EdgeStar TWR282S User manual

ii V2.1-07282017
Thermoelectric Wine Cooler
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com
TWR282S

i
Important Safety Information
Improper handling can cause serious damage to the EdgeStar wine cooler and / or injury to the
user. This wine cooler is designed for domestic indoor use only. Do not use the unit for
industrial or commercial use. Any other use may invalidate the warranty. Please review the
ratings label located on the rear panel of the unit for electrical and other technical data related
to this unit. The unit must be used in a properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire,
electric shock, or injury.
Electrical Safety
 Do not exceed the power outlet ratings.
 It is recommended the wine cooler be connected on its own circuit.
 The unit must be installed in accordance with state and local electrical codes.
 A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
 Use outlets that cannot be turned off by a switch or pull chain.
 Always turn the unit off and unplug it from the outlet when cleaning.
 Unplug the unit if it is not going to be used for an extended period of time.
 Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket.
 Be sure the wine cooler is properly grounded.
 Never plug or unplug the unit with wet hands.
 Do not bypass, cut, or remove the grounding plug.
 Do not use extension cords or power strips with this unit. You may need to contact your electrician if
it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power
cord’s length or share the outlet with other appliances.
 Do not start or stop the unit by switching the circuit’s power on and off.
 If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.
 Never repair the unit while it is plugged in.
 Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
 Do not remove any part of the casing unless you are instructed to do so by an authorized
technician.
 You should never attempt to repair the unit yourself.
 Contact customer service for service options if the unit needs service.

ii
Note: This owner’s manual is provided for reference use only. Specifications may change
without prior notice. Refer to the product label on the back of your wine cooler for the latest
technical information.
General Safety
 To prevent back and other types of injuries, use at least two people to move and install the wine
cooler.
 This appliance is not intended for use by persons, including children, with reduced physical,
sensory, or mental capabilities, unless they have been given supervision or instruction concerning
the use of the appliance by the person(s) responsible for their safety.
 The temperature range for this cooler is optimized for wine storage. Perishable food items may
require a different storage environment.
 Do not place hot or warm items into the cooler before they cool down to room temperature.
 This unit is designed to be installed indoors, and protected from rain, sleet, snow, and / or moisture.
 This unit is not intended to be used by children.
 Children should be supervised to ensure that they do not play with this product.
 Never allow children to crawl inside the wine cooler. If you are disposing of the unit, remove the
door.
 Do not use this cooler near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.
 Do not place the unit near heat sources such as ovens, grills, or direct sunlight.
 Only use in an upright position on a flat, level surface and provide proper ventilation.
 Do not pinch or kink the power supply line.
 Do not leave any cleaning solutions in the unit.
 Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may
damage the interior and exterior.
 Do not place any other appliances or allow anyone to sit on top of the unit.
 Do not operate the unit upside down, on its side, or at an angle off level.
 Do not move the unit without emptying the contents and securing the door in a closed position.

