EdgeStar TWR282S User manual

www.EdgeStar.com
WINE
866.512.4872
Thermoelectric Wine Cooler
Model: TWR282S
Thank you for choosing this quality EdgeStar product. This
quick-reference guide is designed to supplement your
owner’s manual and help you get your wine cooler up and
running as fast as possible. For more detailed information,
please check your owner’s manual.
If you would like more help or troubleshooting for common
issues, feel free to visit us online at www.edgestar.com
Included accessories
This wine cooler ships with six wire shelves (installed), four
adjustable leveling legs (installed), a handle, keys, and a “water
box”. For unpacking instructions, see the owner’s manual.
Problems?
°
While EdgeStar uses only the finest materials and processes to
design, manufacture, and distribute products, occasionally
problems occur.
For damaged products (in delivery) or non-defective returns,
contact your dealer.
For missing parts, warranty service, or general questions-
please contact our EdgeStar Customer Service Specialists at
866.512.4872
A note on thermoelectric cooling
This EdgeStar wine cooler uses a thermoelectric Peltier unit to
provide environmentally-friendly, CFC-free cooling. In
addition to energy efficiency, and the previously-mentioned
environmental-friendliness, thermoelectric cooling is very
quiet, making it ideal for homes and offices.
While thermoelectric cooling offers many benefits, the
cooling performance of thermoelectric units tends to
strongly correlate to the environment in which the units are
located. In other words- the cooler the environment, the
better the cooling perfromance of the wine cooler.
In light of the above, it is helpful to note that this wine cooler
was designed for use in a “room temperature” environment
(i.e., with ambient temperatures in the mid-70’s).
Temperature range
This wine cooler has a temperature range of low 50’s to mid
60’s (F) under ideal conditions (see Notes on thermoelectric
cooling for more info). As detailed above, you can set your
desired temperature using the controls.
For your reference, many wine experts suggest that 55°F is an
ideal temperature for storage of most varieties of wine.
However, the ideal drinking temperatures for most wines
differ. We suggest you do a little research to determine at
what temperatures you most enjoy your favorite wines, but
we suggest temperatures in the low 50’s for white wines and
“room” temperatures (or slightly cooler) for red wines.
Please note that this appliance is a wine cooler- not a refrig-
erator. If you feel that the wine cooler is not cold enough, we
suggest making sure the unit is on its lowest setting, giving
the unit at least 24 hours to cool, and making sure the unit is
not exposed to direct sunlight or excessive heat.
Power and controls
Once your wine cooler is completely unpacked and set up,
you can plug it in and begin using it.
Operation of the controls are quite simple- turn the thermo-
stat located at the top right rear of the inside of the unit to
control the temperature. Turn the thermostat clockwise to
decrease the temperature and counter-clockwise to increase
the temperature or turn off the cooling unit.
To turn the light on or off, locate the light switch (inside the
unit on the upper right side. This switch toggles the LED light
on and off.
Lock and handle
This wine cooler ships with a handle and lock. To install the
handle, follow the instructions in the owner’s manual.
To use the lock, close the door. Insert a key (included) into the
keyhole. Turn the key clockwise to lock the door. To unlock the
door, again insert the key into the keyhole. Turn the key
counter-clockwise.