Edimax SP-1101W User manual

I
SP-1101W
User Manual
11-2013 / v1.0

Copyright ＠Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability, or fitness for any particular purpose. Any software described
in this manual is sold or licensed as is. Should the programs prove defective following
their purchase, the buyer (and not this company, its distributor, or its dealer) assumes
the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves
the right to revise this publication and to make changes from time to time in the contents
hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different
from those shown in this QIG. For more information about this product, please refer to
the user manual on the CD-ROM. The software and specifications are subject to change
without notice. Please visit our website www.edimax.com for updates. All brand and
product names mentioned in this manual are trademarks and/or registered trademarks
of their respective holders.
Edimax Technology Co., Ltd.
Add: No. 3, Wu-Chuan 3rd Rd., Wu-Ku Industrial Park, New Taipei City, Taiwan
Tel: [phone]
Email: [e-mail]
Notice According to GNU General Public License Version 2
Certain Edimax products include software code developed by third parties,
software code is subject to the GNU General Public License ("GPL") or GNU
Lesser General Public License ("LGPL"). Please see the GNU (www.gnu.org)
and LPGL(www.gnu.org) Websites to view the terms of each license.
The GPL Code and LGPL Code used in Edimax products are distributed without
any warranty and are subject to the copyrights of their authors. For details,
see the GPL Code and LGPL Code licenses. You can download the firmware-
files at http://www.edimax.com under "Download" page.

II
I. Product Information.............................................................................. 1
I-1. Package Contents ...............................................................................1
I-2. Front Panel ........................................................................................1
I-3. LED Status..........................................................................................2
I-4. Switch Status Button .........................................................................2
I-5. Product Label.....................................................................................3
I-6. Reset..................................................................................................3
II. Hardware Installation............................................................................ 4
III. Smart Plug Setup................................................................................... 5
III-1 Download EdiPlug App .......................................................................5
III-2. Install a Smart Plug.............................................................................6
III-3 Change Smart Plug Name & Password .............................................10
III-4 Add an Existing Smart Plug to the Main Screen ................................12
III-5 Set the Schedule..............................................................................14
III-6. Notification.......................................................................................19
III-7 Delete Smart Plug from Main List.....................................................24
III-8 Reset to Default................................................................................25
III-9 Upgrade Firmware............................................................................27

1
I. Product Information
I-1. Package Contents
I-2. Front Panel
Network LED
Power LED
Switch Status Button & LED
Reset Button
Smart Plug Switch
Quick Installation Guide
CD with User Manual

2
I-3. LED Status
After setup, the network LED must display on and green in
order for the EdiPlug app to function remotely i.e. from a
different Internet connection to your smart plug.
I-4. Switch Status Button
The switch status button, located on the front of your smart plug (see I-2.),
switches on/off your smart plug’s output power socket. You can switch any
device connected to your smart plug on or off with this button. The button
will light up green to indicate on (see I-3).
LED
Color
Status
Description
Switch
Status
Green
On
Smart plug output power socket is on.
Off
Smart plug output power socket is off.
Power
Green
On
Smart plug is powered on.
Off
Smart plug is off.
Network
Red
Quick Flashing
Smart plug is starting up or restarting.
Slow Flashing (1
x per second)
Smart plug is in installation mode and
ready for setup.
Green
On
Smart plug is connected to wireless
network and cloud.
Slow Flashing (1
x per second)
Smart plug is connected to wireless
network but not cloud.
Off
No network connection.

3
I-5. Product Label
The product label, which is located on the back of the smart plug switch,
displays the input/output power and the default password of your smart plug.
The password should be changed when you have finished the installation
process for security purposes. The password is required to access the smart
plug switch remotely.
I-6. Reset
If you experience problems with your smart plug, you can reset the plug back
to its factory default settings. This resets all settings, including the smart
plug’s password, back to default.
1. Press and hold the reset button found on
the front of the plug for at least 10 seconds
2. Release the button when the network LED
is flashing quickly red.
3. Wait for the smart plug to restart. The
smart plug is ready when the network LED is
flashing slowly red to indicate installation
mode.

4
II. Hardware Installation
Follow the instructions below to ensure your smart plug is properly connected
and ready for setup.
If you have multiple smart plugs to set up, please only plug
in and set up one smart plug at a time.
1. Plug the smart plug into a power socket.
2. Wait a few moments for the smart plug to start up. The smart plug is ready
for setup when the network LED is flashing slowly red to indicate
installation mode.
If your smart plug’s network LED does not indicate
installation mode, try resetting the smart plug (see I-6).
3. When you see the smart plug’s network LED indicate installation mode,
please continue to III. Smart Plug Setup to set up your smart plug using
the free EdiPlug smartphone app.

