TDK-Lambda RWS-B Series User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the TDK-Lambda RWS600B-48 at our website: Click HERE

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_1
UNIT
・
PC Board
■ Features
● It is the simple function model who this product
maintains basic performance, and planned the
optimization of the addition function.
● Long service life: Electrolytic capacitors rated for a
minimum of 5 years (at Ta = 40℃, load factor = 100 %,
24 h/day).
● The model that is a standard product including a cover.
The optional model with the DIN rail mounting type and
DIN rail mounting bracket.
(The lineup consists of products with DIN rail mounting
brackets with 50W, 100W, 150W: 24V output types.)
● Supports UL508 standards (50W-150W: 5V/12V/24V
output models, and 300W-600W: 24V output models).
● Withstand 300VAC input for 5 Second (Please refer
instruction manual.)
Single output 50W - 600W
Output
Voltage
50W 100W 150W 300W 600W
Output
Current
MODEL
Output
Current
MODEL
Output
Current
MODEL
Output
Current
MODEL
Output
Current
MODEL
5V 10A RWS50B-5 14A RWS100B-5 21A RWS150B-5 50A RWS300B-5 100A RWS600B-5
12V 4.3A RWS50B-12 8.5A RWS100B-12 13A RWS150B-12 25A RWS300B-12 50A RWS600B-12
15V — — — — — — 20A RWS300B-15 40A RWS600B-15
24V 2.2A RWS50B-24 4.5A RWS100B-24 6.5A RWS150B-24 12.5A RWS300B-24 25A RWS600B-24
36V — — — — — — 8.4A RWS300B-36 16.7A RWS600B-36
48V 1.1A RWS50B-48 2.1A RWS100B-48 3.3A RWS150B-48 6.3A RWS300B-48 12.5A RWS600B-48
This means that, in conformity with EU Directive 2011/65/EU,
lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not
been used, except for exempted applications.
■
Conformity to RoHS Directive
■ Product Line up
RWS 100 B - 24 / □
■ Model naming method
Series name
Output power Output Voltage
Option
Blank: Standard
/R: With remote ON/OFF control model.
(Option of RWS300B, RWS600B)
/FO: With remote sensing
Low output voltage (LV) signal
Parallel Operation
(Option of RWS600B)
/RFO: With remote sensing, remote ON/OFF control
Low output voltage (LV) signal
Parallel Operation
(Option of RWS600B)
/DIN: DIN rail mountable
(Option of RWS50B, RWS100B, RWS150B)
■ Applications
RWS-B SERIES
5
UL60950-1/
CSAC22.2
No.60950-1
UL508/CSAC22.2
No.107.1-01
Y
E
A
R
S
warranty
EN60950-1
計 測 F A 半導体
COMP COM MEASURE SEMI F A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_2
UNIT
・
PC Board
RWS50B Specifications (Read instruction manual carefully, before using the power supply unit.)
MODEL
ITEMS/UNITS RWS50B-5 RWS50B-12 RWS50B-24 RWS50B-48
Input
Input Voltage Range (*2)(*12) V AC85 - 265 (47 - 63Hz) or DC120 - 370
Efficiency(100VAC) (typ) (*1) % 77 82 86 86
Efficiency(200VAC) (typ) (*1) % 79 84 87 88
Input Current (100/200VAC) (typ) (*1) A 1.1/0.7
Inrush Current (100/200VAC) (typ) (*1)(*3) A 18/36, (Ta = 25℃, Cold Start)
Leakage Current (*10) mA Less than 0.75
Output
Nominal Output Voltage VDC 5 12 24 48
Maximum Output Current A 10 4.3 2.2 1.1
Maximum Output Power W 50 51.6 52.8 52.8
Maximum Line Regulation (*6)(*12) mV 20 48 96 192
Maximum Load Regulation (*7)(*12) mV 40 96 192 384
Temperature Coefficient Less than 0.02% /℃
Maximum Ripple & Noise(0 ≦Ta ≦70℃) (*4)(*5) mV 120 150 150 200
Maximum Ripple & Noise(-20 ≦Ta<0℃) (*4)(*5) mV 160 180 180 300
Hold-up Time (typ) (*12) ms 15
(100VAC, 100% load)
, 20
(100VAC, 70% load)
Output Voltage Range VDC 4.50 - 5.75 10.8 - 13.8 21.6 - 27.6 43.2 - 52.8
Function
Over Current Protection (*8) A 10.50 - 4.52 - 2.31 - 1.16 -
Over Voltage Protection (*9) V 6.0 - 7.0 14.4 - 16.8 28.8 - 33.6 55.2 - 64.8
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*11)(*12) ℃–20 to +70 (–20℃:50%, –10 to +45℃:100%, +70℃:20%)
Storage Temperature ℃–30 to +75
Operating Humidity ％RH 30 - 90 (No Condensing)
Storage Humidity ％RH 10 - 90 (No Condensing)
Vibration At no operating,10-55Hz (Sweep for 1min), 19.6m/s2 Constant, X,Y,Z 1hour each.
Shock Less than 196.1m/s2
Cooling Convection Cooling
Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA)for 1min
Isolation Resistance More than 100M Ω (Output - FG: 500VDC, 25℃ , 70%RH)
Standards
Safety
Approved by UL60950-1, EN60950-1, UL508 (5V,12V,24V), CSA60950-1,
CSA C22.2 No.107.1-01. (5V,12V,24V) ,
Designed to meet Den-an Appendix 8 at 100VAC only.
Conducted Emission, Radiated Emission (*13) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity (*13) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11
Mechanical
Weight (typ) g 230
Size (W x H x D) mm 34 x 82 x 81.5 (Refer to Outline Drawing)
(*1) At 100VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50-60Hz).
