EDIFIER M203BT User manual

Multimedia Speakers
M203BT
User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | Manuale dell’utente
Manual do utilizador | ユーザーズガイド | Руководство пользователя

Box contents
User manualWired controller
Note: Images are for illustrative purposes only and may differ from the actual product.
3
English

Illustration
1. Bass adjustment
2. AUX input
3. Left and right satellite speakers output
4. Power cable
5. Power switch
4
English
6. Headphone jack
7. Input mode selector
Press: input mode selector (Bluetooth/AUX mode)
Press and hold: disconnect Bluetooth (Bluetooth mode)
8. Indicator
AUX mode: green light is lit
Bluetooth mode (unconnected): blue light flashes
Bluetooth mode (connected): blue light is steady lit
9. Volume control
①
②
③
④
⑤
⑥
⑦
⑧
⑨

Connection
5
English
Right satellite speaker (R) Left satellite speaker (L)

Bluetooth connection
6
English
• After powered on, press the "INPUT" button to switch to Bluetooth mode, the blue light will flash;
• Set your mobile phone to search for and connect to "EDIFIER M203BT";
• To disconnect Bluetooth, please press and hold "INPUT" button.
EDIFIER M203BT
Press to switch to Bluetooth mode

Specifications
7
English
Total watts (peak): 68W
Total watts (RMS): 34W(R/L: 8W+8W SW: 18W)
Frequency response: R/L: 210Hz-20KHz SW: 63Hz-206Hz
Audio inputs: AUX, Bluetooth
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power output: ≤20 dBm (EIRP)
There is no restriction of use.

Troubleshooting
8
English
No sound
• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
Disconnect from any Bluetooth device by pressing and holding the "INPUT" button, then try again.
• Effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.
• Try another Bluetooth device for connection.
The M203BT does not turn on
• Check if main power is connected, or if the walloutlet is switched on.
Noise coming from speakers
• EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio
cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with
the speakers.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty
Terms.
USA and Canada: [email protected]
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.

9
Français