5
III. Smart Plug Setup
III-1 Download EdiPlug App
To set up your smart plug with the free EdiPlug smartphone app, please
download the EdiPlug app and then follow the setup instructions for iOS or
Android. After setup, you can use the EdiPlug app to switch your smart plug
switch on/off remotely from any smartphone with an Internet connection, as
well as set up automated schedule and email notifications.
1. Search the Apple App Store or Google Play for “EdiPlug”.
2. Download and install the app.
3. Follow the appropriate instructions below for iOS or Android.

6
III-2. Install a Smart Plug
iOS
Follow the instructions below to add a new smart plug to the EdiPlug app on
iOS:
You must be within Wi-Fi range of the smart plug. If you
have multiple smart plugs, please only plug in and set up
one plug at a time.
1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as
shown below:
2. Open the EdiPlug app and select your Wi-Fi network from the list, as
shown below:

7
3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that
setup is complete!
4. Your smart plug will now be displayed on the EdiPlug main screen. Slide
the switch to switch the your smart plug (and any electrical device you plug
into it) on or off.
5. The smart plug’s network LED should display on and green to indicate a
successful network and cloud connection. You can use the EdiPlug app to
control your smart plug remotely from any Internet connection.

8
Android
Follow the instructions below to add a new smart plug to the EdiPlug app on
Android:
You must be within Wi-Fi range of the smart plug. If you
have multiple smart plugs, please only plug in and set up
one plug at a time.
1. Open the EdiPlug app and click the “+” icon in the top-right corner of the
screen.
2. Tap “Install a New Plug” and select your Wi-Fi network from the list, as
shown below.

9
3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that
setup is complete!
4. Your smart plug will now be displayed on the EdiPlug main screen. Slide
the switch to switch your smart plug (and any electrical device you plug
into it) on or off.
5. The smart plug’s network LED should display on and green to indicate a
successful network and cloud connection. You can use the EdiPlug app to
control your smart plug remotely from any Internet connection.

10
III-3 Change Smart Plug Name & Password
iOS
1. Select “Edit” from the EdiPlug main screen and then select the smart plug
which you wish to edit from the list.
2. Enter a new name and password for your smart plug and tap “Back” to go
back to the main screen. Your smart plug will now be displayed under its
new name.

11
Android
1. Select “Edit” from the EdiPlug main screen and then select the smart plug
which you wish to edit from the list.
2. Enter a new name and password for your smart plug and tap “Back” to go
back to the main screen. Your smart plug will now be displayed under its
new name.

12
III-4 Add an Existing Smart Plug to the Main Screen
iOS
1. From the EdiPlug main screen, click the “+” icon in the top-right corner and
select a plug from the list.
2. Enter your smart plug password and tap “OK”. Click “Back” icon on the
next screen to finish.

13
Android
1. From the EdiPlug main screen, click the “+” icon in the top-right corner and
select a plug from the list.
2. Enter your smart plug password and tap “OK”. Click “Back” on the next
screen to finish.

14
III-5 Set the Schedule
iOS
1. Select “Edit” from the EdiPlug main screen and then choose the device
that you wish to edit. Press “>” to enter the detail settings.
2. Select “Schedule” and then able or disable the control functions by sliding
the button to blue or white. Press “>”on the right of the screen if you want
to edit the schedule for that day.
z
z

15
3. On the edit schedule page, areas in gray indicate the switch is “off”, areas
in yellow indicate the switch is “on”. Slide arrows right on the time bar to
select switch “on” period and left to select switch “off” period. Touch the
yellow or gray area to adjust functions at that time. Press “Done” to save
settings and go back to previous page.
4. On the editing detail period page, areas in gray indicate the switch is “off”,
areas in yellow indicate the switch is “on”. Slide arrows right to switch “on”
and left to switch “off”. Swipe where the red arrows are below to go to
next or previous hour period. Press “Done” to save settings and go back to
previous page.

16
5. Press the time bar, as shown in the left picture, to show the detail
schedule settings which have been set as shown in the right picture.
Android
1. Select “Edit” from the EdiPlug main screen and then choose the device
that you wish to edit. Press “>” to enter the detail settings.

17
2. Select “Schedule” and then able or disable the control functions by sliding
the button to blue or white. Press “>”on the right of the screen if you want
to edit the schedule for that day.
On the edit schedule page, areas in gray indicate the switch is “off”,
areas in yellow indicate the switch is “on”. Slide arrows right on the
time bar to switch “on” and left to switch “off”. Touch the yellow or
gray area to adjust functions at that time. Press “Done” to save settings
and go back to previous page.