(*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms.
(*4) Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage.
(*5) For start up at low ambient temperature and low input voltage, output ripple noise might not meet
specification.However, specification can be met after one second.
(*6) 85 - 265VAC, constant load.
(*7) No load-Full load, constant input voltage.
(*8) Hiccup with automatic recovery.
Avoid to operate at over load or short circuit condition.
(*9) OVP circuit will shut down output, manual reset (Re power on).
(*10) Measured by the each measuring method of UL, CSA, EN, and Den-an(at 60Hz), Ta=25°C.
(*11) Output Derating
- Derating at standard mounting. Refer to LOAD vs. AMBIENT TEMPERATURE.
- Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
(*12) Output derating needed when input voltage less than 100VAC. Refer to LOAD vs. INPUT VOLTAGE.
(*13) The power supply is considered a component which will be installed into a final equipment.
The final equipment should be re-evaluated that it meets EMC directives.
C1
+V
– V
150mm
C2
MeasuringPointfor
VoandLine/LoadRegulation.
Measure by JEITA probe.
Bandwidth of Oscilloscope : 100MHz
Measuring Point for Ripple & Noise.
Load
A
C1 : Film Cap. 0.1µF
C2 : Elect. Cap.100µF
Fig.A: Characteristics measurement circuit
RWS50B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_3
UNIT
・
PC Board
Outline Drawing
Output Derating
【RWS50B】
+V -V L
V.ADJ N
OUTPUT : 5 V 10 A
H
Max. surrounding air temperature : 70°C / Use wires rating at least 75°C / Pollution Degree : 2 BARCODE
5.0mm
RWS50B-5
571±0.5
82±1
2-M3 TAPPED HOLES (BACK SIDE)
SCREW PENETRATION
DEPTH MAX. 6mm
NAME PLATE(2) 81.5±1
(11.7)
(15.6)
(13.5) 10 8.6
(67.9)
34±1
VOLTAGE ADJUSTMENT
5-M3.5
NAME PLATE(1)
2-M3 TAPPED HOLES
SCREW PENETRATION
DEPTH MAX. 6mm
20 MAX 6.5 48±0.5
16 69±0.5
7
LED
5MAX
● LOAD vs. AMBIENT TEMPERATURE ● LOAD vs. INPUT VOLTAGE
[unit: mm]
–20 –10 0 10 20 30 40 50 60 70 80
120
100
80
60
40
20
0
LOAD (%)
Ta (°C)
MOUNTING (A)
MOUNTING (B), (C), (D)
120
100
80
60
40
20
0
LOAD (%)
85 115 145 175 205 235 265
100
Input Voltage (VAC)
RWS50B
MOUNTING A MOUNTING B MOUNTING C MOUNTING D DON'T USE DON'T USE
STANDARD MOUNTING)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_4
UNIT
・
PC Board
RWS100B Specifications (Read instruction manual carefully, before using the power supply unit.)
MODEL
ITEMS/UNITS RWS100B-5 RWS100B-12 RWS100B-24 RWS100B-48
Input
Input Voltage Range (*2)(*11) V AC85 - 265 (47 - 63Hz) or DC120 - 370
Power factor (100/200VAC) (typ) (*1)(*11) 0.95/0.90
Efficiency(100VAC) (typ) (*1)(*11) % 77 82 85 85
Efficiency(200VAC) (typ) (*1)(*11) % 79 84 87 87
Input Current (100/200VAC) (typ) (*1)(*11) A 1.0/0.5 1.3/0.7
Inrush Current (100/200VAC) (typ) (*1)(*3)(*11) A 15/30, (Ta = 25℃, Cold Start)
Leakage Current (*9) mA Less than 0.75
Output
Nominal Output Voltage VDC 5 12 24 48
Maximum Output Current A 14 8.5 4.5 2.1
Maximum Output Power W 70 102 108 100.8
Maximum Line Regulation (*5)(*11) mV 20 48 96 192
Maximum Load Regulation (*6)(*11) mV 40 96 192 384
Temperature Coefficient Less than 0.02% /℃
Maximum Ripple & Noise(0 ≦Ta ≦70℃) (*4) mV 120 150 150 200
Maximum Ripple & Noise(-20 ≦Ta<0℃) (*4) mV 160 180 180 300
Hold-up Time (typ) (*12) ms 20
Output Voltage Range VDC 4.50 - 5.75 10.8 - 13.8 21.6 - 27.6 43.2 - 52.8
Function
Over Current Protection (*7) A 14.7 - 8.93 - 4.73 - 2.21 -
Over Voltage Protection (*8) V 6.0 - 7.0 14.4 - 16.8 28.8 - 33.6 55.2 - 64.8
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*10)(*11) ℃–20 to +70 (–20℃: 50%, –10 to +40℃:100%, +70℃:20%)
Storage Temperature ℃–30 to +75
Operating Humidity ％RH 30 - 90 (No Condensing)
Storage Humidity ％RH 10 - 90 (No Condensing)
Vibration At no operating,10-55Hz (Sweep for 1min), 19.6m/s2 Constant, X,Y,Z 1hour each.
Shock Less than 196.1m/s2
Cooling Convection Cooling
Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA)for 1min
Isolation Resistance More than 100M Ω (Output - FG: 500VDC, 25℃ , 70%RH)
Standards
Safety
Approved by UL60950-1, EN60950-1, UL508 (5V,12V,24V), CSA60950-1,
CSA C22.2 No.107.1-01. (5V,12V,24V) ,
Designed to meet Den-an Appendix 8 at 100VAC only.
