EGi DOMOS2 User guide

Electroacústica
General
Ibérica, S. A.
english installer's manual extended guide

Dear Installer,
I am pleased to present you DOMOS2, the new EGi
series for homes.
EGi takes another step forward in the field of domestic
equipment with DOMOS2.
We have invested all necessary time and means to offer
the user an innovative and easy to handle series, which
combines Hi-Fi stereo sound with a home domotic
system.
Besides offering leading products in the sound system
market, EGi also facilitates the installation process to
the electrical installer. Therefore, DOMOS2 modules
have been designed with systems that significantly
simplify installation, enlargement or replacement of
any module in this new series.
I wish you enjoy DOMOS2 and invite you to give us
your opinion on this series, as well as any comments
that would help us improve our EGi sound products.
I thank you once again for your confidence in EGi.
Antonio Sánchez
CHAIRMAN
You will find an EGi CONTROL UNIT installed in each room.
This module allows you to listen to the audio programs of
the system in the room, turn the volume up/down, change
the audio program, intercom with other rooms, etc.
There are other modules available that give additional services
to the installation when connecting them to the Central Unit,
for instance: door phone intercom, domotic services, lighting
control, GSM communication, GPS clock, etc.
This manual gives a detailed description of each module and
describes how to configure them.
YOUR INSTALLATION
DOMOS2 Series is based on a modular structure.
The main module of the installation is the CENTRAL UNIT
for DIN rail mounting (or ø60 mm box).
This module distributes audio and manages all additional
services provided by the series.
It is usually installed with the main audio equipment. Central
units for ø60 mm box have the same function as central units
for DIN rail mounting, but they must be combined in order to
have similar features.

www.egiaudio.com
Compatibility charts
3
www.egiaudio.com
Compatibility charts
The wiring diagrams contained herein are presented as examples only. All elements in the DOMOS2 series can be fr eely combined (within
the limitations of each module) to configure a completely customised installation.
b1 b2 b3 b4 b5 m1 m2 m3 m4 t1 t2 2nd home
services
Audio programs 1/ 2/ 31 1 2 1 / 3 1 / 3 1 / 312233
Clock
Intercom
Surveillance/Babyphone
Remote Control
Headphones
Bell
Door phone
Message
Zone name kitchen
Intruder alarm
Domotic functions
LIGHTING atmospheres
Home control / ...
GSM GSM
GPS clock and
exterior temperature
ONLY MESSAGE RECEPTION.
b1 b2 b3 b4 b5 m1 m2 m3 m4 t1 t2 2nd home
central units (for DIN rail)
40010
40020
40040
40050
40060
central units (for ø60 mm box)
40070
40080
40090
40200
control units
40220
40221
40271
40281
40300
auxiliary modules
40140
40150
40160
40310
40410
40425
40510
40521
40530
40540
40550
40610
40620
40650
power supplies
40710
40720
40730

