EDI EDV500–E-4D-DAYS User manual

ELECTRONIC DISPLAYS INC.
135 S. CHURCH STREET
ADDISON, ILL. 60101
www.electronicdisplays.com
EDV500–E-4D-DAYS
Parts List:
 EDV500 Day Counter Qty: 1
 IR remote Qty :1

Infrared Remote (IR) Overview
Brightness Control
 Press and hold the Increment/Count Up button to increase brightness.
Stop at desired setting
 Press and hold the Decrement/Count Down button to decrease
brightness. Stop at desired setting
Note: Brightness can only be set when not in edit mode.

Display Setup
1. Press the EDIT button and input the days (DDDD) you would like to count
up or count down from. Use the Increment and Decrement buttons and
press the EDIT button when desired value set
DDDD
DDDD = Days saved on display
2. Input the current hours (HH) in a 24 hour format. Press EDIT and use the
Increment or Decrement buttons to set. Press the ENTER button to set.
1 - HH
HH = Hours saved on display
1. Input the current hours (MM) in a 2 digit format. Press EDIT and use the
Increment or Decrement buttons to set. Press the ENTER button to set.
2 - MM
MM = Minutes saved on display
3. Input the current Seconds (SS) in a 2 digit format. Press EDIT and use the
Increment or Decrement buttons to set. Press the ENTER button to set.
3 - SS
SS = Seconds saved on display
5. Set the display to count up or down.
 First, press the Up/Down Edit button. Wait for the digits to stop
flashing
 Select to count up or down:
i. Count up button (UP arrow) to count up
ii. Count down button (DOWN arrow) to count down.
 Display will flash and begin counting.
________________________________________________________
Please visit our website for more information:
www.electronicdisplays.com
Or Call: 1-800-367-6056
Or Our Support Website:
http://edisupport.helpserve.com/