PFHC Designed to meet IEC61000-3-2
Conducted Emission, Radiated Emission (*13) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity (*13) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11
Mechanical
Weight (typ) g 400
Size (W x H x D) mm 39 x 94 x 108 (Refer to Outline Drawing)
(*1) At 100VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50-60Hz).
(*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms.
(*4) Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage.
(*5) 85 - 265VAC, constant load.
(*6) No load-Full load, constant input voltage.
(*7) 5V - 12V model: Constant current limit and hiccup with automatic recovery.
24V - 48V model: Constant current limit with automatic recovery.
Avoid to operate at over load or short circuit condition.
(*8) OVP circuit will shut down output, manual reset (Re power on).
(*9) Measured by the each measuring method of UL, CSA, EN, and Den-an(at 60Hz), Ta=25°C.
(*10) Output Derating
- Derating at standard mounting. Refer to LOAD vs. AMBIENT TEMPERATURE.
- Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
(*11) Output derating needed when input voltage less than 110VAC. Refer to LOAD vs. INPUT VOLTAGE
(*12) At 110VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*13) The power supply is considered a component which will be installed into a final equipment.
The final equipment should be re-evaluated that it meets EMC directives.
C1
+V
– V
150mm
C2
MeasuringPointfor
VoandLine/LoadRegulation.
Measure by JEITA probe.
Bandwidth of Oscilloscope : 100MHz
Measuring Point for Ripple & Noise.
Load
A
C1 : Film Cap. 0.1µF
C2 : Elect. Cap.100µF
Fig.A: Characteristics measurement circuit
RWS100B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_5
UNIT
・
PC Board
Outline Drawing
Output Derating
【RWS100B】
NAME PLATE(1)
NAME PLATE(2)
2-M3 TAPPED HOLES
SCREW PENETRATION
DEPTH MAX. 6mm
2-M3 TAPPED HOLES (BACK SIDE)
SCREW PENETRATION
DEPTH MAX. 6mm
+V -V L
V.ADJ N
H
RWS100B-5
OUTPUT
Max. surrounding air temperature : 70°C / Use wires rating at least 75°C / Pollution Degree : 2
5 V 14 A
(11.7)VOLTAGE ADJUSTMENT
5-M3.5
(15.6)
39±1
(78.5)
(22) 8.6
108±1
94±1
80±0.5
95±0.5
6.5
5MAX
7
20MAX 6.5 95±0.5
21.5
LED
10
● LOAD vs. AMBIENT TEMPERATURE ● LOAD vs. INPUT VOLTAGE
[unit: mm]
–20 –10 0 10 20 30 40 50 60 70 80
Ta (°C)
120
100
80
60
40
20
0
LOAD (%)
MOUNTING (A)
MOUNTING (B), (C), (D)
85 115 145 175 205 235 265
110
90
100
120
100
80
60
40
20
0
LOAD (%)
Input Voltage (VAC)
12V-48V
5V
9290
RWS100B
MOUNTING A MOUNTING B MOUNTING C MOUNTING D DON'T USE DON'T USE
STANDARD MOUNTING)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_6
UNIT
・
PC Board
RWS150B Specifications (Read instruction manual carefully, before using the power supply unit.)
MODEL
ITEMS/UNITS RWS150B-5 RWS150B-12 RWS150B-24 RWS150B-48
Input
Input Voltage Range (*2)(*11) V AC85 - 265 (47 - 63Hz) or DC120 - 370
Power factor (100/200VAC) (typ) (*1)(*11) 0.95/0.90
Efficiency(100VAC) (typ) (*1)(*11) % 77 84 86 86
Efficiency(200VAC) (typ) (*1)(*11) % 79 87 89 89
Input Current (100/200VAC) (typ) (*1)(*11) A 1.5/0.8 1.9/1.0
Inrush Current (100/200VAC) (typ) (*1)(*3)(*11) A 16/32, (Ta = 25℃, Cold Start)
Leakage Current (*9) mA Less than 0.75
Output
Nominal Output Voltage VDC 5 12 24 48
Maximum Output Current A 21 13 6.5 3.3
Maximum Output Power W 105 156 156 158.4
Maximum Line Regulation (*5)(*11) mV 20 48 96 192
Maximum Load Regulation (*6)(*11) mV 40 96 192 384
Temperature Coefficient Less than 0.02% / °C
Maximum Ripple & Noise(0 ≦Ta ≦70℃) (*4) mV 120 150 150 200
Maximum Ripple & Noise(-20 ≦Ta<0℃) (*4) mV 160 180 180 300
Hold-up Time (typ) (*12) ms 20
Output Voltage Range VDC 4.50 - 5.75 10.8 - 13.8 21.6 - 27.6 43.2 - 52.8
Function
Over Current Protection (*7) A 22.05 - 13.65 - 6.83 - 3.47 -
Over Voltage Protection (*8) V 6.0 - 7.0 14.4 - 16.8 28.8 - 33.6 55.2 - 64.8
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*10)(*11) ℃–20 to +70 (–20℃: 50%, –10 to +40℃:100%, +70℃:20%)
Storage Temperature ℃–30 to +75
Operating Humidity ％RH 30 - 90 (No Condensing)
Storage Humidity ％RH 10 - 90 (No Condensing)
Vibration At no operating,10-55Hz (Sweep for 1min), 19.6m/s2 Constant, X,Y,Z 1hour each.
Shock Less than 196.1m/s2
Cooling Convection Cooling
Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA)for 1min
Isolation Resistance More than 100M Ω (Output - FG: 500VDC, 25℃ , 70%RH)
Standards
Safety
Approved by UL60950-1, UL508 (5V,12V,24V), CSA60950-1,
CSA C22.2 No.107.1-01. (5V,12V,24V) ,
Designed to meet Den-an Appendix 8 at 100VAC only.