Turned on
Turned off
OK
Cancel
Forward
Backward
Menu key
Menu exit key
Turn the volume up
Turn the volume down
Next memory/program
General function
Local function
Domotic functions
Audio function
Listen function
Intercom function
Clock
Timer
Alarm clock
Carillon
Talk
Listen
Do not disturb
Surveillance/Baby sitter
Open door phone
Cancel door phone
Messages
SOS Alarm
Fire alarm
Gas alarm
Flooding alarm
Intruder alarm (1 and 2)
Symbols
ACOUSTIC SURVEILLANCE / BABYPHONE
Your control unit will alow you to surveil the zone in which it is installed, so you
can check if your baby is quiet or a sick relative needs help.
REMOTE CONTROL
Remote control of the sound equipment (IR Link output, infrared remote control for
switching on/off and remote control of the user’s sound system from any room that
has a 40271, 40281 or 40300 control unit installed, or with the EGi ref. 40130
and 40100 remote control or with the remote control of the music source itself).
CLOCK
The control units of the installation display the time in stand-by mode.
ALARM CLOCK
The control unit has a built in alarm clock function, which can be used by connecting
the system at a specific time or activating the buzzer.
INTERCOM
DOMOS2 system allows you to communicate with any zone from any room of the
installation.
BELL
All DOMOS2 central units can be easily connected to the doorbell, so a tone will
be generated through the whole EGi installation when the doorbell rings.
Run potential-free direct conductors from the push button of the house to wire
the doorbell connector. Do not put in parallel with the buzzer.
When the door bell rings, a melody will be played in those zones of the installation
in which this service is activated.
CARILLON
Using this service, a musical carillon will play its tune every quarter-hour, half-hour
or hour for the whole installation.
DOOR PHONE
DOMOS2 Door phone function will allow you to answer and open the door when
receiving a call. You may connect to the installation up to 3 different doors (PORT 1,
PORT 2, PORT 3).
Miscellaneous
Lighting atmospheres (1,2,3 and 4)
Awning
Blind
Heating
Thermostat
Relay
Press the key
Hold the key
TIMER
The control unit with built-in timer will automatically turn off the system after a
maximum time limit of 59 minutes.
DO NOT DISTURB FUNCTION
You may activate the DO NOT DISTURB function to mute any communication from
the bell, entry phone or intercom in the zone where the control unit is installed.
MESSAGE RECORDER FUNCTION
Control units of ref. 40271, 40281 or 40300 have been upgraded with the message
function. Using this service, you may record a voice message (max. 20 seconds).
DOMOTIC FUNCTIONS (DOMOTIC SCENES & LIGHTING ATMOSPHERES)
40271, 40281 or 40300 Control units will enable you to control the connection
or disconnection of home electrical appliances, local thermostat, rolling up/down
the awnings and pulling up/down the blinds.
You will also be able to combine these devices in order to activate/deactivate them
simultaneously at your choice, by just pressing one button (domotic scenes).
40620 + 40550 or 40300 + 40550 Modules will enable you to adjust different
light intensities and control up to 4 lamps at the touch of a button.
THERMOMETER AND THERMOSTAT
40271, 40281 and 40300 Control units can display interior and exterior temperature
(with 40530 module) and control a thermostat in order to reach the desired room
temperature.
SOS FUNCTION
You may alert about a dangerous situation or someone in need of help by pressing
the in-wall control unit or remote control.
INSTALLATION CONTROL THROUGH TELEPHONE
You may control your installation remotely from any mobile or fixed telephone using
40521 module.
Services
Symbols and services 4
www.egiaudio.com
Symbols and services

www.egiaudio.com
Table of contents
Compatibility charts
Compatibility charts 3
Symbols and services
Symbols and services 4
Cables and technical data
Limits. Cables, terminal block and connections 6
Examples of installations
Examples of installations 8
Installation start-up
Installation start-up 25
Features and connection diagrams
40710, 4720, 4730 Power supplies 30
40425, 40430 Audio power stages 31
40010, 40050, 40020, 40040, 40060 Central units (for DIN rail mounting) 33
40090, 40070, 40080, 40200 Central units (for ø60 mm box) 35
40220, 40221, 40271, 40281, 40620, 40300 Control units 38
40100, 40130 Remote controls 44
40410, 40420, 40521, 40530, 40580 Interface modules 45
40140, 40150, 40310 Auxiliary modules (for ø60 mm box and tabletop) 49
40510, 40540, 40640, 40550 Auxiliary modules (for DIN rail mounting) 52
40630, 40650, 40660 Other auxiliary modules (for flush-mounting box) 55
G13U/16, G28N/16, G14A/16, G17F/16, G18F/16 Loudspeakers 56
Accessories and adaptation
Front trims 58
Adaptation of control units to electrical mechanisms made by other manufacturers 59

