Edison EdEngineering Pack 1 EdGraph User manual

EdDozer
EdEngineering – Pack 1

EdEnginerring – Pack 1
mybrick.com.au
Edison and LEGOcompatibility
LEGO bricks can be attached to the top and bottom of the Edison robot and LEGO pegs
can be attached on the sides. There are three types of holes on the side of Edison:
Hole type
Description
Connects to
Pin hole Full depth for connecting pegs
Stud hole Normal stud depth can be used for half pegs
Cross axle Powered output that rotates
stud hole
stud hole
stud hole
pin hole
powered cross axle
socket
2 x pin holes
stud hole
2 x8 studs
2 x8 studs
Edison’s side and top LEGO connections
2 x 8 sockets
2 x 8 sockets
Removable skid
2 x2 studs
Edison’s bottom and wheel LEGO connections

EdEnginerring – Pack 1
mybrick.com.au
Program EdDozer’s Front Blade
Drive the top Edison over the following barcodes. Use buttons that correspond well with
blade up and blade down on the remote control, but don’t use the buttons that you want to
drive the EdDozer with. See suggested button arrangement below, although your remote
control will likely be different.
Reading thebarcode
1. Place Edison facing the barcode on the right side
2. Press the record (round) button 3 times
3. Edison will drive forward and scan the barcode
4. Press a button on your TV/DVD remote that you want to activate that function
Suggested button setup
Barcode – IR learn blade up
Barcode – IR learn blade down
Front bladeup
Front blade down
driveforward
spin right
spin left
drivebackward

EdEnginerring – Pack 1
mybrick.com.au
Programdriving Edison
The bottom Edison will control the movement of the EdDozer (forwards, backwards, spin
left and spin right). Drive this Edison over the following barcodes. Use buttons that
correspond well with the driving manoeuvres on the remote control, but don’t use the
buttons that you want to control the bucket with.
Reading thebarcode
1. Place Edison facing the barcode on the right side
2. Press the record (round) button 3 times
3. Edison will drive forward and scan the barcode
4. Press a button on your TV/DVD remote that you want to activate that function
Barcode – IR learn drive forward
Barcode – IR learn drive backward
Barcode – IR learn spin right
Barcode – IR learn spin left

EdEnginerring – Pack 1
mybrick.com.au
EdDozer Parts
Join 2x34 Tracks pieces
Into 2x Tracks

EdEnginerring – Pack 1
mybrick.com.au
Step 1
Step 2

EdEnginerring – Pack 1
mybrick.com.au
Step 3
Step 4

EdEnginerring – Pack 1
mybrick.com.au
Step 5
Step 6

EdEnginerring – Pack 1
mybrick.com.au
Step 7
Step 8

EdEnginerring – Pack 1
mybrick.com.au
Step 9
Step 10

EdEnginerring – Pack 1
mybrick.com.au
Step 11
Step 12

EdEnginerring – Pack 1
mybrick.com.au
Step 13
Step 14

EdEnginerring – Pack 1
mybrick.com.au
Step 15
Step 16

EdEnginerring – Pack 1
mybrick.com.au
Step 17
Step 18

EdEnginerring – Pack 1
mybrick.com.au
Step 19
Step 2 0

EdEnginerring – Pack 1
mybrick.com.au
Step 21
Step 2 2

EdEnginerring – Pack 1
mybrick.com.au
Step 2 3
Step 2 4

EdEnginerring – Pack 1
mybrick.com.au
Step 2 5
Step 2 6

EdEnginerring – Pack 1
mybrick.com.au
Step 2 7
Step 2 8

EdEnginerring – Pack 1
mybrick.com.au
Step 2 9
Step 3 0