eelo CYGLO User manual
CYGLO
Cycling Backpack with LED Signal Light
User Guide
®
Thank you
for purchasing the eelo cycling backpack.
In order to use and maintain this product correctly,
please read this user guide completely.
This product has been specifically designed to keep
cyclists safe at dusk/night time. When in use the
bright LED signal display will alert motorists of your
presence and next intention.
Special Instructions:
1. The LED signal lights are only for the purpose of
alerting people behind/around you, they cannot be
treated as traffic signal lights.
2. This product can also be used for other outdoor
activites such as jogging etc.
3. All rights to the following statements are reserved
by eelo.
What this package contains:
• One backpack
• One LED display
• One remote controller with adjustable plastic mount
• One charging micro-USB cable
• One user guide
1. On/Off Button
2. LED Signal Light
3. Cycling Signal
4. Right-turning Signal
5. Left-turning Signal
6. Hazard Signal
7. Signal Selection
8. Remote Control Mount
9. Backpack
1
2
4
6
3
8
5
9
Components
7
Specications
Wireless frequency: 2.4GHz
Transmission distance: 3-5 meters
Remote Control
Battery: 3.7 V, 250 mAh rechargeable Lithium battery
(directly plugs into the USB power adapter to charge)
Working time: 20 hours
Charging: DC 5 V 500 mA
LED Display
3.7 V, 1150 mAh rechargeable Lithium battery
(directly plugs into the USB power adapter to charge)
Working time: 8 hours continuously
Charging: DC 5 V 500 mA
Backpack
Material: Nylon
Product Size: 17” x 12” x 4.6”
Weight: 365 g
For best performance, charge the LED display
and remote controller for 1.5 hours before use.
LED Display:
Power on: Press the On/Off button.
Four different LED signal lights will light up one by one
as shown below.
The LED display will then go into stand-by mode. It
won’t be re-activated until the remote controller is on.
Power o: Press the On/Off button while the LED
display is working normally. The LED signal lights
will go off immediately.
Remote Control:
Power on: Slide the button back and hold for
5 seconds, 3 different signal
icons will light up
(Cycling/left/right)
Once the signals icons
disappear, it is ready to use.
The LED display Power On
signal light will also light up.
Power o: Slide the button back while in use and
hold for 5 seconds.
How it works
There are two different working modes that work insync
depending on how the remote control is operated:
•
Manual control
•
Automatic Mode
Manual control mode:
Navigation arrows will display when you slide the
button to the left or to the right.
White cycling-shape LED signal light will display
when you push the button forward.
The hazard signal will display when you slide the button
back.
A. Cycling Signal: White cycling-shaped LED
signal lights.
B. Left-turning Signal.
C. Right-turning Signal.
D. Hazard Signal: Use when you have stopped or
there is an incident ahead.
Automatic modes:
After 7 seconds of remote control inactivity, automatic
mode is activated by the motion sensor built
inside the remote control.
The white cycling signal flashes when you’re cycling
normally.
If you are standing still or break suddenly, the motion
sensor built inside the remote control will
automatically trigger the the flashing hazard signal.
If there is no motion/remote control activity after 26
seconds the LED display and remote control will go into
standby mode.
To re-activate the LED display, slide the remote control
button in any direction.
While using an e-bike
With an e-bike the motion sensor may not detect
movements in automatic mode. We recomend you use
the manual control mode with any e-bike.
How to install & remove remote controller
How to install:
How to remove:
•
Clip o
•
Loosen RC mount
How to charge:
•Fully-charged indicator (Blue)
•Charging indicator (Red)
•Power Capacity indicator
<30% (Red)
Micro-USB cable to charge •Fully-charged indicator (Blue)
•Charging indicator (Red)
•Power Capacity
<30% / Power on (Red)
Should you need assistance using your CYGLO LED
Backpack, please call or email our friendly technical
support team who will be happy to help.
Email: [email protected]
Phone: UK: 0800 652 7780
US: 408 - 872 - 6822
International: +44 800 652 7780
Address: eelo Products, Lakeside Technology Park
Swansea, Wales, UK, SA7 9FF.
Website: www.eeloproducts.com
Contact Us
FAQ
Q. There is no red hazard light when you slide the
remote control button backwards.
A. The device has most likely run out of battery charge,
recharge the remote control and try again.
Q. There is no signal being displayed in the LED display.
A. The device has most likely run out of battery charge,
recharge the LED display and try again.
10
www.eeloproducts.com
®