PFHC Designed to meet IEC61000-3-2
Conducted Emission, Radiated Emission (*13) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity (*13) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11
Mechanical
Weight (typ) g 480
Size (W x H x D) mm 41 x 94 x 128 (Refer to Outline Drawing)
(*1) At 100VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50-60Hz).
(*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms.
(*4) Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage.
(*5) 85 - 265VAC, constant load.
(*6) No load-Full load, constant input voltage.
(*7) 5V - 12V model: Constant current limit and hiccup with automatic recovery.
24V - 48V model: Constant current limit with automatic recovery.
Avoid to operate at over load or short circuit condition.
(*8) OVP circuit will shut down output, manual reset (Re power on).
(*9) Measured by the each measuring method of UL, CSA, EN, and Den-an(at 60Hz), Ta=25°C.
(*10)Output Derating
- Derating at standard mounting. Refer to LOAD vs. AMBIENT TEMPERATURE.
- Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
(*11) Output derating needed when input voltage less than 110VAC. Refer to LOAD vs. INPUT VOLTAGE
(*12) At 110VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*13) The power supply is considered a component which will be installed into a final equipment.
The final equipment should be re-evaluated that it meets EMC directives.
C1
+V
– V
150mm
C2
MeasuringPointfor
VoandLine/LoadRegulation.
Measure by JEITA probe.
Bandwidth of Oscilloscope : 100MHz
Measuring Point for Ripple & Noise.
Load
A
C1 : Film Cap. 0.1µF
C2 : Elect. Cap.100µF
Fig.A: Characteristics measurement circuit
RWS150B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_7
UNIT
・
PC Board
Outline Drawing
Output Derating
【RWS150B】
+V -V L
V.ADJ N
H
RWS150B-5
OUTPUT
Max. surrounding air temperature : 70°C / Use wires rating at least 75°C / Pollution Degree : 2
5 V 21 A
(74.5)
(23) 8.6
VOLTAGE
ADJUSTMENT
5-M3.5
5118±0.5
5MAX
94±1
128±1
14 109±0.5
26.5
41±1
(15.6)
20MAX
LED
18 69±0.5
(11.7)
10
NAME PLATE(1)
NAME PLATE(2)
2-M3 TAPPED HOLES
SCREW PENETRATION
DEPTH MAX. 6mm
2-M3 TAPPED HOLES (BACK SIDE)
SCREW PENETRATION
DEPTH MAX. 6mm
● LOAD vs. AMBIENT TEMPERATURE ● LOAD vs. INPUT VOLTAGE
[unit: mm]
–20 –10 0 10 20 30 40 50 60 70 80
Ta (°C)
120
100
80
60
40
20
0
LOAD
(%)
MOUNTING(A)
MOUNTING(B),(C),(D)
110
90
100
9290
85 115 145 175 205 235 265
120
100
80
60
40
20
0
LOAD (%)
Input Voltage (VAC)
12V-48V
5V
RWS150B
MOUNTING A MOUNTING B MOUNTING C MOUNTING D DON'T USE DON'T USE
STANDARD MOUNTING)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_8
UNIT
・
PC Board
RWS300B Specifications (Read instruction manual carefully, before using the power supply unit.)
MODEL
ITEMS/UNITS
RWS300B-5 RWS300B-12 RWS300B-15 RWS300B-24 RWS300B-36 RWS300B-48
Input
Input Voltage Range (*2)(*11) V AC85 - 265 (47 - 63Hz) or DC120 - 370
Power factor (100/200VAC) (typ) (*1)(*11) 0.95/0.90
Efficiency(100VAC) (typ) (*1)(*11) % 75 79 81 85 85 85
Efficiency(200VAC) (typ) (*1)(*11) % 78 82 84 88 88 88
Input Current (100/200VAC) (typ) (*1)(*11) A 3.3/1.8 3.8/2.1
Inrush Current (100/200VAC) (typ)
(*1)(*3)(*11) A 17/34, (Ta = 25℃, Cold Start)
Leakage Current (*9) mA Less than 0.75
Output
Nominal Output Voltage VDC 5 12 15 24 36 48
Maximum Output Current A 50 25 20 12.5 8.4 6.3
Maximum Output Power W 250 300 300 300 302.4 302.4
Maximum Line Regulation (*5)(*11) mV 20 48 60 96 144 192
Maximum Load Regulation (*6)(*11) mV 40 96 120 192 288 384
Temperature Coefficient Less than 0.02% /℃
Maximum Ripple & Noise(0 ≦Ta ≦70℃) (*4) mV 120 150 150 150 200 200
Maximum Ripple & Noise(-20 ≦Ta<0℃) (*4) mV 160 180 180 180 240 500
Hold-up Time (typ) (*12) ms 20
Output Voltage Range V 4.50 - 5.75 10.8 - 13.8 13.5 - 17.2 21.6 - 27.6 32.4 - 41.4 43.2 - 52.8
Function
Over Current Protection (*7) A 52.50 - 26.25 - 21.00 - 13.13 - 8.82 - 6.62 -
Over Voltage Protection (*8) V 6.0 - 7.0 14.4 - 16.8 18.0 - 21.0 28.8 - 33.6 43.2 - 50.4 55.2 - 64.8
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*10)(*11) ℃–20 to +70 (–20℃: 50%, –10 to +50℃:100%, +70℃:20%)
Storage Temperature ℃–30 to +75
Operating Humidity ％RH 30 - 90 (No Condensing)
Storage Humidity ％RH 10 - 90 (No Condensing)
Vibration At no operating,10-55Hz (Sweep for 1min), 19.6m/s2 Constant, X,Y,Z 1hour each.
