EcoQuest Ozone Blaster 20g User manual

Ozone Blaster 20g
20000 mg. Commercial Air Purifier
OWNER’S MANUAL
Please read all of the information provided in this owner’s manual
before operating your new Ozone generator.
EcoQuest International
310 T. Elmer Cox Drive • Greeneville, TN 37743 • [phone]
www.EcoQuest.company

CAUTION
RISK OF ELECTRICAL
SHOCK DO NOT
OPEN
ATTENTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVCE PERSONNEL.
This “bolt of lightning” indicates that uninsulated material within
your unit may cause anelectrical shock. For thesafetyof everyone,
do not remove product covering.
The Ozone generator is designed to
use in unoccupied spaces only.

Read ALL instructions carefully before using this product.
CAUTION!
In order to reduce the risk of leakage to damage
the instrument or person, it is important that be
properly grounded to avoid potential shock.

INTRODUCTION
This ozone generator is an advanced and convenient contaminant
remediation product. High-powered oxidation in a compact, rugged
and simple design. Utilizing controlled corona discharge ozone
technology developed specifically to reduce odors and smoke in
unoccupied spaces, ideal for treatment for large space etc. It is
with 4 grades adjustment, from 5000mg ozone output to 20000mg
ozone output.
Technology：
Utilizing controlled corona discharge ozone technology
Application:
Special designed for high ozone shock treatment.
in fire / flood restoration, crime scene cleanup , garbage
compactors, heavy restoration, auto detailing, all heavy odor
remediation tasks, food service sterilization packaging
manufacturing, bacteria or mold odors Home/ Commercial
decontamination, purifying rooms in hotels and for killing mold, and
more.
Feature:
Heat sink to reduce the heat on the ozone plate, for longer
working time
All inner terminals and screws are stainless steel
Stainless steel pre-filter to remove large particle
High quality electronic parts, UL listed bigger fan
Digital remote control (19~32ft. (6~10m))

Model:
HE-143
Rated Voltage:
Europe AC 220-240V/50-60Hz or
USA/Japan AC 100-120V/50-60Hz
Power Consumption:
270W
Supply gas
Ambient Air
Air Volume:
Max 170CFM
Active Oxygen(on) ：
5000-20000mg/h
Construction:
Stainless steel cabinet and inner
terminal and screws.
Ozone plate:
4pcs 5g ozone plates, 90*70mm
Remote Control/Manual:
19~32ft. (6~10m)
Fuse:
110-120 Volt, 6 Amp, 50/60Hz,
or 220-240 Volt, 3 Amp, 50/60Hz
Sound Level(DB):
55 Db.
Product size(mm):
202x379x215MM(without handle)
202x379x265MM(with handle)
Packing size:
450x290x340mm
Net Weight/Gross Weight:
6.2Kgs(13.6Lbs)/7.36（16.22Lbs）
Application Area:
Over 5000sq.ft (500m2)
Packing details:
1pc machine, 1pc remote control,
1pcs manual, 1pc power plug.

(Front View)
(Back View)

No.
Display
Function and operation instruction
1
Power
Standby mode: Machine turns on when press
Power button, it starts working at grade 1;
Power on mode: Machine turns off when
press the Power button
2
Timer
1. Press TIMER, display 1 hour
2. Press one time, It will increase 1 hour,
the max. is 9 hour, the min. is 1 hour
3. When the time setting is finished, press
NORMAL would shut off mode, and back to
normal working mode.
3
Normal
Press NORMAL, display 1 hour ,
and come to grade 2 as default
4
Ozone
Ozone output is divided to 4 grades: “1-2-3-4”
Grade 1: 5000mg ozone output;
grade 2: 10000mg ozone output;
grade 3: 15000mg ozone output;
grade 4: 20000mg ozone output.

