EGS SHP Series User manual
Series 1000
Series 1000
SHP Series
Instruction Manual
Important Safety Instructions
Caution:
Input Specifications
OperatingArea
Output Specifications
Single Phase
(SHP Series – Operating Area)
Installation & Application Notes
INPUT
Control Connector Pin Out Control Signal Information
Installation & Application Notes
DC/DC Converter Output Modules
Single Output Module Control Signal information
Multiple Output Module
Control Signal Information
Control Signal Information
Mechanical Drawings
Mechanical/Electrical Hook-up Notes
SH15 and S3H15: 5-inch Case Size (5” x 5” x 11”)
(12 lbs. Max.)
S3H15 SH15
(A) AC HIGH
(B) Neutral
(C) Ground
SH20 and S3H20: 8-inch Case Size (5” x 8” x 11”)
(18 lbs. Max.)
S3H20 SH20
(A) AC HIGH
(B) Neutral
(C) Ground
Appendix A Installation and Operating Instructions
Technical Services
U.S.A................................................................ (800) 377-4384
International………………………………………(847) 679-7800
www.solaheviduty.com
While every precaution has been taken to ensure accuracy and completeness in this manual,
Sola/Hevi-Duty assumes no responsibility, and disclaims all liability for damages resulting from use
of this information or for any errors or omissions.
© 2002 Sola/Hevi-Duty. All rights reserved throughout the world. Specifications are subject
to change without notice.
® Sola/Hevi-Duty name and logo are registered trademarks of EGS Electrical Group, LLC.
All names referred to are trademarks or registered trademarks of their respective owners.
MJ/RP (20020807) Rev. 1
H:\Sola\Literature\Manuals\Power Supplies\SHP\SHP Series Manual8-07-2002
This manual suits for next models
5
Table of contents
Other EGS Power Supply manuals