Shock Less than 196.1m/s2
Cooling Forced air by blower fan
Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA)for 1min
Isolation Resistance More than 100M Ω (Output - FG: 500VDC, 25℃ , 70%RH)
Standards
Safety
Approved by UL60950-1, UL508 (24V only), CSA60950-1,
CSA C22.2 No.107.1-01. (24V only) ,
Designed to meet Den-an Appendix 8 at 100VAC only.
PFHC Designed to meet IEC61000-3-2
Conducted Emission, Radiated Emission (*13) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity (*13) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11
Mechanical
Weight (typ) g 900
Size (W x H x D) mm 41 x 102 x 170 (Refer to Outline Drawing)
Standard price (tax separate)yen 14,160
(*1) At 100VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50-60Hz).
(*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms.
(*4) Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage.
(*5) 85 - 265VAC, constant load.
(*6) No load-Full load, constant input voltage.
(*7) 5V - 12V model: Constant current limit and hiccup with automatic recovery.
24V - 48V model: Constant current limit with automatic recovery.
Avoid to operate at over load or short circuit condition.
(*8) OVP circuit will shut down output, manual reset (Re power on).
(*9) Measured by the each measuring method of UL, CSA, EN, and Den-an(at 60Hz), Ta=25°C.
(*10) Output Derating
- Derating at standard mounting. Refer to LOAD vs. AMBIENT TEMPERATURE.
- Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
(*11) Output derating needed when input voltage less than 110VAC. Refer to LOAD vs. INPUT VOLTAGE
(*12) At 110VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*13) The power supply is considered a component which will be installed into a final equipment.
The final equipment should be re-evaluated that it meets EMC directives.
C1
+V
– V
150mm
C2
MeasuringPointfor
VoandLine/LoadRegulation.
Measure by JEITA probe.
Bandwidth of Oscilloscope : 100MHz
Measuring Point for Ripple & Noise.
Load
A
C1 : Film Cap. 0.1µF
C2 : Elect. Cap.100µF
Fig.A: Characteristics measurement circuit
RWS300B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_9
UNIT
・
PC Board
Outline Drawing
Output Derating
【RWS300B】
6157.5±0.5
18.5 77±0.5
102±1
170±1
20 116±0.5 20MAX
19
VOLTAGE
ADJUSTMENT
9±0.5
41±1
(15.1)
(12.5) 10 8.6
(93.3)
(11.2)
Air flow
LED
7-M3.5
(80.9)
(40)
5MAX
NAME
PLATE(1)
NAME
PLATE(2)
2-M3 TAPPED HOLES
SCREW PENETRATION
DEPTH MAX. 6mm
2-M3 TAPPED HOLES (BACK SIDE)
SCREW PENETRATION
DEPTH MAX. 6mm
+V -V L
V.ADJ N-V+V
H
RWS300B-5
OUTPUT
Max. surrounding air temperature : 70°C / Use wire rating at least 75°C / Pollution Degree : 2
5 V 50 A
● LOAD vs. AMBIENT TEMPERATURE ● LOAD vs. INPUT VOLTAGE
[unit: mm]
–20 –10 0 10 20 30 40 50 60 70 80
Ta (°C)
120
100
80
60
40
20
0
LOAD (%)
MOUNTING (A)-(D)
120
100
80
92
60
40
20
0
LOAD (%)
MOUNTING (A)-(D)
85 115 145 175 205 235 265
110100
Input Voltage (VAC)
RWS300B
MOUNTING A MOUNTING B MOUNTING C MOUNTING D DON'T USE DON'T USE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_10
UNIT
・
PC Board
RWS600B Specifications (Read instruction manual carefully, before using the power supply unit.)
RWS600B
MODEL
ITEMS/UNITS
RWS600B-5 RWS600B-12 RWS600B-15 RWS600B-24 RWS600B-36 RWS600B-48
Input
Input Voltage Range (*2)(*11) V AC85 - 265 (47 - 63Hz) or DC120 - 330
Power factor (100/200VAC) (typ) (*1)(*11) 0.95/0.90
Efficiency(100VAC) (typ) (*1)(*11) % 74 81 81 84 85 85
Efficiency(200VAC) (typ) (*1)(*11) % 77 84 84 88 88 88
Input Current (100/200VAC) (typ) (*1)(*11) A 6.5/3.6 7.2/4.0
Inrush Current (100/200VAC) (typ)
(*1)(*3)(*11) A 20/40 (Ta = 25℃)
Leakage Current (*9) mA Less than 0.75
Output
Nominal Output Voltage VDC 5 12 15 24 36 48
Maximum Output Current A 100 50 40 25.0 16.7 12.5
Maximum Output Power W 500 600 600 600 601.2 600
Maximum Line Regulation (*5)(*11) mV 20 48 60 96 144 192
Maximum Load Regulation (*6)(*11) mV 40 96 120 192 288 384
Temperature Coefficient Less than 0.02% /℃
Maximum Ripple & Noise(0 ≦Ta ≦70℃) (*4) mV 120 150 150 150 200 200
Maximum Ripple & Noise(-20 ≦Ta<0℃) (*4) mV 160 180 180 180 240 500
Hold-up Time (typ) (*12) ms 20
Output Voltage Range V 4.50 - 5.75 10.8 - 13.8 13.5 - 17.2 21.6 - 27.6 32.4 - 41.4 43.2 - 52.8
Function
Over Current Protection (*7) A 105.0 - 52.5 - 42.0 - 26.3 - 17.5 - 13.1 -
Over Voltage Protection (*8) V 6.0 - 7.0 14.4 - 16.8 18.0 - 21.0 28.8 - 33.6 43.2 - 50.4 55.2 - 64.8
Remote ON/OFF Option
Parallel Operation Option
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*10)(*11) ℃–20 to +70 (–20 to +50℃:100%, +70℃:20%)
Storage Temperature ℃–30 to +75
Operating Humidity ％RH 30 - 90 (No Condensing)
Storage Humidity ％RH 10 - 90 (No Condensing)
Cooling Forced air by blower fan
Vibration At no operating,10-55Hz (Sweep for 1min), 19.6m/s2 Constant, X,Y,Z 1hour each.
