edishine HOPL01A4 User manual

Outdoor Post light
SKU: HOPL01A4
[Instruction Manual]
Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Please attach your Order ID so that
we can serve you better.

Risk of fire. Min 75℃supply conductors. Consult a qualified electrician to
ensure correct installation.Before installation, please turn off the main power
of the circuit breaker to prevent possible electric shock.
Warning:
1.Packling list
2.Product specifications
01
- Input Voltage: 120VAC 60HZ
- Maxload Power: Incandescent Bulb 60W
- Socket Type:Requires 1xmedium screw base E26 bulb
60W max(not include)
- Materal: Die-casting Aluminum and Water Ripple Glass
- Certification: ETL
- Dimensions: 18.5”(H) x6.3”(W) x 6.3’’(D)
IDX ITEM NAME SPEC. NOTEQUANTITY
1
2
3
4
5
Post light
Pier mount base
Wire connectors
Mounting screw
Instruction manual
18.5”x6.3”x6.3”
5.7”x5.7”
P3
M5X50mm
A5 PAPER
1 pc Bulb Not
Included
1 pc
3 pcs
4 pcs
1 pc
6Expansion bolt Φ8x38mm 4 pcs

3.Installation Instructions
STEP 01: POWER OFF
FIG.1 WALL SWITCH FIG.2 BREAKER PANEL
FIG.3 FUSE BOX
02
FIG.1. Turn the wall switch to the “OFF” position.
Depending on which type of fuse box in your home:
FIG.2. Either turn the main (Master) switch to the "OFF" position to cut off
the power supply of the entire home, or turn off the individual switch that
supplies power to where the fixture will be installed.
OR
FIG.3. Either turn the main (Master) switch to the "OFF" position to cut off
the power supply of the entire home, or unscrew the fuse that supplies
power to where the fixture will be installed.

STEP 02: CLEAN THE LIGHT
Cleaning: Cleaning the glass and photocell sensor surface of the post light,
with a soft and damp cloth.Dust will affect the sensitivity of photocell and
brightness of the post light.
Please Note:
(1)The lights will turn on immediately when being installed first time.
(2)The photocell sensor detecting time is 30-60S.
(3)Installation Position Requirements:
1- Please install it in a position facing the sun, avoiding shades, eaves
or other dark positions;
2- Also please do not install it around other light source position, which
might cause light interference.
The lamp structure is described as following picture:
STEP 05: POWER ON
Turn on the main (Master) switch to get the power back, the Light will turn
on automatically at dusk and off at dawn.
STEP 04: FIX THE LIGHT
You can fix the lamp in one of two ways:
Method 01: Install it on a 3-inch diameter post light pole(not include).
Method 02: Installed it on the door pier or other planes(bigger than 5.7”×
5.7”) through the pier mount base(in pack list).
STEP 03: CONNECT THE WIRE
Connect black live wire, white neutral wire and ground wire with wire
connectors,be sure that the wires are connected together sturdily.
03

TOP COVER
BULB
(NOT INCLUDED)
MOUNTING
SCREWS
BLACK LIVE WIRE
GROUND WIRE
EXPANSION BOLT
GLASS SHADES
PHOTOCELL SENSOR
PIER MOUNT BASE
WHITE NEUTRAL WIRE
04

(1)Does this light include dusk to down sensor?
Yes, this outdoor post light can automatically turn on at dusk and off at
dawn by detecting the brightness of surroundings.
(2)Are there any matching wall lamps on sale?
Yes, we have matching wall lampson sale, you could purchase them by
searching for W001166667 on Wayfair.
(3)Why can't the light be turned off during the daytime sometimes?
The light sensor needs to receive the light change information to control the
lighting on and off. If the lamp is installed in the shade/eaves or other dark
places, the light sensor will not be able to receive the light signal normally,
so it probably cannot automatically turn off the lamp during the day.
(4)Is the light bulb replaceable?
Yes, but the light bulb is not included. You can replace it with a suitable
bulb (A19 type bulb is recommended). Please cut off the power before
replacing the bulb.
(5)Can I turn off the light control function if I don't want to use it?Yes.
You can use black tape to cover the photocell sensor lens,and then use
your own switch to control the wall lamp on and off.
05
4.Aftersales service
EDISHINE warrants this product to be free from defects in material
and workmanship for a period of one year from the date of purchase.
Warranty is void if damage is caused by misuse or improper installation.
Our dedicated customer service team will get back to you within 24 hours.
5.Aftersales FAQS

06
(6)Can this lamp be used outdoors in rainy and snowy weather?
Yes. With a rubber pad at the top and a drainage hole at the bottom, the
post light can discharge condensed water and other accidental water
effectively.