control units consumption (max)
40220 195 mA
40221 215 mA
40271 230 mA
40281 235 mA
40300 240 mA
40620 60 mA
interface modules consumption (max)
40410 100 mA
40420 100 mA
40521 250 mA
40530 150 mA
40580 -- -- mA
central unit (for DIN rail) consumption (max)
40010 60 mA
40020 100 mA
40040 110 mA
40050 70 mA
40060 150 mA
central unit (for ø60 mm box) consumption (max)
40070 45 mA
40080 80 mA
40090 50 mA
40200 70 mA
auxiliary modules consumption (max)
40140 20 mA
40310 240 mA
40510 100 mA
40540 150 mA
40550 30 mA (15 V=)
40550 8.7 mA (230 V~)
40610 60 mA
40640 120 mA
40630 30 mA
40650 150 mA
40660 120 mA
Cables and technical data
6
www.egiaudio.com
Limits
LINE LENGTH
The maximum line length is determined by the voltage drop along the cable. To determine whether or not there is enough voltage in the module, voltage between
2and 0wires must be over 13 volts. The voltage drop for 40180 and 40181 cables is based on the following formula:
dV = S x L x l
Where: Lmeans the length of the cable,
Smeans the conductor section; and
dV means the voltage drop measured in volts, which must be under 3.
The maximum length of the BUS must be 125 m. If you need more cable length, make a “star-shape” installation.
INSTALLATION ELEMENTS
The maximum number of modules supported by an installation will depend on their individual consumption. This consumption will determine the type of power
supply. The intensity along the cable will limit the length of the line, according to the formula of the previous section “LINE LENGTH”. The maximum permissible
intensity of the power supply cables (2and 0) is 7 A.
Make sure you remember to connect the cases of the EGi elements to the ground wire of the installation.
DOMOS2 equipments must be installed according to the ITC-BT-51 norm on “Installation of automation, energy management, building and home
security systems”, compliant with the Spanish REBT standard (“Electro-technical Regulations for Low Voltage”), in accordance with RD 842/2002.
Cables
WARNING:
Please be very cautious when
connecting the BUS.
The colours used to distinguish
the conductors do not corres-
pond to the colours used in the
previous DOMOS series.
conductor mm2function voltage programs
21.50 (+) 15 V= Power supply 15 V= -- --
01.50 Ground 0 V -- --
10.25 Intercom data line Digital signal Intercom
30.25 Intercom audio 3 V audio Intercom
4 0.25 Audio 3 V audio; +7 V= 1 L
50.25 Audio 3 V audio; +7 V= 1 R
60.25 Audio 3 V audio; +7 V= 2 L
70.25 Audio 3 V audio; +7 V= 2 R
80.25 Audio 3 V audio; +7 V= 3 L
90.25 Audio 3 V audio; +7 V= 3 R
+R0.75 Loudspeaker output (+) 3 V audio -- --
–R0.75 Loudspeaker output (common) 3 V audio -- --
+L0.75 Loudspeaker output (+) + stand-by amplifier 3 V audio; +3 V= -- --
–L0.75 Loudspeaker output (common) + stand-by amplifier 3 V audio -- --
MAXIMUM POWER OF THE INSTALLATION
The maximum permissible intensity of the power supply cables (2and 0) is 7 A. Therefore, the maximum power provided by the power supplies will be
105 W.
Cables and technical data
125 m
125 m125 m
125 m125 m
125 m