Shock Less than 196.1m/s2
Isolation Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA)for 1min
Isolation Resistance More than 100M Ω (Output - FG: 500VDC, 25℃ , 70%RH)
Standards
Safety Approved by UL60950-1, EN60950-1, UL508 (24V model only), CSA60950-1
Designed to meet Den-an Appendix 8 at 100VAC only.
PFHC Designed to meet IEC61000-3-2
Conducted Emission, Radiated Emission (*14) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Radiated Emission (*13)(*14) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity (*14) Designed to meet IEC61000-6-2 IEC61000-4-2, -3, -4, -5, -6, -8, -11
Mechanical
Weight (typ) g 1600
Size (W x H x D) mm 61 x 120 x 190 (Refer to Outline Drawing)
(*1) At 100VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50-60Hz).
(*3) Not applicable for the inrush current to Noise Filter for less than 0.2ms.
(*4) Please refer to Fig. A for measurement of Vo, line & load regulation and ripple voltage.
(*5) 85 - 265VAC, constant load.
(*6) No load-Full load, constant input voltage.
(*7) 5V - 12V model: Constant current limit and hiccup with automatic recovery.
24V - 48V model: Constant current limit with automatic recovery.
Avoid to operate at over load or short circuit condition.
(*8) OVP circuit will shut down output, manual reset (Re power on).
(*9) Measured by the each measuring method of UL, CSA, EN, and Den-an(at 60Hz), Ta=25°C.
(*10) Output Derating
- Derating at standard mounting. Refer to LOAD vs. AMBIENT TEMPERATURE.
- Load (%) is percent of maximum output power or maximum output current, do not exceed its derating of maximum load.
(*11) Output derating needed when input voltage less than 110VAC. Refer to LOAD vs. INPUT VOLTAGE
(*12) At 110VAC/200VAC, Ta=25°C, nominal output voltage and maximum output power.
(*13) Clamp lter to the input line (TDK ZCAT3035-1330) use.
(*14) The power supply is considered a component which will be installed into a final equipment.
The final equipment should be re-evaluated that it meets EMC directives.
C1
+V
– V
150mm
C2
MeasuringPointfor
VoandLine/LoadRegulation.
Measure by JEITA probe.
Bandwidth of Oscilloscope : 100MHz
Measuring Point for Ripple & Noise.
Load
A
C1 : Film Cap. 0.1µF
C2 : Elect. Cap.100µF
Fig.A: Characteristics measurement circuit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_11
UNIT
・
PC Board
Outline Drawing
Output Derating
【RWS600B】
BAR CODE
5 V 100 AOUTPUT :
+V+V -V -V
V.ADJ LN
RWS600B-5
H
Max. surrounding air temperature : 70°C Use wires rating at least 75°C Pollution Degree : 2
120±1
100±0.5
190±1
37
Air flow
30
21MAX 37 140±0.5
10 35±0.5
61±1
147±0.5
26MAX
3MAX
140±0.5
7
(11.2)
(18.6)
(110.7)
(46.8) 16 17.5 16
(10.2) 10 10
(15.1)
3-M3.5
LED
4-M5
5MAX
(60)
(75)
NAME PLATE(1)
NAME PLATE(2)
2-M3 TAPPED HOLES
SCREW PENETRATION
DEPTH MAX. 6mm
VOLTAGE
ADJUSTMENT
2-M3 TAPPED HOLES (BACK SIDE)
SCREW PENETRATION
DEPTH MAX. 6mm
● LOAD vs. AMBIENT TEMPERATURE ● LOAD vs. INPUT VOLTAGE
[unit: mm]
–20 –10 0 10 20 30 40 50 60 70 80
120
100
80
60
40
20
0
LOAD (%)
Ta (°C)
MOUNTING (A)-(D)
MOUNTING A MOUNTING B MOUNTING C MOUNTING D DON'T USE DON'T USE
120
100
80
92
60
40
20
0
LOAD (%)
MOUNTING (A)-(D)
85 115 145 175 205 235 265
110100
Input Voltage (VAC)
RWS600B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_12
UNIT
・
PC Board
Block Diagram
【RWS50B】
【RWS100B】
Inrush
Current Limit
Circuit
L
N
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
+V
Output
Output
Sensing
-V
Input
85䡚265VAC
Fuse rating 3.15A
Flyback topology 100kHz
Circuit topology 䞉Switching frequency
Line Filter
Rectifier
Filter
Switching Circuit
Rectifier & Filter
Control
Circuit
Photo-
Coupler
L
N
Input
85䡚265VAC
+V
Output
-V
Single-ended forward topology 120kHz
PFHC circuit : Active filter 65kHz (fixed)
Line Filter
Rectifier
Inrush Current Limit
Circuit
PFHC Circuit
Filter
Switching Circuit
Control
Circuit
Control
Circuit
Rectifier & Filter
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
Output
Sensing
Photo-
Coupler
Fuse rating 3.15A
Circuit topology 䞉Switching frequency
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_13
UNIT
・
PC Board
Block Diagram
【RWS150B】
【RWS300B, RWS300B/R】
L
N
Input
85䡚265VAC
+V
Output
-V
Line Filter
Rectifier
Inrush Current Limit
Circuit
PFHC Circuit
Filter
Switching Circuit
Rectifier & Filter
Control
Circuit
Control
Circuit
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
Output
Sensing
Photo-
Coupler
Fuse rating 5A
Single-ended forward topology 120kHz
