EcoFlow River 600 User manual

User Guide
Contact us:
www.ecoflow.com
WARNING
1. Keep EcoFlow RIVER 600 (hereinafter referred to as RIVER)
and the accessories dry. DO NOT expose the product and
accessories to high heat.
2. Never disassemble, puncture, shock, damage, or incinerate
the product.
3. Recycle and dispose of RIVER in accordance with local laws
and regulations.
4. Pay attention to safety when handling the RIVER.
5. People living with disabilities or children should use the
product under the protection of a supervisor.

The following terms are used in this document to indicate various levels of potential harm that may be caused
by improper operation.
The instructions, if not properly followed, may result in property damage and minor physical damage.
The instructions, if not properly followed, may result in property damage and serious physical damage.
The instructions, if not properly followed, may result in property damage, major accident and serious injury.
Product Use:
Product Safety Guidelines
Glossary
NOTICE
CAUTION
WARNING
WARNING
WARNING
Read the ENTIRE user manual to be familiar with the features of this product before operating. Failure
to operate the product correctly may result in damage to the product or personal property and cause
serious injury. EcoFlow will not assume any legal responsibility. DO NOT use the product with
incompatible components or alter the product in any way without following the instructions provided
by EcoFlow. Failure to follow these instructions will render EcoFlow after-sales services and the product
warranty void. These Safety Guidelines include instructions for safety, operation and maintenance. It
is important to read and follow all the instructions and warnings in the user manual before assembly, set-
up, or product use.
1. DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries
out in the rain or near a source of moisture. Moisture in the device could cause short circuits, component failure,
fires or even an explosion.
2. Never use non-EcoFlow parts. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no re-
sponsibility for any damage caused by the use of non-EcoFlow parts.
3. Never install or remove other modules from the RIVER when it is turned on. DO NOT plug or unplug other
modules when the power of the product is turned on, otherwise the power interface may be damaged.
4. The product should be used in temperatures between -4ºF and 140ºF (-20°C and 60°C). The use of the
product in environments above 140ºF (60°C) may cause fires or explosions. The use of the product below -4ºF
(-20°C) will severely affect the performance of the product. Allow the product to return to a normal operating
temperature before using it.
5. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery
control board may malfunction and cause a serious accident during use.
6. Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
7. DO NOT use the product if it was involved in a crash, accident, or a heavy fall.
8. If the product falls into the water during use, take the product out immediately and put it in a safe and open
area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as de-
scribed in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extin-
guishing equipment in the following order: water or water mist, sand, fire blanket, dry powder fire extinguisher,
and a carbon dioxide fire extinguisher.
Improper use may result in fire, property damage, or personal injury. Make sure to use the product ac-
cording to the following safety rules and guidelines.

Travel Notice:
Product Battery Disposal:
Product Storage and Transportation:
Product Charging:
RIVER Usage and Safety Guide
NOTICE
9. DO NOT put the device in a microwave oven or in a pressurized container.
10. DO NOT allow pins, wires, or other metal pieces to enter the device case, outlets, or controls. Metal pieces
may short circuit the product.
11. Avoid collisions. DO NOT place heavy objects on the device.
12. If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and
result in energy loss or the inability to charge the device.
1. Always use EcoFlow approved charging cables. EcoFlow does not take any responsibility for any damages
caused by using non-EcoFlow charging cables.
2. When charging, please place the product on the ground with no flammable or combustible materials around
it. To prevent accidents, never leave the device unattended during charging.
3. DO NOT charge the device immediately after a long heavy load, because the device temperature may get
too high. DO NOT charge the device until it cools down to room temperature. The device may be unable to
charge when it is out of the temperature range: 32ºF to 104ºF (0 to 40°C ). The ideal charging temperature
range is 71ºF to 82ºF (22°C to 28°C ).
1. Keep the product out of the reach of children. If any child accidentally swallows any parts, please go to a doc-
tor immediately.
2. If a low-battery warning appears, charge the battery before storing it. Otherwise, long-term storage may
cause damage to the battery. Batteries in the product will enter hibernation mode if they are depleted and
stored for a long time. Recharging the product can bring the battery out of hibernation.
3. DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, or a heating stove.
4. Store the product in dry environments. Please keep the device away from water.
5. Make sure no small metal objects can fall on or around the product while it’s being stored.
6. Never ship a product with a battery power level higher than 30%.
It is forbidden to carry lithium batteries above a specific capacity on airplanes due to flight regulations. Please
check local flight laws and regulations. Do not bring this product on flights.
1. Dispose the product in specific recycling boxes only after a complete discharge. Batteries are hazardous
chemicals. Please strictly follow your local regulations regarding the battery disposal and recycle.
2. Dispose of the product immediately if it cannot be powered on after over-discharging.
To turn RIVER on or off, you need to PRESS and HOLD the ON/OFF System Power Button. To turn on the
AC power outlet, you need to PRESS and HOLD the AC Button after turning on RIVER. The AC Button can
be used to save power. Please follow this step-by-step introduction to understand RIVER’s buttons, display
screen, and more.
Please fully charge (100%) RIVER before using it.