Flush-mounting boxes
7
www.egiaudio.com
40180
10-Conductor twisted cable.
Isolation: 450/750 V.
NOTE: Use ø20 mm corrugated tube.
40181
10-Conductor twisted cable with cover.
Isolation: 450/750 V.
NOTE: Use ø20 mm corrugated tube.
40750
2-Conductor parallel cable for loudspeaker.
Isolation: 300/500 V.
40760
3-Conductor parallel cable for loudspeaker.
Isolation: 300/500 V.
40170
Plug-in terminal block for derivation.
Cables, terminal block and connections
40110
IR transmitter cable for remote control.
0501
Wiring to connect audio equipments to a DOMOS2
system.
Stereo 3.5 mm Jack male to 2 RCA stereo.
1.5 m long.
0502
Wiring to connect audio equipments to a DOMOS2
system.
2 RCA elbowed male to 2 RCA stereo.
1.5 m long.
0503
Wiring to connect audio equipments to a DOMOS2
system.
Stereo 3.5 mm Jack male to stereo 3.5 mm Jack male.
2 m long.
V11F
130 x 265 x 45 mm box.
For central units + power supply in previous
DOMOS preinstallations. It is also used for EGi
loudspeaker of ref. G17F/xx.
Examples of linked boxes V11F
With the accessories of EGi front trims of ref. 40810
and 40820.
For electronic modules with rail band.
1 x 12M = 12 DIN rail modules wide.
2 x 12M = 24 DIN rail modules wide.
2 x 24M = 48 DIN rail modules wide.
100 x 160 mm Box
Derivation box for 1 room + sound + domotics.
4 relays of ref. EGi 40540 or alarm relay station
of ref. EGi 40630.
100 x 100 mm Box
Derivation box for 2 rooms, only sound.
It sets EGi terminal block or ref. 40170.
ø60 mm Box
Flush-mounting box for control units, central units,
modules and 2" loudspeaker of ref. EGi G13U/xx.
V19A, H28N and V29A
Flush-mounting box for 5" loudspeaker of ref.
EGi G14A/xx or loudspeaker with in-built amplifier
of ref. EGi 06011.
40460
Flush-mounting box for 20 W stereo amplifier+baffle
of ref. EGi 40440 or 80 W stereo amplifier+baffle
of ref. EGi 40450.
1 x 12M = 12 DIN rail modules wide
2 x 12M = 24 DIN rail modules wide
2 x 24M = 48 DIN rail modules wide
Cables and technical data
H28N
V19A
V29A

40070
40080
40090
40200
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
H1
H7
H6
H5
H4
H3
H2
Remaining
rooms
Remaining
rooms
Derivation box
100 x 100 mm
H3 + H4
Plug-in terminal block
ref. 40170
H3 + H4
40710
40720
40730
230 V~
Examples of installations
1 audio program
8
www.egiaudio.com
Preinstallation (basic - b1)
General line
Ref. 40180 / 40181
Installation (basic - b1)
V11F + 40810
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 conductors
ref. 40750
Impedance
16 Ω
H1
V11F + 40810
H1
H2
H2
H3... H7
H3... H7
2 conductors
ref. 40750
Impedance
16 Ω
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
The installation presented here provides a high quality stereo sound
system with a clock and an intercommunication unit* for the entire
installation. It is composed of basic elements from the DOMOS2 series.
The control units are references 40220 and 40221 (with local FM
tuner) fitted into a ø60mm box and the audio and clock sources are
the central unit reference 40070 (1 RCA input, fitted into a ø60mm
box.) and central unit reference 40090 (fitted into a ø60mm box). A
40710-type power supply is also necessary for the installation.
This installation provides 1 stereo audio channel and a clock for the
entire installation.
* Although the central control unit manages the intercommunication system, this type of control unit only
allows reception of messages. If you want an intercommunication service, install control units
40271/40281/40300 in the zones from which you wish to generate messages for the installation.
Impedance
16 Ω
Derivation box
100 x 100 mm
H1 + H2
Plug-in terminal block
ref. 40170
H1 + H2
Ø60 mm
box
V19A
H28N
V29A
V19A
H28N
V29A

H1
H7
H6
H5
H4
H3
H2
40070
40080
40090
40200
40070
40080
40090
40200
40710
40720
40730
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
230 V~
9
www.egiaudio.com
1 audio program + clock
Installation (basic - b2)
Preinstallation (basic - b2)
General line
Ref. 40180 / 40181
V11F + 40810
2 conductors
ref. 40750
Impedance
16 Ω
H1 H2 H3... H7
2 conductors
ref. 40750
Impedance
16 Ω
V11F + 40810
H1 H2 H3... H7
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
Ø60 mm
box
The installation presented here provides a high quality stereo sound
system with a clock and intercommunication unit * for the entire
installation. It is composed of basic elements from the DOMOS2 series.
The control units are references 40220 and 40221 (with local FM
tuner) fitted into a ø60mm box and the audio and clock sources are
the central unit reference 40070 (1 RCA input, fitted into a ø60mm
box.) and central unit reference 40090 (fitted into a ø60mm box). A
40710-type power supply is also necessary for the installation.
This installation provides 1 stereo audio channel and a clock for the
entire installation.
* Although the central control unit manages the intercommunication system, this type of control unit only
allows reception of messages. If you want an intercommunication service, install control units
40271/40281/40300 in the zones from which you wish to generate messages for the installation.
Derivation box
100 x 100 mm
H1 + H2
Plug-in terminal block
ref. 40170
H1 + H2
Remaining
rooms
Remaining
rooms
Derivation box
100 x 100 mm
H3 + H4
Plug-in terminal block
ref. 40170
H3 + H4
Impedance
16 Ω
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations

