ENACFIRE F1 User manual

TRUE WIRELESS
STEREO EARPHONES
ENACFIRE F1 INSTRUCTION

01-16
32-48
English
Deutsch
17-31
日本語
49-65
66-82
Español
Français
Contents

Eartips x3
1
Earphones x1
USB Charging
Cable x1
Manual x1
Charging case x1
Warranty Card x1
Packing List

  Charging port
. USB Output
  Charging case LED light
  Multifunctional button
  Earphone LED light and Mic
  Acoustic hole
  L / R Logo
  Magnetic Charging Pin
  Speaker
5
7
9
6
Product Overview
2
3
2
8
4

Wearing
Step 1：Choose the suitable eartips
Step 2：
Wear it and adjust to a comfortable position
(Please distinguish between the left and right earphone)
3

Approach 1 - With Charging Case
Power On & Pairing
Power On: Take out the earphones from the charging case with Blue
light on
Pairing: Earphones will start paring automatically with Blue and White
light flash alternatively
Connection: Select 'ENACFIRE F1' from the device's Bluetooth list
Note: Left earphone is the master earphone
4

Set Bluetooth
Bluetooth
Device
ENACFIRE F1
Approach 2 - Earphones Standalone
Power On & Pairing
                                                  
               '       '         
     Earphones will start paring automatically with Blue and White light
flash alternatively
Connection: Select 'ENACFIRE F1' from the device's Bluetooth list
Note: Left earphone is the master earphone
5
RL
touch 2 sec

Reason 1: Device's Bluetooth Function
Turned Off
Disconnection
If the Bluetooth is turned o, earphones will be disconnected.
After 5 minutes of reconnection timeout, the earphones will
power o automatically.
Reason 2: Out of Connection Distance
If the connection distance between the device and the
earphones exceeds the eective range, the earphone will power
o automatically after 5 minutes of reconnection timeout.
6
5 minutes

Answer call/End call
Incoming call
Reject call
Touch for 2 sec
Tap once
L/R
L/R
0：35
Touch the Left or Right multifunctional button for 2 seconds
7
Tap the multifunctional button of either earphone once

Pause / Play
To launch your Device’s Voice Assistant, double-tap the Left
multifunctional button with the 'Beep' prompt sound.
Music
Double-tap the Right multifunctional button to pause/play music
in the music mode
(Some phones may require you to start a media player first)
Voice Assistant
8
RL

R
L
Previous song
Touch the Right multifunctional button for 2 seconds
Touch the Left multifunctional button for 2 seconds
Note: This function is not supported when earphone is used in single
Next song
9

Note: Make sure earphones are turned o before using Method 2
Single Mode
10
Right Earphone
Left Earphone
(Master Earphone)
Single
Mode
Method 1
Method 2
1. Put back Left earphone
only when both earphones
are connected
2. Right earphone will start
paring with blue and
white lights flash
alternately
3. Select ‘ENACFIRE F1 - R’
from the Bluetooth list.
1. Touch the Right
multifunctional button for
4 seconds with Blue and
White light flash
alternately
2. Select and click
‘ENACFIRE F1-R’ from the
Bluetooth list.
Touch the Left
multifunctional button for 2
seconds with Blue and
White light flashes
alternately
Simply take Left earphone
out from the charging case

10
Mode 1
Earphones Standalone
Power O
When the earphones are ON, touch either one multifunctional button for
6 seconds, both earphones will power o.
Put the earphones back to the charging case, they will power o
automatically.
Note: Put only the Left earphone into the charging case, the Right
earphone will disconnected and start pairing
Put only the Right earphone into the charging case, the Left earphone will
stay connected
1. Put back Left earphone
only when both earphones
are connected
2. Right earphone will start
paring with blue and
white lights flash
alternately
3. Select ‘ENACFIRE F1 - R’
from the Bluetooth list.
1. Touch the Right
multifunctional button for
4 seconds with Blue and
White light flash
alternately
2. Select and click
‘ENACFIRE F1-R’ from the
Bluetooth list.
11 L/R
Touch 6 sec
Mode 2

Earphones charging Status
Charging
Earphones LED light on: Charging
Earphones LED light o: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones
12
Charging case charging Status
Lights on charging case stand for the remaining battery capacity
Note: It takes about 3 hours to fully charge the charging case.
1/3 Battery Left
2/3 Battery Left
Fully charged

12 13
Safety Instruction
Using earphones at high to moderate volumes for extended periods of
time will result in permanent hearing damage. It is advised that you keep
volume levels moderate to low at all times for your safety.
Do not use while driving, cycling, operating machinery or performing
other activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not
work properly in the bad weather condition, and may increase the risk of
being hit by lightning.
Earphones may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones . If the
earphones come in contact with liquids, quickly wipe away. If submersed
in the water, do not turn the earphones on until it is completely dried.
Tips: Warranty void if the earphones submersion in the water
Keep the earphones and the packaging out of reach of children.

14
Q&A
Q: Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between the earphones and
your device. Please make sure there is no Microwave oven / Wifi
transmitter around you, which are more likely to produce electromagnetic
interference and result in signal interruption.
Note: Please keep your phone and the master earphone (L) as close as
possible, ensure more stable Bluetooth connection.
Q: What should i do if there are connectivity and pairing issues?
A: Please make sure both earphones have been turned o and try to
forget all the devices’ name in your mobile phone’s Bluetooth list, then
reconnect the earphones to the mobile phone.
Q: How to contact ENACFIRE Customer Service Team?
A: If you have any issue with the product, please contact us via
support@enacfireglobal.com (US/ CA) / moongu@enacfireglobal.com
(UK). We will reply to you within 24 hours and 100% solve your issue.

14 15
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
16

16
完全ワイヤレスイヤホン
ENACFIREF1取扱説明書
17