PFHC circuit : Active filter 65kHz (fixed)
Circuit topology 䞉Switching frequency
L
N
Input
85䡚265VAC
+V
-V
Fan
+R
-R
*Optional ”/R”
Remote ON/OFF
Control
Output
Line Filter
Rectifier
PFHC Circuit
Inrush Current Limit
Circuit
Filter
Switching Circuit
Rectifier & Filter
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
Output
Sensing
Photo-
Coupler
Photo-
Coupler
Fuse rating 10A
Single-ended forward topology 120kHz
PFHC circuit : Active filter 65kHz (fixed)
Circuit topology 䞉Switching frequency
Control
Circuit
Control
Circuit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_14
UNIT
・
PC Board
Block Diagram
【RWS600B, RWS600B/R】
【RWS600B/FO, RWS600B/RFO】
L
N
Input
85䡚265VAC
+V
-V
Fan
+R
-R
*Optional ”/R”
Remote ON/OFF
Control
Output
Line Filter
Rectifier
PFHC Circuit
Inrush Current Limit
Circuit
Filter
Switching Circuit
Rectifier & Filter
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
Output
Sensing
Photo-
Coupler
Photo-
Coupler
Control
Circuit
Control
Circuit
L
N
Input
85䡚265VAC
+V
+S
-S
-V
Fan
+LV
+Vm
-Vm
+P
-P
-LV
Parallel
Operation
Circuit
+R
-R
*Optional ”/RFO”
Output
Fuse rating 15A
Cascade forward topology 190kHz
PFHC circuit : Active filter 50kHz-70kHz (Diffusion)
Circuit topology 䞉Switching frequency
Line Filter
Rectifier
PFHC Circuit
Inrush Current Limit
Circuit
Filter
Switching Circuit
Control
Circuit
Control Circuit
OCP
Circuit
OVP
Circuit
OVP
Sensing
Photo-
Coupler
Photo-
Coupler
Output
Sensing
Photo-
Coupler
Remote ON/OFF
Control
Photo-
Coupler
Rectifier & Filter
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_15
UNIT
・
PC Board
Sequence Time Chart
【RWS50B-RWS150B】
【RWS300B】
【RWS600B】
0V
Vout
0V
(䈜1) OVP Point
5V – 24V : 120% - 140%
48V : 115% - 135%
OVP Point(䈜1)
Input Voltage
Output Voltage
INPUT ON
INPUT OFF
OVP ACT ON
INPUT OFF
INPUT ON
OCP ACT ON
OCP RELEASED
0V
Vout
0V
OVP Point(䈜1)
Remote ON/OFF
Control (䈜2)
+R
-R
Input Voltage
Output Voltage
INPUT ON
REMOTE OFF
REMOTE ON
INPUT OFF
INPUT ON
OVP ACT ON
OCP RELEASED
OCP ACT ON
INPUT OFF
(䈜1) OVP Point
5V – 36V : 120% - 140%
48V : 115% - 135%
(䈜2) +R & -R Level
4.5V or higher : ON
0.5V or less : OFF
(䈜1) OVP Point
5V – 36V : 120% - 140%
48V : 115% - 135%
-LV
Low Output Voltage
Detection Signal
(Open Collector䠅
0V
Vout
0V
OVP Point(䈜1)
LV Signal Point
+R
-R
+LV
Input Voltage
Output Voltage
Remote ON/OFF
Control (䈜2)
INPUT ON
REMOTE OFF
REMOTE ON
INPUT OFF
INPUT ON
OVP ACT ON
OCP RELEASED
OCP ACT ON
INPUT OFF
(䈜2) +R & -R Level
4.5V or higher : ON
0.5V or less : OFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

●This product contains a printed circuit board utilizing surface
mounted devices.
PCB stress such as bending, twisting etc. could cause
damage. Therefore, please handle with care.
●This power supply has possibility that hazardous voltage may
occur in output terminal depending on failure mode.
The output of these products must be protected in the end
use equipment to maintain SELV.
●The output of RWS300B and RWS600B is considered to be
a hazardous energy level (The voltage is 2V or more and the
power is 240VA or more). It must not be made accessible to
users. Protection must be provided for Service Engineers
against indirect contact with the output terminals and/or to
prevent tools being dropped across them. While working on
this product, the AC input power must be switched off and the
input and output voltage should be zero.
●RWS300B, RWS600B have a built-in fan for air-cooling. Do
not block the air intake and exhaust as this might lead to fire.
●The information in this document is subject to change without
prior notice. Please refer to the latest version of the data
sheet, etc., for the most up-to date specifications of the
product.
●No part of this document may be copied or reproduced in any
form without prior written consent of TDK-Lambda.
Note : CE MARKING
CE Marking when applied to a product covered by this
handbook indicates compliance with the low voltage directive
(2006/95/EC) in that it complies with EN60950-1.
・All specifications are subject to change without notice.
RWS-B
a_RWS-B_16
UNIT ・
PC Board
DANGER
Never use this product in locations where flammable gas or
ignitable substances are present. There are risks of igniting
these substances and exploding by an arcing.
WARNING
●Do not touch this product or its internal components while
circuit in operation, or shortly after shutdown. There may
be high voltage or high temperature present and you may
receive an electric shock or burn.