40070
40080
40090
40200
40070
40080
40090
40200
40070
40080
40090
40200
230 V~
40710
40720
40730
V11F + 40810
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
H1
H7
H6
H5
H4
H3
H2
2 audio programs + clock: 1 stereo audio program + FM
10
www.egiaudio.com
Preinstallation (basic - b3)
Installation (basic - b3)
General line
Ref. 40180 / 40181
2 conductors
ref. 40750
Impedance
16 Ω
H1 H2 H3... H7
2 conductors
ref. 40750
Impedance
16 Ω
Remaining
rooms
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
H1 H2 H3... H7
Ø60 mm
box
Ø60 mm
box
Remaining
rooms
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
The installation presented below is based on central units and provides
1 stereo audio program, 1 FM program, a common clock and
intercommunication* between zones. If you wish, you may add another
audio channel instead of the FM channel, replacing central unit 40080
with 40070. It is composed of basic elements from the DOMOS2 series.
The control units are references 40220 and 40221 (with local FM tuner)
fitted into a ø60mm box and the audio and clock sources are central unit
reference 40070 (1 RCA input, fitted into a ø60mm box.) and central unit
reference 40090 (fitted into a ø60mm box). A 40710-type power supply
is also necessary for the installation.
This installation provides 1 stereo audio channel with remote control of
the music source, 1 FM radio program, a clock for the entire installation
and intercommunication* between zones.
* Although the central control unit manages the intercommunication system, this type of control unit only allows
reception of messages. If you want an intercommunication service, install control units 40271/40281 /40300 in
the zones from which you wish to generate messages for the installation.
V11F + 40810
Derivation box
100 x 100 mm
H1 + H2
Plug-in terminal block
ref. 40170
H1 + H2
Derivation box
100 x 100 mm
H3 + H4
Plug-in terminal block
ref. 40170
H3 + H4
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations
2 conductors
General line

40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40710
40720
40730
40010
40050
V11F + 40810
230 V~
H1
H7
H6
H5
H4
H3
H2
Derivation box
100 x 100 mm
H1 + H2
Plug-in terminal block
ref. 40170
H1 + H2
Remaining
rooms
11
www.egiaudio.com
1/3 stereo audio programs + local FM
General line
Ref. 40180 / 40181
H1 H2 H3... H7
2 conductors
ref. 40750
Impedance
16 Ω
V11F + 40810
H1 H2 H3... H7
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
This installation is based on Central unit (40010 -1 program or 40050
-3 programs-) and provides 1 or 3 stereo audio programs, a common
clock and intercommunication between zones. It also enables the
remote control of audio sources and the connection of the house
doorbell, so it can be heard in the entire installation. It is composed
of basic elements from the DOMOS2 series.
The control units are references 40220 and 40221 (with local FM
tuner) fitted into a ø60mm box.
The features of the installation are 1 or 3 audio programs, acoustic
surveillance* for rooms and intercommunication*.
*Although the central control unit manages the intercommunication system, this type of control unit only allows
reception of messages. If you want an intercommunication service, install control units 40271 / 40281 / 40300
in the zones from which you wish to generate messages for the installation.
2 conductors
ref. 40750
Impedance
16 Ω
2 conductors
Remaining
rooms
Preinstallation (basic - b4)
Installation (basic - b4)
Derivation box
100 x 100 mm
H3 + H4
Plug-in terminal block
ref. 40170
H3 + H4
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations
DOORBELL CONNECTOR
Use potential-free contact.

