Edimax EW-7711UAn User manual

1
Multi-Languages QIG in Driver CD
================================================
Český: Českého průvodce rychlou instalací naleznete na
přiloženém CD s ovladači
Deutsch: Auf der beiliegend Treiber CD finden Sie deutsche
Anleitung zur Schnellinstallation.
Español: Incluido en el CD el QIG en Español
Français: Veuillez trouver l’français QIG ci-joint dans le CD
Italiano: Incluso nel CD il QIG in Italiano
Magyar: A magyar telepítési útmutató megtalálható a mellékelt
CD-n
Nederlands: De nederlandse QIG treft u aan op de bijgesloten
CD
Polski: Skrócona instrukcja instalacji w języku polskim znajduje
sięna załączonej płycie CD
Português: Incluído no CD o QIG em Portugues
Русский: Найдите QIG на pусскoмязыке на приложеном CD
Romana: Cd-ul cuprinde Ghid de instalare rapida in limba
romana
Slovensky: Anglického sprievodcu rýchlou inštaláciou nájdete na
priloženom CD s ovládačmi.
Türkçe: Ürün ile beraber gelen CD içinde Türkçe HızlıKurulum
Kılavuzu'nu bulabilirsiniz
简体中文: 产品包装 CD 光盘中含有简体中文版快速安装手冊
繁體中文: 產品包裝隨附 CD 中含有繁體中文版之快速安裝指南

2
Content
1. Product Information ..............................................................4
2. Package Contents .................................................................4
3. Network Card Installation .....................................................5
3.1 Hardware Installation ....................................................5
3.2 Software Installation .....................................................6
4. Connect to Wireless Access Point ....................................11

3
Copyright©by Edimax Technology Co, LTD. all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of this
company.
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any
software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Further, this company reserves
the right to revise this publication and to make changes from time to time in
the contents hereof without obligation to notify any person of such revision
or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about
this product, please refer to the User's Manual on the CD-ROM. The
software and specifications are subject to change without notice. Please
visit our web site www.edimax.com for the update. All right reserved
including all brand and product names mentioned in this manual are
trademarks and/or registered trademarks of their respective holders.

4
1. Product Information
Main Features
Complies with wireless 802.11b/g standards
Compatible with wireless 802.11n standard with data rate up to
150Mbps
Increases Wireless coverage 3 times further *
Includes multi-language EZmax setup wizard
Supports USB 2.0/1.1 interface
Supports WPS configuration function
Supports WMM, WMM-PS (IEEE 802.11e QoS standard)
Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x),WPA2 (AES
with IEEE 802.1x) for high security level
Supports operating system: Windows 2000/XP/Vista, MAC 10.4.x and
above & Linux
* Maximum performance may vary depending on network conditions and
environmental factors.
2. Package Contents
Before you starting to use this wireless network card, please check if
there's anything missing in the package, and contact your dealer of
purchase to claim for missing items:
Wireless USB Adapter x1
USB cable x1
Antenna x1 (For EW-7711USn only)
Quick Installation Guide x1
CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide &
User Manual) x1

5
3. Network Card Installation
Please follow the following instructions to install your new USB wireless
network card:
3.1 Hardware Installation
※Built-in Hardware WPS Button (For EW-7711UAn / EW-7711UMn , EW-7711UTn)
1. Insert the USB wireless network card into an empty USB 2.0 port of your
computer when computer is switched on.
WPS
LED

6
Never use force to insert the card, if you feel it’s stuck, flip the
card over and try again.
2. The following message will appear on your computer, click ‘Cancel’.
Software Installation
This wizard can be run in Windows 2000/XP/Vista. The following
procedures are operated in Windows XP.
You can install the Wireless Adapter by EZMAX Setup Wizard in the
CD-ROM including in the package. The wizard is an easy and quick
configuration tool for internet connection with series process. When you
start EZMAX Setup Wizard, you will get the following welcome screen.
Please choose the language to start the configuration. The wizard will guide
you to finish your network connection. We will not provide any instruction
for the EZMAX Setup Wizard here.

7
If you lose the CD ROM or you prefer the traditional setup procedure,
please follow the instruction as following step in this quick
installation guide.

8
3.2.1 Please execute ‘Edimax_xxxx_Setup.exe’ program to install your
wireless adapter. Please read the end user license agreement and
click ‘I accept the terms of the license agreement’ and ‘Next’ to accept
license agreement.
3.2.2 It is recommend installing driver and utility if the network card is
installing the first time. If you want to update the driver only,
choose ’Install driver only’. Click ‘Next’ to continue.

9
3.2.3 You can choose the configuration tool used to configure the wireless
network card here. It’s recommended to select ‘Edimax Configuration
Tool’, which provides fully access to all function of this wireless
network card. If you prefer to use the wireless configuration tool
provided by Windows XP or Vista, please select ‘Microsoft Zero
Configuration Tool’, and then click ‘Next’.
3.2.4 When you see this message, please click ‘Install’ to begin the
installation.

10
3.2.5 When you see this message, please click ‘Finish’ to complete the
driver installation process.

11
4. Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point
4.1 After installation is complete, wireless configuration utility will be
shown as an icon at the lower-right corner of your windows desktop.
Please click the icon by right mouse key, and select ‘Launch Config
Utilities’
4.2 Configuration utility will scan for wireless access points automatically,
and all found access points will be displayed. Please select an access
point you wish to connect, and click ‘Connect’.
If the wireless access point you want to connect does not show here,
please click ‘Rescan’

12
4.3 If the wireless access point uses encryption, you have to input WEP
passphrase or WPA preshared key. Please ask the owner of the
wireless access point you want to connect, and input the correct
passphrase / preshared key here, then click ‘OK’. If the value you
inputted here is wrong, you will not be able to connect to wireless
access point.
Authentication type is selected automatically, please don’t
change it.
4.4 If the wireless access point is successfully connected, you’ll see a
symbol appears in front of the name of wireless device.
For advanced settings and other features of this wireless network card,
please refer to user manual enclosed in supplied CD-ROM.

13
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance could void
the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure
Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)
during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

14
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment
and telecommunication terminal Equipment and the mutual recognition of their
conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of
April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and
use it. However, special attention must be paid to the dangers of electric shock and
static electricity when working with electrical equipment. All guidelines of this and of the
computer manufacture must therefore be allowed at all times to ensure the safe use of
the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria,
Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania,
Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries not intended for use
None
Please check the declaration of conformity on www.edimax.com

15