FCC Statement:
FCC Radiation Exposure Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE

EcoFlow App Guide 1
2
3
4
7
8
9
10
11
12
13
RIVER Features
User Interface Introduction
Protection and Error Information
Solar Panel Connection
Entry-Level UPS
AC X-Boost Mode
Technical Specifications
How to Recharge RIVER 600
FAQs
What’s in the Box
CONTENTS

1Power A Free Life
1. EcoFlow App Download Guide
EcoFlow App Guide
Search for “EcoFlow” in Google Play Store or App Store to download the app.
You can also scan this QR code with your phone, or you can enter the down-
load link in your browser:
https://ecoflow.com/pages/ecoflow-app
2. For more information, please follow the instructions in the app or on our official
website www.ecoflow.com.

2
Power A Free Life
1. LCD Display
2. USB-A Output Ports
3. LED Light ON/OFF Button
4. IOT Reset Button
(PRESS & HOLD for 3s to reset Wi-Fi)
5. USB-C 100W Output Port
6.Power Button & LCD Display Screen
7.DC Output ON/OFF Button (Car Outlet,
2 DC 5521 Output Ports) & DC Output Indi-
cator
8.Fast Charge USB-A Output Port
9.AC Power Button (PRESS to turn the
product ON/ OFF) AC Output Indicator
10. 3 AC Output Sockets (100-120V ver-
sion)
2 AC Output Sockets (220-240V version)
11. Ventilation Fan
12. X-Stream Charging Input Port
13. Overload Protection Switch
14. Solar Charge / Car Charge Input Port
15. Power Earth Screw
220-240V Dedicated AC Output*
RIVER Features
15
141312
*EcoFlow has designed different AC output sockets
following the local regulations of different countries
9
11
10
7
8
1
2
3
65
4

3Power A Free Life
i
j
User Interface Introduction
This number indicates the remaining charge / discharge time (mins) for RIVER.
a. Remaining Charge/Discharge Time
d. High Temperature Indicator
e. Low Temperature Indicator
f. Fan Indicator
g. Current Input
h. Current Output
Shows the fan speed, which is controlled by RIVER automatically.
Shows the current input power of RIVE in watts.
Shows the current output power of RIVER in watts.
Shows the remaining power (%). If the display shows 0%, please charge RIVER immediately.
b. Battery Level Indicator
c. Battery Level Percentage
Shows the remaining power. The icon rotates while charging.
When the temperature of the RIVER is too high, a high-temperature warning icon appears on the screen.
Please cool down the product before use.
When the temperature of the RIVER is too low, a low-temperature warning icon appears on the screen.
Please warm up the product properly before use.