iii
Table of Contents
IMPORTANT SAFETY INFORMATION……………………………………………………………………………………...I
TABLE OF CONTENTS………………………………………………………………………………………………………..III
FIRST TIME OPERATING INSTRUCTIONS………………………………………………………………………………………….1
INTRODUCTION……………………………………………………………………………………………………………….. 1
PARTS IDENTIFICATION…………………………………………………………………………………………………….. 2
EXTERIOR VIEW………………………………………………………………………………………………………………….. 2
INTERIOR VIEW (WITHOUT DOOR)………………………………………………………………………………………………. 2
INSTALLING THE WINE COOLER………………………………………………………………………………………….. 3
UNPACKING THE WINE COOLER…………………………………………………………………………………………………. 3
TYPES OF INSTALLATION………………………………………………………………………………………………………….3
Free-standing Installation……………………………………………………………………………………………………… 3
INSTALLATION CLEARANCE REQUIREMENTS……………………………………………………………………………………..4
ELECTRICAL REQUIREMENTS……………………………………………………………………………………………………. 5
Recommended Grounding Method……………………………………………………………………………………………5
LEVELING THE WINE COOLER……………………………………………………………………………………………………. 5
OPERATION……………………………………………………………………………………………………………………. 6
INSTALLATION CHECK LIST BEFORE OPERATION……………………………………………………………………………….. 6
ADJUSTING THE TEMPERATURE…………………………………………………………………………………………………. 6
Internal Control Box……………………………………………………………………………………………………………. 6
NORMAL SOUNDS…………………………………………………………………………………………………………………7
DEFROSTING………………………………………………………………………………………………………………………7
PREPARING THE WINE COOLER FOR STORAGE………………………………………………………………………………….7
CLEANING AND MAINTENANCE……………………………………………………………………………………………8
EXTERIOR CLEANING…………………………………………………………………………………………………………….. 8
INTERIOR CLEANING………………………………………………………………………………………………………………8
WATER PAN AND CONDENSATION………………………………………………………………………………………………..8
MAINTENANCE……………………………………………………………………………………………………………………. 8
TROUBLESHOOTING………………………………………………………………………………………………………… 9
SPECIFICATIONS………………………………………………………………………………………………………………11
EDGESTAR LIMITED WARRANTY…………………………………………………………………………………………. 12

1
First Time Operating Instructions
Before use, make sure all packaging labels and materials are removed from the unit. Be sure to
keep track of all included parts and pieces before discarding packaging materials. It is advised
that you keep the original box and packaging materials in case you ever need to move or ship
the appliance in the future.
Let the unit stand for at least 24 hours before you use it. The instruction manual should be read
before use.
Introduction
Thank you for purchasing this EdgeStar wine cooler. We hope that this purchase will be the
beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide
the customer support and exemplary products necessary to nurture that relationship.
This manual contains important information regarding the proper installation, use, and
maintenance of your wine cooler. Following this manual will ensure that your product will work at
its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport your wine cooler.
For Your Records:
Please write down the model number and serial number below for future reference.
Both numbers are located on the ratings label on the back of your unit and are needed
to obtain warranty service. You may also want to staple your receipt to this manual as it
is the proof of your purchase, and is also needed for service under your warranty.
Model Number:
Serial Number:
Date of Purchase:
For a more efficient experience, please do the following before contacting customer service:
 If you received a damaged product, immediately contact the retailer or dealer that sold you
the product.
 Read and follow this instruction manual carefully to help you install, use, and maintain
your wine cooler.
 Read the troubleshooting section of this manual as it will help you diagnose and solve
common issues.
 Visit us on the web at http:/www.edgestar.com to register your product, download product
guides, and access additional troubleshooting resources and up-to-date information. You
can also find an interactive self-diagnostic tool at https://support.edgestar.com
 If you need warranty service, our friendly customer service representatives are available
via email at [email protected] or by telephone at 1 [phone].

2
Tip: Gather the model and serial number from the product label and write them down before
loading the wine cooler.
Parts Identification
Exterior View
Interior View (Without Door)
Note: The carbon filter
should be replaced
every 3-6 months
depending on the
unit’s exposure level
to odor. If the unit is
placed in the kitchen
regular replacement
every 3 months is
ideal.

3
Important: Do not remove any safety, warning, or product information labels from your wine
cooler.
Installing the Wine cooler
The wine cooler should be installed in accordance with local electrical code requirements. The
wine cooler should also be placed in a location that is strong enough to support its total weight,
keeping in mind that it will weigh substantially more when fully loaded than when empty.
Before you plug the wine cooler into a power supply, be sure to let it stand upright for at
least 24 hours to allow the temperature to acclimate.
Unpacking the Wine cooler
Carefully remove the packaging materials. Remove any shipping tape and glue from your wine
cooler before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage the surface of your
wine cooler.
Types of Installation
This wine cooler has been designed for free-standing installation only. There must be adequate
ventilation space around the top, back, and sides of the unit.
Free-standing Installation:
A free-standing installation will allow you to install the wine cooler in almost any place you
desire. You must follow the stated instructions for electrical requirements, installation
clearance, and leveling the wine cooler.
Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
wine refrigerator.
Warning: DO NOT install the wine cooler built-in or behind a closed cabinet door.

