EDIFIER W180T User manual

True Wireless In-Ear Headphones
W180T
Manual

Pairing
1. Taken out of the case.
2. Press and hold the touch panel on either earbud for 1-3s. Red and Blue LED will blink rapidly.
3. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.
Pairing for the first time
1. Taken out of the case. Red and Blue LED will blink rapidly.
2. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.
Note:
1. For subsequent use, the earbuds will auto-connect to device used last time.
2. After you complete the Bluetooth pairing between the one earbud and the mobile phone, you can also
repeat the above steps to pair the other earbud with the mobile phone to realize the operation of any
single earbud.
1-3s 1-3s
Indicator
Indicator
8s 8s
Indicator
Indicator
EN
Power ON/OFF
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
Reset
1. Taken out of the case.
2. The earbuds are not connected and not connected with any Bluetooth devices.
3. Respectively press and hold the touch panel on earbuds for 8s, Blue LED blinks 6 times rapidly and turn
off, then the pairing record will be cleared.
Blue LED lit for 1s

x2 x2
Indicator
Indicator
Charge
Left & Right connection
1. Taken out of the case.
2. The earbuds are not connected and not connected with any Bluetooth devices.
3. Quickly tap the touch panel on both earbuds 2 times and hold to wait until the blue LEDs blink rapidly,
then left & right will start connecting.Blue LED will blink twice in 5s after connected.
Earbuds
1. When hearing low battery prompt tone, please place the earbuds in the
case for charging.
2. Red LED is steady lit when charging and off when fully charged.
Charging case
1. Please connect the case to power source with the included Type-C
charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.
Input: 5V 200mA(Earbuds)
5V 1A(Charging case)
Red LED

Right Touch Panel
Left Touch Panel
Note:
1. Please do not charge the product when there is sweat or other liquids inside the charging port, which
may damage the product.
2. Images are for illustrative purposes only and may differ from the actual product.
Controls
x1x1
x3 x3
x2 x2
2s 2s
x1x1
x1x1
2s2s

Model: EDF2000725
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.
For more information, please visit our website:
www.edifier.com
@Edifierglobal @Edifier_Global @Edifier_Global