EDIFIER W200T mini User manual

W200T mini
True Wireless Earbuds Headphones
Manual

EN
Power ON/OFF
Green LED lit for 1s
1. Power ON when taken out of case.
2. Press and hold the touch panel on either earbud for 3s. White and green
LED will blink rapidly.
3. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your
device setting to connect.
1st Pairing
1.
Power ON when taken out of case. White and green LED will blink rapidly.
2. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your
device setting to connect.
Note: For subsequent use, the earbuds will auto-connect to device used last
time.
Pairing
Indicator Indicator
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
3s
3s

1. Power on when taken out of the case.
2. Earbuds must disconnect to any devices.
3. Tap the touch panel 2 times until the green LED blink rapidly to enter left
& right earbuds connection.
4.
After the earbuds are connected, the green LED will blink 2 times every 5s.
5. Enter pairing mode.
1. Power ON when taken out of the case.
2. Earbuds must disconnect to any devices.
3.
Press and hold the touch panel on both earbuds respectively for 8s to reset.
Note: Left and right earbud must be done Reset separately.
Left & Right connection
Reset
8s
8s
Indicator Indicator
x2
x2

Note: Images are for illustrative purposes only and may differ from the actual
product.
Controls
Play/pause:
Previous track:
Voice assistant:
Accept a call:
End a call:
Reject a call:
Play/pause:
Next track:
Voice assistant:
Accept a call:
End a call:
Reject a call:
3s
3s
x2
x2
x3
x2
3s
3s
x2
x2
x3
x2
3-
Left Touch Panel Right Touch Panel

For more information, please visit our website:
www.edifier.com
@Edifierglobal @Edifier_Global @Edifier_Global
Model: EDF200061
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.