4
Power A Free Life
Protection and Error Informationformation
i. Overload Warning
j. Port Usage Indicators
Indicates the usage status of each port.
Shows an overload icon when the unit is overloaded, and indicates which module of the unit is overloaded.
The RIVER display screen showcases different icons to indicate errors or prompts to help you
protect your device. Read the information below to understand the icons and what to do when
they appear.
USB-A Overload
Protection
Icon(s): USB-A and OVERLOAD icons flash together.
What to do: Disconnect all electrical appliances and
wait 10 seconds before connecting each appliance
again.
USB-C High-Temperature
Protection
High-Temperature
Recharging Protection
High-Temperature
Discharging Protection
Low-Temperature
Recharging Protection
Low-Temperature
Discharging Protection
Icon(s): USB-C and High-Temperature icons flash to-
gether. What to do: Let RIVER 600 cool down before
connecting the appliances.
Icon(s): Recharging Time, Battery Exclamation, and
High-Temperature icons flash together.
What to do: This happens when you charge your
device immediately after using the unit heavily. Let
RIVER 600 cool down before recharging.
Icon(s): Battery Exclamation and High-Temperature
icons flash together.
What to do: The power supply can be resumed after
the battery is cooled down.
Icon(s): Recharging Time, Battery Exclamation, and
Low-Temperature icons flash together.
What to do: Place RIVER in a warmer place before re-
charging.
USB-C Overload Protection
Icon(s): The USB-C icon and the OVERLOAD icon
flash together.
What to do: Unplug the appliances, the unit will auto-
matically resume operation after 10 seconds.
Icons(s): Battery Exclamation and Low-Temperature
icons flash together.
What to do: Place RIVER in warmer place before turn-
ing the power back on.

5Power A Free Life
Overload
Recharging-protection
Overload Discharging
Protection
Communication Failure
between the Main Board
and BMS
Icon(s): Battery Exclamation and OVERLOAD icons
flash together.
What to do: Disconnect all appliances, restart the RIV-
ER, and connect each of your appliances back in. Note:
electrical appliances can only be operated within the
specified power range.
Light stays on
Icon(s): Recharging Time, Battery Exclamation, and
OVERLOAD icons flash together.
What to do: Unplug the charging cables, restart the
RIVER 600, and plug back the charging cables back
in. If the light keeps flashing contact
customer servic
Icon(s): Exclamation icon flashes.
What to do: Restart the RIVER. If the icon keeps
flashing, contact customer servic.
customer servic
Icon(s): Exclamation icon flashes.
What to do: Restart the device. If the light stays on,
contact
customer servic.
Communication Failure
between the Main Board
and AC
Inverter Output Overload
Inverter High-Temperature
Protection
Inverter Low-Temperature
Protection
Icon(s): AC icon flashes.
What to do: Restart the RIVER 600. If the icon
keeps flashing, contact
customer servic.
Icon(s): AC and OVERLOAD icons flash together.
What to do: Wait 10 seconds, turn the AC power off.
Please note that all electrical appliances must be
operated within the specified power range. (For more
information about specific appliance use and the
X-Boost function, go to page 12).
Icon(s): AC and High-Temperature icons flash togeth-
er.
What to do: Let RIVER cool down. Turn the AC Power
off; the unit will automatically recover.
Icon(s): The AC and Low-Temperature icons flash
together.
What to do: Move RIVER to a warmer place and wait
for the inverter to warm up. Turn the AC Power off;
the unit will automatically recover. If it doesn’t, con-
tact
customer servic.
Fan Blockage
Icon(s): Fan icon flashes.
What to do: Turn the RIVER off, carefully clean the
unit, and vacuum around the fan vents on both ends
of the product. Turn the unit on, if then Fan Blockage
icon keeps flashing, contact
support @ecoflow.com

6
Power A Free Life
Car Charger Overload
Car Charger High-Tempera-
ture Protection
Icon(s): Car and OVERLOAD icons flash together.
What to do: Restart RIVER, make sure all electrical
appliances are used within the specified power range.
Icon(s): Car and High-Temperature icons flash togeth-
er.
What to do: Turn off the unit and wait for RIVER to
cool down. The unit will automatically recover.