4
Important Notes:
 Choose a location that has an ambient temperature of 78° F. Operation outside this
temperature may result in lowered efficiency or cause other adverse effects.
 This unit MUST be installed indoors in an area protected from the elements, e.g. wind,
rain, water spray or drips.
 The wine cooler should not be located next to ovens, grills, or other high heat sources.
Installation Clearance Requirements
 To ensure proper ventilation, allow at least 5” of clearance at the back, 3” at the top, and
3” at the sides.
 The wine cooler should be installed on a firm and level surface that will be able to support
the entire weight of a fully loaded unit. It is important for the wine cooler to be level in
order to work properly. If needed, you can adjust the height of the wine cooler by rotating
the feet. See the “Leveling the Wine Cooler” section.
 A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.
Important Notes:
• Choose a location that has
ambient temperatures above
50°F and below 95°F.
Operation outside these
temperatures may result in
lowered efficiency or cause
other adverse effects.
• This unit MUST be installed
in an area protected from the
elements, e.g., wind, rain,
water spray or drips.
• The wine refrigerator should
not be located next to ovens,
grills or other high heat
sources.
• Do not kink or pinch the
power supply cord between
the wine refrigerator and wall
or cabinet.

5
ELECTRIC SHOCK HAZARD!
 Plug into a grounded 3-prong outlet.
 Never remove the grounding prong from the plug.
 Never use an adapter to bypass the grounding prong.
 DO NOT use an extension cord.
 Failure to follow these instructions can result in fire, electrical shock, or death.
Note: You must adjust the feet to level the wine cooler.
Electrical Requirements
Before you move your wine cooler into its final location, it is important to make sure you have
the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
The fuse (or circuit breaker) size should be 15 Amps.
Recommended Grounding Method
For your personal safety, this appliance must be grounded. It is equipped with a power
supply cord that has a 3-pronged grounding plug. To minimize possible shock hazard, the
cord must be plugged into a mating 3-pronged wall socket, and grounded in accordance
with the National Electrical Code and local codes and ordinances. If a mating wall socket
is not available, it is the personal responsibility of the customer to have a properly
grounded, 3-prong wall receptacle installed by a qualified electrician.
Leveling the Wine Cooler
It is important for the wine cooler to be leveled in order to work
properly. It can be raised or lowered by rotating the plastic sheaths
around each of the feet on the bottom of the machine. If you find that
the surface is not level, rotate the feet until the wine cooler becomes
level. You may need to make several adjustments to level it. We
recommend using a carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the wine
cooler is level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the
refrigerator.
Turn the leveling feet to the left to raise that side of the refrigerator.
Tip: Use a surge protector to protect your wine cooler from electrical surges.

6
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
wine cooler?
2. Have the installation instructions been followed, including connecting the machine to
electricity, and has proper grounding been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a site where the ambient temperature is around 78° F all year round?
5. Is there a clearance of at least 5” at the rear, 3” at the top, and 3” at the sides for proper
air circulation?
Adjusting the Temperature
Internal Control Box
You may adjust the temperature of the wine cooler using the temperature control knob
inside of the unit. Turn and adjust the knob until you reach your desired temperature. The
wine cooler has a temperature range of 52° F to 64° F. Whether your wine cooler can
reach the actual set temperature depends on the ambient environmental conditions.
Turn the temperature knob to your left to increase the temperature and to the right to
decrease the temperature.
Press the light switch to turn the inner light on or off.
Note:
 Allow at least 24 hours before storing your wines to allow the temperature to acclimate.
 Radio devices may interfere with the touch sensitive controls and cause the temperature
settings to change. Move radio devices away from the wine cooler.