Edison EdEngineering Pack 1 EdGraph User manual

EdHockey
EdEngineering – Pack 1

EdEnginerring – Pack 1
mybrick.com.au
Edison and LEGOcompatibility
LEGO bricks can be attached to the top and bottom of the Edison robot and LEGO pegs
can be attached on the sides. There are three types of holes on the side of Edison:
Hole type
Description
Connects to
Pin hole Full depth for connecting pegs
Stud hole Normal stud depth can be used for half pegs
Cross axle Powered output that rotates
stud hole
stud hole
stud hole
pin hole
powered cross axle
socket
2 x pin holes
stud hole
2 x8 studs
2 x8 studs
Edison’s side and top LEGO connections
2 x 8 sockets
2 x 8 sockets
Removable skid
2 x2 studs
Edison’s bottom and wheel LEGO connections

EdEnginerring – Pack 1
mybrick.com.au
ProgramHockey Sticks Edison
Drive the top Edison over the following barcodes. Use buttons that correspond well with
sticks clockwise and sticks anti-clockwise on the remote control, but don’t use the buttons
that you want to drive the EdHockey with. See suggested button arrangement below,
although your remote control will likely be different.
Reading thebarcode
1. Place Edison facing the barcode on the right side
2. Press the record (round) button 3 times
3. Edison will drive forward and scan the barcode
4. Press a button on your TV/DVD remote that you want to activate that function
Suggested button setup
Barcode – IR learn clockwise
Barcode – IR learn anti-clockwise
clockwise
anti-clockwise
driveforward
spin right
spin left
drivebackward

EdEnginerring – Pack 1
mybrick.com.au
Programdriving Edison
The bottom Edison will control the movement of EdHockey (forwards, backwards, spin left
and spin right). Drive this Edison over the following barcodes. Use buttons that correspond
well with the driving manoeuvres on the remote control, but don’t use the buttons that you
want to control the bucket with.
Reading thebarcode
1. Place Edison facing the barcode on the right side
2. Press the record (round) button 3 times
3. Edison will drive forward and scan the barcode
4. Press a button on your TV/DVD remote that you want to activate that function
Barcode – IR learn drive forward
Barcode – IR learn drive backward
Barcode – IR learn spin right
Barcode – IR learn spin left

EdEnginerring – Pack 1
mybrick.com.au
EdHockey Parts
Step 1

EdEnginerring – Pack 1
mybrick.com.au
Step 2
Step 3

EdEnginerring – Pack 1
mybrick.com.au
Step 4
Step 5

EdEnginerring – Pack 1
mybrick.com.au
Step 6
Step 7

EdEnginerring – Pack 1
mybrick.com.au
Step 8
Step 9

EdEnginerring – Pack 1
mybrick.com.au
Step 10
Step 11

EdEnginerring – Pack 1
mybrick.com.au
Step 12
Step 13

EdEnginerring – Pack 1
mybrick.com.au
Step 14
Step 15

EdEnginerring – Pack 1
mybrick.com.au
Step 16
Step 17

EdEnginerring – Pack 1
mybrick.com.au
Step 18
Step 19

EdEnginerring – Pack 1
mybrick.com.au
Step 2 0
Step 21

EdEnginerring – Pack 1
mybrick.com.au
Step 2 2
Step 2 3

EdEnginerring – Pack 1
mybrick.com.au
Step 2 4
Step 2 5

EdEnginerring – Pack 1
mybrick.com.au
Step 2 6
Step 2 7

EdEnginerring – Pack 1
mybrick.com.au
Step 2 8
Step 2 9

EdEnginerring – Pack 1
mybrick.com.au
Step 3 0
Step 31