7Power A Free Life
Connecting the Solar Panels
How to Recharge the RIVER Using Solar Panels
For full step-by-step instructions about how to connect RIVER with solar panels, please refer to the Solar Panel
User Guide.
The RIVER can support a 10-25V DC input. When the input exceeds 25V, the RIVER overvoltage
protection will be activated. Over voltage may damage the product. Users should read these in-
structions carefully because any incorrect use of solar panels that leads to product damage will
void the EcoFlow warranty.
Charging Method 1
RIVER Charging Port
XT60 Connector
RIVER
MC4 Connector
SOLAR PANEL-21.6V
Users can connect a solar panel as shown in Example 1. DO NOT attempt to connect more than one solar panel
in series.
1. Connect to EF MC4 to XT60 solar charge cable. Connect the XT60 connector to the RIVER’s XT60 input port
to charge the device. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in Ex-
ample below.
2. If you want to connect 2 pieces of solar panels, connect them with our solar MC4 parallel connection cable.
Con- nect the XT60 connector to the RIVER’s XT60 input to charge the device. The parallel connection cable is
an optional accessory that is purchased separately.
Note: The EcoFlow Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased
separately. The charging methods below are with respect to using the EcoFlow 110W Solar Panel.
1. Recommend Charging Method

8
Power A Free Life
Charging Method 2: (Parallel Connection Only)
RIVER Charging Port
XT60 Connector
SOLAR PANEL-21.6V X2
Solar MC4 parallel connection cable
* Users need to buy the solar panels and related
parallel connection
accessories on their own.
RIVER
2. Connecting Third-Party Solar Panels to RIVER
SOLAR CABLE
SOLAR PANEL
-
+ +
-
Users can buy their own third-party solar panels to power RIVER, provided that the solar panels have a standard
MC4 connection and the voltage and current (10-25V DC, 12A Max) comply with the specifications of RIVER.
The third-party solar panels will be able to recharge RIVER through the MC4 to XT60 cable. EcoFlow does not
provide free repair services for any damage to the power station caused by third-party products.
RIVER Entry-level UPS Use Reminder
Entry-Level UPS
RIVER’s X-Stream system supports an entry-level UPS function. You can use the RIVER AC socket while the device
is connected to a wall socket with an AC power supply (the AC power comes from the grid, not the battery). In
the event of a loss of grid power, the RIVER battery power will be activated automatically in <30ms to ensure a
continuous flow of power. This is an entry-level grade UPS function that does not support 0ms switching.
Do not connect devices that have uninterrupted power supply requirements. Please perform multiple tests with
data servers and workstations when connecting them to RIVER. EcoFlow will not be responsible for any loss
of data or equipment damage caused by failure to follow these instructions.

9Power A Free Life
Entry-Level UPS User Guide
AC X-Boost Mode
Users can connect the AC charging cable of RIVER to grid power, connect a device to RIVER, and turn on the
AC switch to automatically enter the entry-level UPS mode. When the external power is cut off, power will be
supplied from the battery of RIVER immediately to power your device (as shown below).*
UPS is only applicable to electrical appliances below 600W. Please do not use other equipment at the same
time to avoid overloading the power station. EcoFlow is not responsible for any detrimental operations or
data loss caused by careless use. Only one RIVER can conduct the UPS function; the UPS function is not avail-
able when more than one RIVER is connected together. Please follow the connection instructions below:
The EcoFlow X-Boost featured is recommended for use when powering devices between 600W-1200W. As a
result, there is no need to buy additional devices in order to power different products. Traditional inverters will
overload when one electrical appliance with a higher rated power is connected. Please take note of the following
when using X-Boost:
1. The X-Boost mode is enabled by default. You can use the EcoFlow app to turn this function on/off. Please
do not connect the AC output to grid power when the X-Boost mode is on, doing so will activate the low-volt-
age protection of the power station;
2. The X-Boost mode is not available when using a parallel connection or when charging;
3. When using appliances with a rated power of 600W-1200W, please connect only one appliance. When con-
necting more than one electrical device, the change of voltage may affect the usage of other electrical devices.*
* The X-Boost mode is not applicable for all electrical devices. Some devices with a rated power of
600W-1200W that have strict voltage requirements are still not compatible. Please conduct a full test to
confirm before usage. X-Boost is recommended for electrical equipment with heating elements and a rated
power between 600-1200W, such as hair dryers, kitchen appliances, or tools.

