John Lewis DOME TABLE LAMP User manual

DOME
TABLE LAMP
USER GUIDE
5
YEARS
Aftercare and
Troubleshooting
5 year guarantee At John Lewis & Partners we test every light to high quality standards so we
are able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities across
the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
Please retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Please ensure all screws and small pieces are properly tightened to the product.
When changing a bulb, always switch off the mains and allow the bulb to cool
down before handling.
A bulb’s watt rating indicates how much energy it uses. The higher the watt,
the more energy it requires. Lumens is a measure of brightness. The higher
the number of lumens, the brighter the light.
We recommend cleaning with a soft dry cloth. Do not use abrasive materials
as these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and
compatibility.
Max. power: 10W
Voltage: 220–240V~50Hz
IP rating: 20
Weight: 1.5 kg

Thank you for purchasing this Dome Table Lamp.
Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
01
Introduction
1 PC
1 PC
1 PC
1 PC
1 PC
A
B
C
Description
Lamp Body + Base
Harp
CSocket Ring
C
DShade
C
ENut
Image Quantity
Parts list
Recommended
bulb
Warnings
01
10 watt E14 LED bulb
Bulb is replaceable
Bulb not included
This lamp is for indoor use only.
This product is Class II.
The supply cord cannot be replaced. If the cord is damaged, the floor lamp should
be destroyed in order to avoid a safety hazard.
Always use the correct type and rated power bulb. Never exceed the rated power
stated.
Dispose of used bulbs carefully.
02
1
3
2
Product assembly
1. Carefully unpack the carton, making sure
all parts are included before assembly.
Place lamp parts on a flat surface.
2. Place harp (B) onto socket and tighten it
with socket ring (C).
NOTE: Socket ring (C) is pre-assembled onto
lamp body (A), please unscrew socket ring
(C) before assembling shade (D).
3. Place shade (D) onto harp (B) and tighten
it with nut (E).
NOTE: Nut (E) is pre-assembled on harp (B),
please unlock nut (E) before assembling
shade (D).
B
B
D
E
A
C