H1
H7
H6
H5
H4
H3
H2
40140
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40220
40221
40271
40281
40300
40710
40720
40730
40010
40050
230 V~
Derivation box
100 x 100 mm
H1 + H2
1/3 audio progr. + local FM + line input/headphones
12
www.egiaudio.com
This installation is based on Central unit (40010 -1 program or 40050 -
3 programs-) and provides 1 or 3 stereo audio programs, a common
clock and intercommunication between zones*. It also enables the
remote control of audio sources and the connection of the house doorbell,
so it can be heard in the entire installation. In addition, module 40140
is included in bedrooms, enabling the connection of an MP3 or CD player
that can be heard over the room loudspeakers, and has a headphone
jack for individual listening.
The control units are references 40220 and 40221 (with local FM tuner)
fitted into a ø60mm box.
The features of the installation are 1 or 3 audio programs, acoustic
surveillance for rooms and intercommunication*, audio input and
headphone jack in the rooms.
*Although the central control unit manages the intercommunication system, this type of control unit only allows
reception of messages. If you want an intercommunication service, install control units 40271/40281/40300
in the zones from which you wish to generate messages for the installation.
Preinstallation (basic - b5)
Installation (basic - b5)
Plug-in terminal block
ref. 40170
H3 + H4
Derivation box
100 x 100 mm
H3 + H4
Remaining
rooms
General line
Ref. 40180 / 40181
H1
Plug-in terminal block
ref. 40170
H1 + H2
H2 H3... H7
2 conductors
ref. 40750
Impedance
16 Ω
V11F + 40810
H1 H2 H3... H7
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
V11F + 40810
2 conductors
ref. 40750
Impedance
16 Ω
2 conductors
Remaining
rooms
Ø60 mm
box
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations
DOORBELL CONNECTOR
Use potential-free contact.

H1
H7
H6
H5
H4
H3
H2
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40710
40720
40730
40220
40221
40271
40281
40300
40310
230 V~
Plug-in terminal block
ref. 40170
H3 + H4
3 audio programs + local FM 13
www.egiaudio.com
2 conductors
2 conductors
ref. 40750
General line
Ref. 40180 / 40181
2 conductors
ref. 40750
Impedance
16 Ω
V11F + 40810
Impedance
16 Ω
Impedance
16 Ω
Impedance
16 Ω
Impedance
16 Ω
H1
H1
H3... H7
H3... H7
H2
H2
V11F + 40810 Ø60 mm
box
Ø60 mm
box
Remaining
rooms
Derivation box
100 x 100 mm
H3 + H4
Plug-in terminal block
ref. 40170
H1 + H2
Remaining
rooms
Ø60 mm
box
This installation is based on a central unit (40010 – 1 program
– or 40050 –3 programs-) and provides 1 or 3 audio programs,
masterclock for the whole installation and room-to-room intercom.
It also allows the remote control of the audio sources and the
connection of the house bell, so it can be listened through the
whole installation. It is made up of DOMOS2 basic modules.
This installation includes control units of ref. 40271 and 40281
(with radio) for ø60 mm flush-mounting box.
This installation features 1 or 3 audio programs, acoustic
surveillance of the rooms / babyphone, intercom and message
recorder.
Preinstallation (medium - m1)
Installation (medium - m1)
Derivation box
100 x 100 mm
H1 + H2
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations
DOORBELL CONNECTOR
Use potential-free contact.