10
Power A Free Life
Technical Specifications
General Specs
Outputs
Input
Battery
Net Weight
Dimensions
Capacity
Testing and certification
AC Output (x3) /
(x2 International Version) Full Sine Wave
USB-A Output (x2)
USB-A Fast Charge (x1)
USB-C Output (x1)
Car Power Output (x1)
DC5521 Output (x2)
Solar Charge Input
Car Charger (Example 2)
AC Charge Input Power (Example 1)
Cell Chemistry
Discharge Temperature
Charge Temperature
Shelf Life
Cycle Life
Lithium-ion
-4°F to 140°F (±5°F), -20°C to 60°C (±3°C)
32°F to 113°F (±5°F), 0 to 45°C (±3°C)
1 Year (after fully charging the device)
500 Cycles (80%+)
AC Charge Input Voltage 100-120Vac (50Hz/60Hz)
International Version 220-240Vac (50Hz/60Hz)
200W 10-25V DC 12A max
12V/24V DC 10A max
X-STREAM Charge 250W Max
/500W Max (With Extra Battery)
600W (Surge 1200W) total, 120Vac (50Hz/60Hz) /
230Vac (50Hz/60Hz)
5V DC, 2.4A, 12W Max, per port
5V DC, 9V DC, 12V DC, 2.4A, 28W Max
5V DC, 9V DC, 12V DC, 15V DC, 20V DC, 5A, 100W Max
136W, 13.6V DC, 10A Max
13.6V DC, 3A Max(per port)
11lbs (5kg)
11.3in x 7.3in x 7.7in (28.8cm x 18.5cm x 19.4cm)
288Wh (28.8V)/576Wh With the Extra Battery
UL Standard, CE, FCC, RoHS
* Please Note: The following information has been obtained under supervised test conditions.

11 Power A Free Life
AC Cable
XT60 Connector
0-80% charged in 1 hour
0-100% charged in 1.6 hour
Example 1:
Example 2:
0-100% < 3 hours
How to Recharge RIVER
<2 hrs
<3 hrs
X-Stream Charging
(250W Max)
Car Charger
(120W Input)
(AC charging cable included)
(Car charge cable
included)
Can RIVER Power Devices and Charge at the Same Time?
RIVER has an AC charging port and an XT60 charging port located on the side of the device. RIVER can be
charged with a 12V car charger, solar panels, or with AC power.
Yes, RIVER can power devices at the same time as charging.

12
Power A Free Life
How to Store RIVER?
How to Use RIVER Safely?
How to Upgrade RIVER Firmware?
RIVER FAQ
How to Clean RIVER
RIVER is a versatile, durable power station that can be used in many types of applications. You can clean
RIVER using a dry, non-abrasive cloth. Use a phone or screen cleaning spray if you need to clean RIVER more
thoroughly. DO NOT expose RIVER to excessive amounts of liquid, as doing so can damage the product or
result in injury.
Please use RIVER in its recommended operating temperature range. Using RIVER out of the optimal oper-
ating temperature range may cause the power station to exceed safety limits. Incorrect product usage and
failure to adhere to operating recommendations will void the product warranty.
If RIVER is used to power electrical devices with heating elements for over 30 minutes, such as a hairdryer,
the power station will enter a temperature protection mode. In this case, please wait for around an hour be-
fore charging, powering devices, or using the power station again.
RIVER firmware can be upgraded using the EcoFlow app. It is recommended that RIVER is plugged in to an
AC power source, or it has 50% power and the system power is ON when upgrading. For more details, please
refer to the “How to upgrade firmware” FAQ in the EcoFlow app.
1.Store RIVER in a dry and cool environment, away from any abrasive objects. Never store RIVER in environ-
ments below -4°F (-20°C) or above 140°F (60°C). DO NOT store or place RIVER near water;
2. If RIVER is not used for a long period of time, the battery life may be impacted. Discharging RIVER to
30%, then charging to 85% every 3 months can help prolong the battery life;
3. After being fully charged, RIVER has a shelf life of over a year under the room temperature and humidity,
provided that the power station isn’t used to charge or discharge during storage.

