Efco TPC-5215 User manual

TPC-5215
Embedded System Touch Panel PC
User Manual
Version 1.0
Published January 2016
Copyright©2016 EFCO. All rights reserved.

i
Embedded System Touch Panel PC TPC-5215
Revision History
Revision
Date
Description
1.0
2015/07/30
First release
1.1
2016/02/24
Add revision history

ii
Embedded System Touch Panel PC TPC-5215
Copyright Notice
This document is copyrighted, 2016. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or
for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, EFCO assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
EFCO reserves the right to make changes in the product design without notice to its
users.
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows® is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
Intel® and Pentium® are trademark of Intel Corp.
All other product names or trademarks are properties of their respective owners.

iii
Embedded System Touch Panel PC TPC-5215
Packing List
Before setting up your product, please ensure the following items have been shipped:
1 x TPC-5215
6 x Mounting brackets and screws
1 x Adapter
1 x Product DVD (or USB Stick) with User Manual(PDF) and Drivers
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
About Manual
This User Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the http://www.efcotec.com for the latest version of this
document.
Product Warranty (2 years)
EFCO warrants to you, the original purchaser, that each of its products will be free
from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by EFCO, or which have been subject
to misuse, abuse, accident or improper installation. EFCO assumes no liability under
the terms of this warranty as a consequence of such events.
Because of EFCO’s high quality-control standards and rigorous testing, most of our

iv
Embedded System Touch Panel PC TPC-5215
customers never need to use our repair service. If an EFCO product is defective, it will
be repaired or replaced at no charge during the warranty period. For out-of-warranty
repairs, you will be billed according to the cost of replacement materials, service
time, and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, EFCO
product Spec, other software and hardware used, etc.) Note anything abnormal
and list any onscreen messages you get when the problem occurs.
2. If your product is diagnosed as defective, obtain an RMA (Return Merchandise
Authorization) number from your account sales or EFCO website. This allows us to
process your return more quickly.
3. Carefully pack the defective product, a fully-completed repair and replacement
order card and photocopy proof of purchase date (such as your sales receipt) in a
shippable container. A product returned without proof of the purchase date is not
eligible for warranty service.
4. Write the RMA number visibly on the outside of the package and ship it prepaid to
EFCO.
Warnings, Cautions and Notes
Warnings indicate conditions, which if not observed, can cause personal
injury!
Cautions are included to help you avoid damaging hardware or losing
data.
Notes provide optional additional information.

v
Embedded System Touch Panel PC TPC-5215
Safety Instructions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references.
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware. 5. No connections should be made when the system is powered as a
sudden rush of
power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power supply
to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls.
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running.
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any static-
shielded containers.
17. If any of the following situations arises, please contact our service personnel:
I. Damaged power cord or plug.
II. Liquid intrusion to the device.
III. Exposure to moisture.
IV. Device is not working as expected or in a manner as described in this
manual.
V. The device is dropped or damaged.
VI. Any obvious signs of damage displayed on the device.

vi
Embedded System Touch Panel PC TPC-5215
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE THE
STORAGE TEMPERATURE IS BELOW 0° C (32°F) OR ABOVE 50°C (122°F) TO
PREVENT DAMAGE.
FCC Statement
FCC Class A:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.

vii
Embedded System Touch Panel PC TPC-5215
China RoHS Requirements (CN)
FCC Class A:

viii
Embedded System Touch Panel PC TPC-5215
China RoHS Requirements (EN)
FCC Class A:

ix
Embedded System Touch Panel PC TPC-5215
Contents
Revision History.......................................................................................................................................i
Copyright Notice ....................................................................................................................................ii
Acknowledgement .................................................................................................................................ii
Packing List............................................................................................................................................ iii
About Manual ....................................................................................................................................... iii
Product Warranty (2 years)................................................................................................................... iii
Warnings, Cautions and Notes.............................................................................................................. iv
Safety Instructions ................................................................................................................................. v
FCC Statement....................................................................................................................................... vi
China RoHS Requirements (CN) ........................................................................................................... vii
China RoHS Requirements (EN) .......................................................................................................... viii
Contents................................................................................................................................................ ix
Chapter 1................................................................................................................................................1
1.1 Introduction .............................................................................................................................2
1.2 Features....................................................................................................................................2
1.3 Specifications ...........................................................................................................................3
Chapter 2................................................................................................................................................7
2.1 Dimension ................................................................................................................................8
2.2 Standard I/O Indication............................................................................................................8
2.2.1 I/O Indication View .......................................................................................................8
2.2.2 Power ON/OFF Button ..................................................................................................9
2.2.3 Power Input Connector.................................................................................................9
2.2.4 Speaker..........................................................................................................................9
2.2.5 Audio Connector ...........................................................................................................9
2.2.6 USB Connector............................................................................................................10
2.2.7 Ethernet Connector(LAN)............................................................................................10
2.2.8 VGA Connector............................................................................................................11
2.2.9 High definition video output Connector.....................................................................11
2.2.10 COM Port...................................................................................................................12
2.3 Expansion Slot........................................................................................................................13
2.3.1 Expansion Slot location...............................................................................................13
2.3.2 SO-DIMM Connector_①.............................................................................................14
2.3.3 SATA 1 Connector_②..................................................................................................14
2.3.4 PCI Express Mini Card_③④ .......................................................................................14