Edimax ES-5824PHG User manual

The Edimax ES-5824PHG is a 24-port gigabit rack-mount switch with 24 PSE/PoE ports. It is designed for sturdy network
connections in medium to large network environments. Its standard 19-inch rack-mount brackets allow for perfect integration
with the most widely used mounting systems on the market. The Edimax ES-5824PHG is truly a superb choice to boost your
network environment’s performance and efficiency.
Complies with the IEEE 802.3at Power over Ethernet (PoE+) Standard
The ES-5824PHG features 24 IEEE 802.3at Power over Ethernet (PoE+) ports, which supplies up to 30 watts of electricity per
port. It can convert standard 90-260V AC electricity into low-voltage DC electricity to power IEEE 802.3at/af compliant
network accessories via existing LAN cables. With PoE detection capability, the ES-5824PHG is able to verify whether the
connected device is IEEE 802.3af compliant. In the event that a PoE device is not detected, only network data will be
transmitted through the LAN cable. The ES-5824PHG can be used with different PoE products, such as access points, network
cameras, or VoIP devices. It is the best solution for network environments where power outlets are difficult to access.
Compliant with Cat 5 Ethernet Cables for Higher Cost Efficiency
The ES-5824PHG can transmit both power and network data via Cat 5 Ethernet cables. With the ES-5824PHG, no special
networking cables or power adapters are necessary for PoE applications. The ES-5824PHG reduces the difficulty, time, and
cost of establishing a sturdy network environment.
Features Power Budget UI for Easy Management of PoE Devices
The ES-5824PHG features an innovative power budget UI that allows IT managers to monitor the power consumption on each
PoE port as well as the total power consumption of those devices connected to the ES-5824PHG. IT managers can easily
monitor the whole PoE network and assess the total power usage before adding new PoE devices to the PoE network
architecture. The power budget UI also features a remote on/off function for each PoE port. When one PoE device hangs, the
IT manager does not need to unplug and plug the network line manually. Simply by clicking the power on/off button, the IT
manager can reset the PoE device remotely in seconds.
Smart Tools for Improved Network Efficiency
The ES-5824PHG features smart QoS/CoS and network monitoring tools that allow for improved network efficiency. Its
security and management features include bandwidth control and VLAN (IEEE 802.1Q VLAN tagging and port-based VLAN).
Through its web-based interface, an administrator can set up VLANs to segregate traffic, prioritize mission-critical data with
QoS, and configure link aggregation settings to create fat traffic pipelines. In addition, the ES-5824PHG also supports Rapid
Spanning Tree to detect and break unintentional cabling loops within the network. All of these features offer extra protection
on the network edge. Best of all, the password-protected configuration interface can be accessed remotely.
Gigabit 24-Port PoE+ Web Smart Switch
ES-5824PHG

Specification
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.1x Port-based Network Access Control
IEEE 802.1Q VLAN
IEEE 802.3ad Link Aggregation
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1p Class of Service, Priority Protocols
Features
RJ-45 Gigabit Ports: 24-port with PoE
Combo SFP Open Slots: 4
MAC Address: 8K
Buffer Memory: 500 KB
Jumbo Frames: 9.6 KB
Transmission Method: Store and Forward
Smart Features
VLAN: 32
Tagged VLAN: 32
VLAN ID: 1~ 4094
Trunk Groups: 8
Quality of Service: up to 4 queues
IGMP Snooping
LACP, RSTP
MAC Filtering
Rate Limiting (Ingress rate and Egress rate)
802.1x Port-based Network Access Control
Management: Port Mirroring, Password-protected Access, Port Settings,
Web-base Management, Graphic User Interface
Filtering/Forwarding Rates
1000Mbps port –1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
Led Indicators
Per Port: Link/Act,
Per Unit: Power
Power Requirement
100~240V/AC, 50~60Hz
Power Consumption
195 watts (Max)
Dimensions
440 ×330 ×44mm(L x W x H)
Weight
4.6 Kg
Operating Temperature
0 to 40℃
Storage Temperature
-20 to 90℃
Humidity
10 to 90% RH (non-condensing)
Certifications
FCC Class A, CE