13 Power A Free Life
EcoFlow RIVER
User Manual and
Warranty Card
DC5521-DC5525
Cable
AC Charging Cable
(1.5m)
Car Charging Cable
(1.5m)
Solar Charge Cable
(MC4 to XT60 Input)
What’s in the Box

Guide de l’utilisateur
Nous contacter:
www.ecoflow.com
AVERTISSEMENT
1. Rassurez-vous que l'appareil EcoFlow RIVER 600 (ci-après
dénommé RIVER) et ses accessoires soient toujours sec.
N'exposez pas l'appareil et ses accessoires à une chaleur élevée.
2. Ne jamais démonter, percer, choquer, endommager ou
incinérer le produit.
3. Recyclez et éliminez votre RIVER conformément aux lois et
règlements locaux.
4. Veillez toujours à votre sécurité lors de la manipulation du RIVER.
5. Les personnes vivant avec un handicap ou les enfants
doivent utiliser le produit sous la protection d'un superviseur.
EcoFlow RIVER

Les termes suivants sont utilisés dans ce document pour indiquer les diérents niveaux de dommages potentiels
qui peuvent être causés par une mauvaise utilisation.
Le non-respect de ces instructions peut entraîner des dommages matériels et des dommages physiques mineurs.
Le non-respect de ces instructions peut entraîner des dommages matériels et des dommages corporels graves.
Le non-respect de ces instructions peut entraîner des dommages matériels, un accident sérieux et des blessures graves.
Utilisation de l’appareil :
Consignes de sécurité du produit
Glossaire
NOTIFICATION
MISE EN GARDE
AVERTISSEMENT
AVERTISSEMENT
AVERTISSEMENT
Lisez le manuel d’utilisation dans son intégralité pour vous familiariser avec les caractéristiques de ce
produit avant de l’utiliser. Un fonctionnement incorrect du produit peut entraîner des dommages au
produit ou aux biens personnels et causer des blessures graves. EcoFlow n’assume aucune responsabil-
ité légale. N’utilisez pas le produit avec des composants incompatibles ou ne modifiez pas le produit
de quelque manière que ce soit sans suivre les instructions fournies par EcoFlow. Le non respect de
ces instructions rendra le service après-vente EcoFlow et la garantie du produit nulle. Ces directives de
sécurité comprennent des instructions relatives à la sécurité, au fonctionnement et à l’entretien. Il est
important de lire et de suivre toutes les instructions et tous les avertissements figurant dans le manuel
d’utilisation avant l’assemblage, l’installation ou l’utilisation du produit.
1. N’exposez PAS le produit à des liquides. Ne pas immerger le produit dans l’eau. NE laissez PAS la batterie sous
la pluie ou à proximité d’une source d’humidité. L’humidité dans l’appareil pourrait provoquer des court-circuit,
des défaillances de composants, des incendies ou même une explosion.
2.Veillez à ne pas utiliser de pièces qui ne sont pas de marque EcoFlow. Allez à la pagehttp://www.EcoFlow.com
pour acheter de nouvelles pièces. EcoFlow décline toute responsabilité pour tout dommage causé par l’utilisa-
tion de pièces qui ne sont pas de marque EcoFlow.
3.Ne jamais installer ou retirer d’autres modules du RIVER lorsqu’il est allumé. NE PAS brancher ou débrancher
d’autres modules lorsque le produit est mis sous tension, sinon l’interface d’alimentation pourrait s’endommager.
4.Le produit doit être utilisé à des températures comprises entre -4ºF et 140ºF (-20°C et 60°C). L’utilisation du
produit dans des environnements supérieurs à 140ºF (60°C) peut provoquer des incendies ou des explosions.
L’utilisation du produit à des températures inférieures à -4ºF (-20°C) affectera considérablement les perfor-
mances du produit. Laissez le produit retrouver une température de fonctionnement normale avant de l’utiliser.
5.N’utilisez PAS la batterie dans des environnements fortement électrostatiques ou électromagnétiques. Sinon,
la carte de contrôle de la batterie risque de mal fonctionner et de provoquer un accident grave pendant l’utilisa-
tion.
6.Ne jamais démonter ou percer le produit de quelque manière que ce soit. Sinon, il pourrait fuir, prendre feu ou
exploser.
7.N’utilisez pas le produit s’il a fait l’objet d’une collision, d’un accident ou d’une chute importante.
Une utilisation incorrect du produit peut entraîner des incendies, des dommages au produit ou aux biens
personnels et causer des blessures graves. Veillez à respecter les règles et directives suivants.