40010
40020
40040
40050
40060
40410
40420
40220
40221
40271
40281
40300
40310
40710
40720
40730
230 V~
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 x V11F + 40820
Ø60 mm
box
1 audio program + door phone interface + line input/headphones + local FM
14
www.egiaudio.com
2 conductors
General line
Ref. 40180 / 40181
2 x V11F + 40820
H1
H1
This installation is based on a central unit (40020 – 1 program – or 40040 –2 programs-) and provides
1 or 2 audio programs with FM, masterclock for the whole installation and room-to-room intercom.
It also allows the remote control of the audio sources and the connection of the house bell, so it can
be listened through the whole installation.
In addition, module 40140 is included in bedrooms, enabling the connection of an MP3 or CD player
that can be heard over the room loudspeakers, and has a headphone jack for individual listening.
40410 module will allow you to answer and open the door phone from any zone of the installation.
Preinstallation (medium - m2)
Installation (medium - m2)
V19A
H28N
V29A
Examples of installations
Plug-in terminal block
ref. 40170
H1 + H2
Derivation box
100 x 100 mm
H1 + H2
DOORBELL CONNECTOR
Use potential-free contact.

H1
H7
H6
H5
H4
H3
H2
40220
40221
40271
40281
40300
40310
40140
40150
40610
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40140
40150
40610
15
www.egiaudio.com
Remaining
rooms
General line
Ref. 40180 / 40181
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 conductors
ref. 40750
Impedance
16 Ω
Ref. 40180 / 40181
H2
H2
H3
H3
H4... H7
H4... H7
Ø60 mm
box
Ø60 mm
box
Remaining
rooms
Ø60 mm
box
Ø60 mm
box
This installation includes control units of ref. 40271 and
40281 (with radio) for ø60 mm flush-mounting box.
This installation features 1 audio program, acoustic
surveillance of the rooms / babyphone, intercom, audio
input and headphones output in the rooms and message
recorder.
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
Ref. 40180 / 40181
Ø60 mm
box
Plug-in terminal block
ref. 40170
H3 + H4
Derivation box
100 x 100 mm
H3 + H4
V19A
H28N
V29A
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations

40220
40221
40271
40281
40300
40310
40410
40420
40710
40720
40730
40010
40020
40040
40200
40070
230 V~
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
3 audio programs + USB + line input/headphones + local FM
16
www.egiaudio.com
H1
H1
Ø60 mm
box
Ø60 mm
box
This installation is based on a central unit (40020 – 1 program – or 40040 –2 programs-) and provides
1 or 2 audio programs, masterclock for the whole installation and room-to-room intercom.
It also allows the remote control of the audio sources and the connection of the house bell, so it can
be listened through the whole installation. A USB central unit has been added, providing an additional
program to the installation, raising the total number of channels in the installation to three (with central
unit 40040). This module enables music stored in a USB pen drive to be played in the whole installation.
In addition, module 40140 is included in bedrooms, enabling the connection of an MP3 or CD player
that can be heard over the room loudspeakers, and has a headphone jack for individual listening.
40410 module will allow you to answer and open the door phone from any zone of the installation.
General line
Ref. 40180 / 40181
2 x V11F + 40820
2 x V11F + 40820
Preinstallation (medium - m3)
Installation (medium - m3)
V19A
H28N
V29A
Examples of installations
2 conductors
Plug-in terminal block
ref. 40170
H1 + H2
Derivation box
100 x 100 mm
H1 + H2
DOORBELL CONNECTOR
Use potential-free contact.

H1
H7
H6
H5
H4
H3
H2
40140
40150
40610
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
17
www.egiaudio.com
H2 H4 H6... H7
H2 H4 H6... H7
This installation includes control units of ref. 40271 and
40281 (with radio) for ø60 mm flush-mounting box.
This installation features 2 or 3 audio programs, acoustic
surveillance of the rooms / babyphone, intercom, audio
input and headphones output in the rooms and message
recorder.
Remaining
rooms
General line
Ref. 40180 / 40181
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 conductors
ref. 40750
Impedance
16 Ω
Plug-in terminal block
ref. 40170
H3 + H4
Ø60 mm
box
Remaining
rooms
Ø60 mm
box
Ø60 mm
box
H3
H3
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 conductors
ref. 40750
Impedance
16 Ω
Plug-in terminal block
ref. 40170
H5 + H6
H5
H5
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
Derivation box
100 x 100 mm
H3 + H4
Derivation box
100 x 100 mm
H5 + H6
V19A
H28N
V29A
V19A
H28N
V29A
V19A
H28N
V29A
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations

