carefully pull out the acti-
vatedcharcoallamellalterslowlyusingaloop.
For this purpose, it is best to use our additionally
available dust collection tray.
Theactivatedcharcoallamellaltersshouldbetaken
out and cleaned about 2 2-4 times per month. The
remaining coarse dust is simply removed by pulling
out the large dust collection tray (optionally available)
and disposed of. If there is no dust collection tray, the
dust must be sucked out from the inside through the
largelteropeningswithahooverandanarrowcre-
vice nozzle attachment or similar.
Alsoclean orvacuumthe lamella lterverycarefully
on the lower side only (not the clean air side at the
top). Do not treat it wet and replace it after approx.
one year.
The replacement of the lters and the frequency of
cleaningcanvarydependingontheeort,careand
customer volume.
1. Carefully unpack the nail dust collector
andrstcheckthattheblackrubberseals
on the edges stick properly.
2. Place the nail dust collector on the under-
side of the table top and adjust it so that
the cut-out for the ventilation grille is as
central as possible (see sketch).
3. Use the jigsaw etc. to make a cut-out in
the centre with a diameter of Ø 160 mm.
4. Nowyoucanxthenaildustcollectorwith
suitable screws. (not included in the deli-
very).
Please pay attention to the length of
the screws!
If anything is unclear, please contact us via the communication channels known to you. It will then be explained
to you again in detail.
Kaitstud / Secured by https://mereneid.eu/

9
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
C INFORMATION ABOUT THE SYSTEM / TECHNICAL DATA
Professional nail dust collector for under-table installation
Dust collector Type Taifun II Premium GreenTech
Year of manufacture See type plate of the
respective system
The above-mentioned dust nail dust collector was combined with individual machine
partsfromdierentmanufacturerstoformannaildustcollector.
Nova Flair
GmbH & Co. KG
System part Type and designations Manufacturer
Electrical Connec-
ted loads
230 V
50 - 60 Hz
160 W
Aluminium housing Housing made of anodised aluminium sheet, powder-coated, dimensi-
ons W/H/D approx. 85 x 38 x 115 [cm].
Net weight 8 kg
Switch/button Illuminated single-pole ON-OFF push button
Fuse 2A Inert Weltron-
Elektronik GmbH
Fans 2x Radial blower type R3G146-AH23-01 ebm-papstMulngen
GmbH & Co. KG
Filter 2xnedustlamellalterwithanactivatedcarboncoatingandalter
surface of 3,200 [cm²] each
Maximumowrate 530[m³/h]Airvolumeow
Final pressure dif-
ference maximum 420 [Pa]
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
10
Harmonised standards for the Machinery Directives:
EN ISO 13857 Safety of machinery - 2008-03
Safety distances against reaching from reaching danger zones
with the upper and lower limbs
EN 61310-1 Safety of machinery - displays, 2008-02
  Identicationandoperation.Part1:Requirementsforvisible,
audible and tactile signals
EN 61310-2 Safety of machinery - displays, 2008-01
Marking and operating - Part 2: Requirements for marking
EN 61310-3 Safety of machinery - displays, 2008-02
Marking and operating - Part 3: Requirements for the arrangement
and operation of control elements (actuators)
The above product is compliant with the requirements of the following documents:
For the product described below:
Subject of the declaration: Professional nail dust collector
Type/Model: Taifun II Premium GreenTech
2006/42/EG Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on
machinery and amending Directive 95/16/EC (recast).
2014/30/EU Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014
on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility (recast).
2011/65/EU Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment Electronic Equipment (recast)
D EU DECLARATION OF CONFORMITY
Document no. Title
Reference Title Issue date
is hereby declared to be in conformity with the essential requirements set out in the harmonisation
legislationidentiedbelow:
Kaitstud / Secured by https://mereneid.eu/

11
Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
EN 55014-1 Electromagnetic compatibility - Requirements for 2006-12
EN 55014-1/A1 household appliances, electric tools and similar apparatus 2009-05
EN 55014-1/A2 Part 1: Emission 2011-09
EN 55014-2 Electromagnetic compatibility - Requirements for 1997-02
EN 55014-2/AC household appliances, electric tools and similar apparatus 1997-12
EN 55014-2/A1 Part 2: Immunity - Product family standard 2001-12
EN 55014-2/A2 2008-10
EN 61000-3-2 Electromagnetic compatibility (EMC) 2014-08
Part 3-2: Limits - Limits for harmonic currents (equipment
input current <= 16 A per conductor)
EN 61000-3-3 Electromagnetic compatibility (EMC) 2013-08
Part 3-3: Limits - Limitation of voltage changes & variations and
  ickerinpubliclow-voltagesupplysystemsforequipmentwitha
rated current <=16 A per conductor and not subject to a special
connection condition
ThesoleresponsibilityfordrawingupthisEUdeclarationofconformityinrelationtothefullment
of the essential requirements and the preparation of the technical documentation shall lie with the
manufacturer:
Additional information:
1. This declaration applies to all specimens manufactured in accordance with the relevant production dra-
wings - which are part of the technical documentation. Further information on compliance with the above
references is given in the supporting documentation attached to the declaration of conformity. supporting
documentation attached to the declaration of conformity.
Harmonised standards for the EMC Directive:
The declaration is made by:
Name,rstname:  Herb,Albert
Function:   ManagingDirector/AuthorisedDocumentOcer
Name: Nova Flair GmbH & Co. KG
Address: An der Ronceva 10-12 | 32312 Lübbecke | Germany
Date Place Company stamp and signature Managing Partner
01/01/2022 Lübbecke
Kaitstud / Secured by https://mereneid.eu/

Nova Flair GmbH & Co. KG
An der Ronceva 10-12 | 32312 Lübbecke | Germany
January 2022
Kaitstud / Secured by https://mereneid.eu/