No.
Display
LED display
1
Machine
working
status
Press POWER to turn on the machine
2
Ozone grade
Press OZONE to indicate ozone working
status, to display 1 to 4 ozone grade.
3
Countdown
display
Display the countdown clock.
4
Timing
reminder
Timing function is turned on.
5
Normal mode
reminder
Press NORMAL to indicate Normal mode
working status.
6
Ozone grade
Display 1 to 4 ozone grade
7
Ozone
working
status
Ozone function is turned on

No
Name
Function and operation instruction
1
Power
Standby mode: it turns on when press
Power, start working at grade 1;
Power on mode: it turns off when press the
Power
2
Ozone up
Increase the ozone output, it is “1-2-3-4”
3
Ozone down
Reduce the ozone output, it is “4-3-2-1”
4
Timer
1. Press TIMER, display 1 hour
2. Press one time, It will increase 1 hour,
the max. is 9 hour, the min. is 1 hour
3. When the time setting is finished, press
NORMAL would shut off mode, and back to
normal working mode.
5
Normal
Press NORMAL, display 1 hour ,
and come to grade 2 as default

The Ozone generator is designed to use in unoccupied
spaces. The unit has a timer that will enable it to run for a
maximum duration of 9 hours. It will then shut the Ozone
generator off. You should allow 40-60 minutes before
returning to the treated area.
To operate the Ozone Generator:
Before use, the device should be placed something under
the unit bottom for steady
Close off the desired area to be treated.
Remove all occupants and pets.
Position the unit as close as possible to the odor source.
In such environments as motels that have individual heating
and cooling systems, turn the fan on and set on re-circulate.
Set timer to desired time and leave the room.
Allow 40-60 minutes before re-entering the treated space.
Return to space & ventilation area.
Remarks：
After closing the machine, the fan and one ceramic ozone
plate will work delay one minute to cool the machine.

When the air purifier no longerproduces enough ozone to be effective,
the ozone plates should be replaced.(Usually they should be replaced
after 6000 hours)
How to replace the ozone plate:
1) Turn the unit off and unplug from outlet.
2) Use a screw driver to unfasten cover screw and remove cover.
3) Pull ceramic plate out of ozone generator module.
4) Install ceramic plate as shown in above figure (be careful not to
drop the plate).

How to clean the ozone plate:
Wash the stainless steel screen and ceramic plate using a spray
cleaner or detergent. Scrub with a stiff brush. A spray liquid cleaner
with ammonia or chlorine may also be used to remove any non-
visible adherents. Be careful not to drop the plate. Rinse plate
thoroughly in hot water and dry completely before reinstalling. A hair
dryer may be used to dry the plate more quickly.
When running the device, it has a burning smell, and/or appears to
be Ozone produces a smell or odor that smells like bleach or electric
smell. This is normal during Ozone use.
If you suspect a problem with your unit check the following:
1) Unit is plugged in properly.
2) It’s important that the Ozone Generator be properly grounded
to avoid potential shock.
Fuse is installed properly and in good condition.To replace fuse, pull out
the plasticfuse holder, remove oldfuse andinsert new fuse. (110-120Volt,
6Amp, or 220-240 Volt, 3 Amp) Refer to picture as follows:

Important
1. To extend the life, continuous power interval must be 30 seconds
or more, please unplug the device if the device are not used for
long-term. Also the device should be worked within the specified
voltage range.
2. User normal use of the product in accordance with the instruction
manual, the failure of the warranty period, can be a free repair.
3. If the following conditions are paid maintenance during the
warranty period:
Misuse, demolition, and modification caused the failure and
damage;
Drop and faults and damage caused by transport;
For other disasters or abnormal voltage caused by the failure or
damage.

The ozone generator commercial air purifier comes with a 1 Year Limited
Warranty.
This device is warranted to be free from all defects in material in normal
use for a period of 1 year from date of purchasing. The warranty is granted
only to the original purchaser. This warranty provides for the repair or
replacement of the unit, replacement product or parts may include re-
manufactured or refurbished parts or components.
This warranty does not cover part of the unit that requires replacement
under normal use. Any damages or malfunctions caused by negligence,
abuse, or use not in accordance with the owner’s manual are not covered
by this warranty. Likewise, any defects or damages caused by
unauthorized service.
EcoQuest International®
310 T. Elmer Cox Drive • Greeneville, TN 37743 • [phone]
www.EcoQuest.company