40410
40420
40010
40020
40040
40050
40060
40510
40710
40720
40730
230 V~
40220
40221
40271
40281
40300
40310
2 audio programs + local FM + door phone + secutity + domotic central unit
18
www.egiaudio.com
H1
H1
Apart from the audio functions, this installation includes domotic services provided by 40510 domotic
central unit. The audio system is based on a central unit (40020 –1 program– or 40040 –2 programs–)
and provides 1 or 2 audio programs, masterclock for the whole installation and room-to-room intercom.
It also allows the remote control of the audio sources and the connection of the house bell, so it can
be listened through the whole installation.
In addition, module 40140 is included in bedrooms, enabling the connection of an MP3 or CD player
that can be heard over the room loudspeakers, and has a headphone jack for individual listening.
Regarding the domotic system, the domotic central control unit manages the alarm sensors in the
installation as well as controlling access to the house. It can communicate with the exterior using a
GSM 40521 module.
2 conductors
General line
Ref. 40180 / 40181
2 x V11F + 40820
2 x V11F + 40820
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
Regleta enchufable
de conexión ref. 40170
H1 + H2
Ø60 mm
box
Preinstallation (medium - m4)
Installation (medium - m4)
V19A
H28N
V29A
Examples of installations
Plug-in terminal block
ref. 40170
H1 + H2
Derivation box
100 x 100 mm
H1 + H2
DOORBELL CONNECTOR
Use potential-free contact.

40140
40150
40610
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40220
40221
40271
40281
40300
40310
40610
H1
H7
H6
H5
H4
H3
H2
H2 H4
H2 H4
General line
Ref. 40180 / 40181
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
2 conductors
ref. 40750
Impedance
16 Ω
Plug-in terminal block
ref. 40170
H3 + H4
Ø60 mm
box
Ø60 mm
box
Ø60 mm
box
H3
H3
2 conductors
ref. 40750
Impedance
16 Ω
Impedance
16 Ω
H5... H7
H5... H7
Ø60 mm
box
19
www.egiaudio.com
40410 module will allow you to answer and open the door
phone from any zone of the installation.
This installation includes control units of ref. 40271 and
40281 (with radio) for ø60 mm flush-mounting box.
This installation features 1 or 2 audio programs, acoustic
surveillance of the rooms / babyphone, intercom, audio
input and headphones output in the rooms and message
recorder.
Remaining
rooms
Ø60 mm
box
Remaining
rooms
Derivation box
100 x 100 mm
H3 + H4
V19A
H28N
V29A
V19A
H28N
V29A
V19A
H28N
V29A
Examples of installations

40410
40420
40010
40020
40040
40050
40060
40540 40550
40710
40720
40730
230 V~
20 3 audio programs + local FM + door phone + lighting control
www.egiaudio.com
H1
H1
The audio system presented is based on the Central unit (40040 -2 pr ograms- or 40060 -3 programs-) and
provides two or thr ee stereo audio pr ograms + 1 FM pr ogram with 18/27 pr esets, a common clock and
intercommunication between zones.
It also allows the r emote control of the audio sour ces and the connection of the house bell, so it can be
listened through the whole installation.
40410 module will allow you to answer and open the door phone from any zone of the installation.
By combining control unit 40620 and module 40550, it is possible to control the illumination of a zone or room,
creating atmospheres, or by individual control of 4 light fittings, either halogen, incandescent or fluorescent.
Relay module 40540 enables the automation of blinds and other local or general devices controllable with
a relay.
2 conductors
General line
Ref. 40180 / 40181
3 x V11F + 3 x 40810
V11F + 40810
Preinstallation (top - t1)
Installation (top - t1)
Examples of installations
V11F + 40810 V11F + 40810
See wiring diagrams of modules 40540 and 40550 (page 54)
DOORBELL CONNECTOR
Use potential-free contact.