Edgarsson Gsm-vac4+lite User guide

EDGARSSON SECURITY DESIGNS

GSM-VAC4+LITE

VOICE & SMS GSM ALARM

COMMUNICATOR

INSTALLER’S MANUAL

V 1.0

EDGARSSON SECURITY DESIGNS, CILYMAENLLWYD HOUSE, LOGIN, WHITLAND, SA34 0XA

Phone 01437 563 900 Fax 01437 563475 Email info@edgarsson.co.uk

Web pages at www.edgarsson.co.uk

TABLE OF CONTENTS

1.1 R

ECORDING

MODE

................................................................................................................................................................................8

1.2 PLAY..............................................................................................................................................................................................8

1.3 PROGRAMMING TELEPHONE NUMBERS - TN....................................................................................................................9

1.3.1 TN remote programming by SMS....................................................................................................................10

1.4 PROGRAMMING INPUT STATUS - IN....................................................................................................................................10

1.4.1 IN parameter remote programming by SMS....................................................................................................11

1.5 DE

LAY

BEFORE

DIAL

– DD................................................................................................................................................................11

1.5.1 DD remote programming by SMS...................................................................................................................11

1.6 INPUT FILTER PARAMETR – ID.............................................................................................................................................12

1.6.1 Programming table to define the value of the input filter................................................................................12

1.6.2 ID parameter remote programming by SMS....................................................................................................12

1.7 PROGRAMM

ING

OUTPUT STATUS - OS.................................................................................................................................13

1.7.1 Programming table for output status................................................................................................................13

1.7.2 OS remote programming by SMS....................................................................................................................13

1.8 DIRECT ALARM OUTPUT – OD..............................................................................................................................................14

1.8.1 Programming table for OD – direct alarm output............................................................................................14

1.8.2 OD remote programming by SMS...................................................................................................................14

1.9 INPUTS AND TELEPHONE NUMBERS LINKING.................................................................................................................14

1.9.1 Programming table for linking the inputs and telephone numbers – LN.........................................................15

1.9.2 LN remote programming by SMS....................................................................................................................15

1.10 MAIN POWER LOST AND TELEPHONE N

. LINKING – LN5...........................................................................................15

1.10.1 Programming table for the MAIN POWER LOST and telephone numbers linking......................................16

1.10.2 LN remote programming by SMS..................................................................................................................16

1.11 LOW BATTERY AND TELEPHONE N

. LINKING – LN6...................................................................................................16

1.11.1 Programming table for LOW BATTERY and telephone numbers linking....................................................16

1.11.2 LN4 remote programming by SMS................................................................................................................17

1.12 MAIN POWER LOST FILTERLTER PARAMETR - MAIN .................................................................................................17

1.12.1 Programming table for “MAIN POWER LOST” filter – MAIN...................................................................17

1.12.2 “MAIN POWER LOST” filter remote programming by SMS......................................................................17

1.13 INPUT TIME WINDOW – IT....................................................................................................................................................18

1.13.1 The input time window remote programming by SMS..................................................................................18

1.14 INPUT TRIGGER COUNTER BEFORE BLOCK - AR ..........................................................................................................18

1.14.1 The input trigger counter before block remote programming by SMS..........................................................19

1.15 SECURITY LEVEL - SL............................................................................................................................................................20

1.15.1 Programming table for security level definition – SL....................................................................................20

1.15.2 SL parameter remote programming by SMS..................................................................................................20

1.16 PRE-PAY CARD CREDIT AND VALIDITY INFORMATION..............................................................................................21

1.16.1 Programming pre pay card credit and validity string.....................................................................................21

1.16.2 CC parameter for remote programming.........................................................................................................21

1.17 GSM-VAC4+ LITESET-UP PARAMERTERS ........................................................................................................................22

1.17.1 Set-up parameters programming by SMS......................................................................................................23

1.18 SMS MESSAGES EDITOR.......................................................................................................................................................24

1.18.1 Alarm messages remote editing by SMS command.......................................................................................24

1.19 DTMF REMOTE COMMAND TABLE....................................................................................................................................25

1.19.1 Receive all parameters (PALL) .....................................................................................................................26

1.19.2 Receive telephone numbers (PTN).................................................................................................................26

1.19.3 Receive links (PLN).......................................................................................................................................26

1.19.4 Receive input parameters (PIN).....................................................................................................................26

1.19.5 Receive input filter value (PID).....................................................................................................................26

1.19.6 Receive delay before dial value (PDD)..........................................................................................................26

1.19.7 Receive clip identification functions (PTC)...................................................................................................26

1.19.8 Receive access telephone numbers (PSL)......................................................................................................27

1.19.9 Receive output parameters (POS)..................................................................................................................27

1.19.10 Receive link for local alarm output (POD)...................................................................................................27

1.19.11 Receive all programmed SMS messages (P#)..............................................................................................27

1.19.12 Receive the power level on the unit (PPWR)...............................................................................................27

1.19.13 Receive set up parameters value (PPA)........................................................................................................27

1.19.14 State of the credit for the PRE-PAY CARD................................................................................................27

1.19.15 State of the outputs (PORC).........................................................................................................................28

1.20 CHECKING SYSTEM STATUS BY SMS COMMAND.........................................................................................................29

1.21 CHECKING SYSTEM STATUS BY DTMF COMMAND......................................................................................................29

1.22 CHAN

ING SYSTEM STATUS OFF TO ON (SYSTEM ON)................................................................................................29

1.23 CHAN

ING SYSTEM STATUS ON TO OFF (SYSTEM OFF)..............................................................................................29

1.24 CHECKING THE INPUT STATUS BY DTMF........................................................................................................................30

1.25 CHECKING THE INPUT STATUS BY SMS (INS).................................................................................................................30