EcoFlow EFM100-MT User manual

POWER KIT CONSOLE
EFM100-MT
User Manual V1.1

EN
Disclaimer
Read this user manual carefully before using the product to ensure that you
completely understand the product and can correctly use it. After reading this
user manual, keep it properly for future reference. Improper use of this product
may cause serious injury to yourself or others, or cause product damage and
property loss. Once you use this product, it is deemed that you understand,
approve and accept all the terms and content in this document. EcoFlow is not
liable for any loss caused by the user's failure to use the product in compliance
with this user manual.
In compliance with laws and regulations, EcoFlow reserves the right to nal
interpretation of this document and all documents related to the product. This
document is subject to changes (updates, revisions, or termination) without
prior notice. Please visit EcoFlow's ocial website to obtain the latest product
information.

EN
Contents
Technical Parameters
Getting Started
Product Features
Safety Instructions
Product Installation
Product Usage
Basic parameters
Product Overview
What's in the box
Button functions
Software Functions
USB Port Functions
Software Upgrade
1
1
1
2
2
1
3
3
5
5
5
5
6
FAQs 8
FCC Statement 9

EN
1
Technical Parameters
Getting Started
Basic parameters
Product Overview
450 g (1lb) (Bracket included)
204.5 mm × 113.3 mm × 22.3 mm /
(8" × 4.5" × 0.9")
Supported
12V / 1A, 12W Max
5V / 2A, 10W Max
5V / 1A, 5W Max
-20°C to 50°C (-4°F to 122°F)
154.2 mm × 85.9 mm (6" × 3.4")
1024 (H) × 600 (V)
Net weight
Screen size
Screen resolution
Touch control
DC Input / RJ45
DC Input / USB-C
DC Output / USB-A
Operating temperature
Dimensions
3
1. Power Button 2. Touch Screen 3. RJ45 CAN Bus Port
1
2

EN
2
Product Features
This Power Kit Console is used to monitor the EcoFlow Power Kits in real time. Through
it, you can switch the EcoFlow energy storage on or o, congure parameters, and view
usage data.
4. USB-A Port 5. Installation Buckles 6. USB-C Port
56
Adhesive × 1
RJ45 CAN Bus cable
(6m / 20 Feet) × 1
Bracket × 1
User manual × 1
What's in the box
M3.5*16 (2pcs for
installation, 2 pcs for spare)
Power Kit Console × 1
4

EN
3
Safety Instructions
1. Do not use this product in environments with high temperature, high humidity, strong
magnetic eld, or strong static electricity.
2. Do not disassemble this product in any way or pierce it with sharp objects.
3. Do not use unocial components or accessories. If components or accessories need
to be replaced, purchase them from the EcoFlow ocial sales channels.
4. Do not stack other heavy objects on this product.
5. Please avoid impact, falls, or severe vibrations when using the product. In case of a
severe external impact, turn off the power supply immediately and stop using the
product. Ensure the product is well fastened during transportation and usage to avoid
vibrations and impacts.
6. If there is dirt on the ports of the product, clean it with a dry cloth.
7. Keep this product out of reach of children and pets.
Product Installation
1. This product uses a xed installation method. Use the bracket delivered with
this product to install it.
2: Install this product in a dry and well-ventilated environment. Power o the
product before installation. Do not install with the power on.
3: Make sure the bracket is mounted horizontally on the wall.
1：Mount the matching bracket on the wall using adhesive or screws.
Mounted using screws
Mounted using adhesive

EN
4
2. Insert the communication cable (network cable) of the system to the RJ45 port of this
product.
3. Align the installation buckles of this product with the slots of the bracket and slide the
product into the bracket from the top and down.

EN
5
USB-C: Used for a backup power supply or softwrae upgrade (not required)
USB-A: 5V/1A power output supported , which can power on some USB peripherals, such
as MiFi modules.
Product Usage
Button Functions
USB Port Functions
Press (0.5 s): Turn the screen on/o. Press and hold (3 s): Power the product on or o.
(The product software may vary slightly due to function optimization and
upgrades. The actual functions prevail.)
1. View the battery level, remaining charging and discharging time, input and output
power.
2. Set the AD/DC output switch.DC output voltage and DC output data.
3. Set AC input.
4. Set maximum discharge level and minimum charge level.
Software Functions
3s

EN
6
Connect to a Wi-Fi network. Tap the name of the Wi-Fi you want to connect to and enter
the password.
Software Upgrade
Tap the Settings icon in the top right corner of the homepage to enter the Settings menu.

EN
7
Check for online updates and tap Upgrade.