EFX EFF520 User manual

Confetti Machine (EFF520)
Confetti Machine (EFF520)Confetti Machine (EFF520)
Confetti Machine (EFF520)
• Dimensions: 75cm x 75cm x 42cm
Dimensions: 75cm x 75cm x 42cm Dimensions: 75cm x 75cm x 42cm
Dimensions: 75cm x 75cm x 42cm
• Weight: 9.5Kg
Weight: 9.5KgWeight: 9.5Kg
Weight: 9.5Kg
• oltage: 240v 50hz
oltage: 240v 50hzoltage: 240v 50hz
oltage: 240v 50hz
• Power use: 110w
Power use: 110wPower use: 110w
Power use: 110w
• Spray Range: 80m2 at a 10m height
Spray Range: 80m2 at a 10m heightSpray Range: 80m2 at a 10m height
Spray Range: 80m2 at a 10m height
• 1.5Kg capacity
1.5Kg capacity1.5Kg capacity
1.5Kg capacity
• Manual and DMX operated
Manual and DMX operatedManual and DMX operated
Manual and DMX operated
• Digital display
Digital displayDigital display
Digital display
• Operation time to empty 30 seconds
Operation time to empty 30 secondsOperation time to empty 30 seconds
Operation time to empty 30 seconds
To obtain the best performance from your Confetti Machine please
To obtain the best performance from your Confetti Machine please To obtain the best performance from your Confetti Machine please
To obtain the best performance from your Confetti Machine please
read the instructions before use.
read the instructions before use.read the instructions before use.
read the instructions before use.
1. Before use please check the machine to ensure no damage has occurred during transit,
in the event of any damage do not use the product and contact your dealer.
2. This machine is designed to be used in conjunction with confetti products which are pur-
chased separately.
3. The product operates best at a height of 10metres.
4. The product is for indoor use only.
5. Never leave the unit running unattended.
6. Disconnect the power when not in use.
7. Position the machine in a well ventilated area ideally hanging from a central point.
EFX (Entertainment FX)
CONFETTI MACHINE TRUSS MOUNT
Instructions for use
Instructions for useInstructions for use
Instructions for use

1. DMX Socket 3Pin In/Out
2. Digit l Displ y P nel
3. Net
4. Confetti Nozzle
5. H nging Br cket
6. Knob
7. S fety Ring (second ry Fixing)
8. Power in
9. Power Out
EFX (Entertainment FX)
1.
2.
3.
4.
5.
6.
7.
8.
9.
FIGURE 1.
FIGURE 2
FIGURE 3

EFX (Entertainment FX)
OPERATION:
To fill the machine use a paper confetti this can be added by sliding the grille to one side
and then fill the confetti bowl (as shown in figure 2).
Fix the Confetti Canon in the ceiling of your venue using the bracket ( ) and the neces-
sary hook clamp (not supplied). Always ensure a secondary fixing such as a safety chain
(not supplied) is attached to the safety ring (7). Once installed run your power lead and
DMX cable if operating using DMX.
MANUAL OPERATION
The machine can operate on either manual mode or DMX, to operate the machine manu-
ally you simply press “Manual” and “Enter” at the same time, this will start the machine,
to stop the machine press the “Manual” and “Enter” buttons together again. You can set
this operation on the machine and then simply switch the mains power on and off.
DMX OPERATION
1. Set the DMX address using the Up and Down keys on the Digital Display (2)
2. The unit uses a single channel of DMX and once set can be operated from a simple DMX desk in
either an “On” or “Off” mode .
When operating the machine at a height of 10metres the spread of the confetti will be approximately
80m2.
To empty the machine will take approximately seconds.

EFX (Entertainment FX)
Distributed in the UK by
Tel: [phone]
E-m il: info@b tmink.co.uk
Web: www.b tmink.co.uk
Warranty
WarrantyWarranty
Warranty
This product carries a 1 year warranty from the date of purchase subject to the following
conditions:
• This warranty is only valid for products used in accordance with the manufacturer’s
Instructions.
• This product must not be modified or changed in any way. Any such modifications will
invalidate this warranty.
• Proof of purchase will be required in order to validate warranty.
• No responsibility or liability is accepted for any direct or consequential damage, loss or
other expense arising from misuse, or incorrect installation or operation of this appliance.
PROBLEM REASON SOLUTION
Machine does not work Mains power has not been
connected
Check mains power lead has
been connected.
Something has jammed the
mechanism.
Check inside the confetti con-
tainer that nothing has
jammed the mechanism
Confetti only falls a short
distance
Machine has been installed at
a very low height
Ideal height is 10metres, low-
er heights will reduce the
spread of the machine
Machine humming but not
rotating
Specification
SpecificationSpecification
Specification