Edimax BR-6473AX User manual

BR-6473AX
User Manual
12-2019 / v1.0
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Edimax
BR-6473AX o cerca il tuo prodotto tra le migliori offerte di Router

Contents
I. Product Information.................................................1
II. Package Contents ....................................................2
II-1. System Requirements................................................................. 2
II-2. Hardware Overview ................................................................... 3
II-3. LED Status.................................................................................. 5
III.Hardware Installation ..............................................6
III-1. AP & Router Mode ..................................................................... 8
IV. Quick Setup.............................................................9
V. Wi-Fi Settings.........................................................16
V-1. Main Wi-Fi ................................................................................16
V-2. Guest Wi-Fi ...............................................................................18
V-3. WPS ..........................................................................................19
VI. Administration ......................................................21
VI-1. System Information...................................................................22
VI-2. Password ..................................................................................23
VI-3. Firmware Upgrade ....................................................................24
VI-4. Backup and Restore ..................................................................25
VI-5. System Log................................................................................28
VI-6. Statistic.....................................................................................30
VI-7. Time Zone .................................................................................31
VII. Security..........................................................31
VII-1. Access Control...........................................................................32
VII-2. Port Forwarding ........................................................................33
VII-3. DMZ..........................................................................................34

1
I. Product Information
The Edimax BR-6473AX smart Wi-Fi router with Intel GRX350 (800MHz
dual-core) and fast dual band speeds up to 574Mbps (2.4 GHz) and 2402Mbps
(5 GHz) is well suited for your home.
The BR-6473AX with beamforming + 4X internal antennas delivers fast and
reliable long range Wi-Fi coverage to every corner of your home.
With the simple and intuitive web UI interface, you can easily set up the
router and remotely control through the browser or phone.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter the model no.
“BR-6473AX”into the search box to search for your product.)

2
II.Package Contents
Before start using this product, please check if there is anything missing in the
package, and contact your dealer to claim the missing item(s):
II-1. System Requirements
-Existing cable/DSL modem & router
-Computer with web browser for AP configuration
BR-6473AX
Power Adapter (12V)
Ethernet Cable
Quick Installation Guide

3
II-2. Hardware Overview
1
1
2
3
4
6
5
7
9
8
10

4
No.
Description
1
LED (2.4G, 5G, WPS, LAN1, LAN2, LAN3, LAN4, WAN, POWER)
2
Selector Switch (Router and AP mode)
3
WPS Button
4
RESET Button
5
LAN4 Port
6
LAN3 Port
7
LAN2 Port
8
LAN1 Port
9
WAN Port
10
DC Power Jack

5
II-3. LED Status
Function
Color
Status
Description
2.4GHz
& 5GHz
Blue
On
Internet connection is ready.
Off
Wi-Fi not active.
Flashing
Activity. Sending or receiving data.
WPS
BLUE
Blinking
WPS connection established.
(WPS LED blinks for 2 seconds to indicate a
successful connection)
LAN
Blue
On
LAN port is connected.
Off
LAN port is not connected.
WAN
Blue
On
WAN port is connected.
Off
WAN port is not connected, or no Internet.
Power
Red
Blinking
Upgrading firmware or reset.
Green
on
Router mode. (Power on)
Blue
on
AP mode. (Power on)

6
III.Hardware Installation
This section will guide you through the steps to set up the BR-6473AX.
1. Plug the included AC adapter into the router’s power jack and the other
end into an electrical socket.
Note: Ensure the “POWER”LED lights on GREEN (Router Mode). If not,
the device is not properly connected.

7
2. Connect an Ethernet cable to the "LAN" port on your XDSL/Cable modem.
And connect your modem to the router of the “WAN”port with an Ethernet
cable.
NOTE: Ensure the “WAN”LED lights on BLUE.

8
III-1. AP & Router Mode
You can change the operation mode via the selector switch behind the router.
Move the selector switch left or right to change the operation mode (AP,
router mode).
NOTE: Please unplug the AC adapter when changing the operation mode.

9
IV.Quick Setup
This quick installation section will help you setup your router in its default
router mode and configure its basic settings.
Please follow the steps below:
1. Please find the default User Name “admin” and unique 8 digits default
Password “XXXXXXXX”of your router on the sticker.
NOTE: If you are using iOS 11 or later version, you can easily connect your
smart phone to the router using the QR code on the sticker.

10
2. Open a web browser, and you will be prompted for a username and
password. Enter the Username and the password. Click the “Sign in”button.
3. Click the “Auto Detect”button to run the Easy Setup.
NOTE: In the Easy Setup, you can configure the router to access the Internet
with different modes, such as DHCP, Static IP and PPPoE.

11
DHCP:
If you use DHCP, please wait while the router setting is completed.

12
Click the “Setup Complete”button to complete the setup.
Static IP:
Enter IP address, default gateway, subnet mask and DNS1/DNS2.
Click the “next”button to proceed to the next step.

13
IP Address
Displays the IP address of this router.
Default
Gateway
Displays the IP address of the default gateway.
Subnet Mask
Specify a subnet mask. The default value is 255.255.255.0.
DNS1
For static IP users, the default value is blank.
DNS2
For static IP users, the default value is blank.
Click the “Setup Complete”button to complete the setup.

14
PPPoE:
Enter the Username / Password and click the “next”button.

15
Click the “Setup Complete”button to complete the setup.
If settings failed or Ethernet cable is not connected properly, you will be
prompted to check the following settings below,

16
V. Wi-Fi Settings
In this page allows you to configure the Wi-Fi, guest Wi-Fi and WPS settings
that suit your needs.
V-1. Main Wi-Fi
You can change the basic settings for 2.4GHz and 5GHz.

17
Wireless 2.4GHZ (5GHz) / SSID
2.4GHz/ 5GHz
Enable/ Disable
SSID
Displays the SSID name(s) for the specified frequency.
Authentication
Methods
Displays the authentication method for the specified SSID.
Encryption Key
Displays the encryption type for the specified SSID.
Channel
Set the channel width:
2.4 GHz
-20MHz (lower performance but less interference).
-40MHz (higher performance but potentially higher
interference)
-Auto (automatically select based on interference level).
5GHz
-20MHz (lower performance but less interference).
-40MHz
-80MHz
-160MHz (higher performance but potentially higher
interference)
-Auto (automatically select based on interference level).
Channel
2.4 GHz:
Select a wireless channel from 1 –11 or auto.
5GHz:
Select a wireless channel from 36 –140 or auto.

18
V-2. Guest Wi-Fi
You can setup an additional “Guest” Wi-Fi network so guest users can enjoy
Wi-Fi connectivity without accessing your primary networks.
Guest Wi-Fi
Guest Wi-Fi
Enable/ Disable
SSID
Displays the SSID name(s) for the guest Wi-Fi.
Authentication
Methods
Displays the authentication method for the specified SSID.
Encryption Key
Displays the encryption type for the guest Wi-Fi.