●While this product is operating, keep your hands and face
away from it as you may be injured by an unexpected
situation.
●Do not make unauthorized changes to this product, otherwise
you may receive an electric shock and void your warranty.
●Do not drop or insert anything into this product. It might cause
a failure, fire and electric shock.
●Do not use this product under unusual condition such as
emission of smoke or abnormal smell and sound etc.
It might lead to fire and electric shock. In such cases,
please contact us. Do not attempt repair by yourself, as it is
dangerous for the user.
●Do n ot o pe ra te t he se p ro du c ts i n t he p re se nc e o f
condensation. It might lead fire and electric shock.
CAUTION
●This power supply is designed and manufactured for use
within an end product such that it is accessible to SERVICE
ENGINEERS only.
●Confirm connections to input/output terminals are correct as
indicated in the instruction manual before switching on.
●Input voltage, Output current, Output power, ambient
temperature and ambient humidity should be kept within
specifications, otherwise the product will be damaged.
●Do not operate and store this product in an environment
where condensation might occur. In such case, waterproof
treatment is necessary.
●Do not use this product in environment with a strong
electromagnetic field, corrosive gas or conductive substances.
●For applications, which require very high reliability (Nuclear
related equipment, medical equipment, traffic control
equipment, etc.), it is necessary to provide a fail-safe
mechanism in the end equipment.
●Do not inject abnormal voltages into the output or signal of
this product. The injection of reverse voltage or over voltage
exceeding nominal output voltage into the output or signal
terminals might cause damage to internal components.
●Never operate the product under over current or short-circuit
conditions, or outside its specified Input Voltage Range.
Insulation failure, smoking, burning or other damage may
occur.
BEFORE USING THE POWER SUPPLY UNIT
Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before
using this product. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
RWS-B
RWS-B Instruction Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_17
UNIT ・
PC Board
RWS50B, RRWS100B, RWS150B RWS300B
1. Model name identification method
2. Terminal Explanation
RWS 100 B - 24 / □
Series Name
Output Power
type
Rated Output
Voltage
Option
Blank: Standard
/R: With remote ON/OFF control model.
(Option of RWS300B, RWS600B)
/FO: With remote sensing
Low output voltage (LV) signal
Parallel Operation
(Option of RWS600B)
/RFO: With remote sensing, remote ON/OFF control
Low output voltage (LV) signal
Parallel Operation
(Option of RWS600B)
/DIN: DIN rail mountable
(Option of RWS50B, RWS100B, RWS150B)
H
+V -V L N
⑤
④
③
②
①
⑥
⑧
⑦
+V -V L N-V+V
H
V.ADJ
③
②
①
⑨
⑩
⑪
⑥
④
⑤
①N : Input terminal Neutral line
②L : Input terminal Live line
(Fuse in line)
③: Earth terminal
④–V : –Output terminal
(30A max. / terminal)
⑤+V : +Output terminal
(30A max. / terminal)
⑥Output voltage adjustment trimmer
⑦Output monitoring indicator (Green LED)
(RWS50B, RWS100B)
⑧Output monitoring indicator (Green LED)
(RWS150B)
⑨Output monitoring indicator (Green LED)
(RWS300B)
*All screws size is M3.5
RWS-B
RWS50B, RWS100B, RWS150B, RWS300B
RWS300B/R
⑩-R : Remote ON/OFF control terminal
⑪+R : Remote ON/OFF control terminal
*Remote ON/OFF control Connector (JST)
Connector Housing Terminal Pin
S02B-XASS-1 XAP-02V-1 SXA-001T-P0.6(AWG28 to 24)
or
SXA-01T-P0.6(AWG24 to 20)
Hand Crimping Tool : YRS-692 (SXA-001T-P0.6) (JST) or
YRS-701 (SXA-01T-P0.6 ) (JST)
Use maker recommended crimping tool.
Matching housing and terminal pin are not included in the
product.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_18
UNIT ・
PC Board
RWS600B/FO, RWS600B/RFO
⑧
CN81, CN82 : Remote sensing, LV signal,
Parallel operation setup
Remote ON/OFF control (Only /RFO)
CN81,CN82 Connector pin Configuration and Function
CN81 and CN82 are same pin configuration and function.
They are connected to each other in this power supply unit.
When the pin of CN81 side is shorted, the same function pins of
CN82 side are also shorted.
Please note that the function cannot be separately set with CN81
and CN82.
No. Configuration
Function
9
7
5
3
1
CN81
8
6
4
2
10
9
7
5
3
1
CN82
8
6
4
2
10
1 +Vm Output monitor terminal (+V). Internally
connected to +Output terminal.
( +Vm terminal can not supply load current. )
2 +S Remote sensing terminal for +output.
(For remote sensing function, which
compensates for line drop between power
supply terminals and load terminals. Connect
to +Vm terminal when remote sensing
function unnecessary. )
3 +R Remote ON/OFF control terminal (Only /
RFO). No connection for /FO.
4 –R Remote ON/OFF control terminal (Only /
RFO). No connection for /FO.
5 +LV Low output voltage detection signal (LV signal)
terminal.
(Open collector output. As the output voltage
drops, "LV" signal will be "High".)
6 –LV GND for LV signal.
7 +P Parallel operation setup terminal. (Connect to
-P terminal for parallel operation.)
8 –P Parallel operation setup terminal. (Connect to
+P terminal for parallel operation.)
9 –Vm GND for Output monitor terminal. Internally
connected to -Output terminal.
( -Vm terminal can not supply load current. )
10 -S Remote sensing terminal for -output side.
(For remote sensing function, which
compensates for line drop between power
supply terminals and load terminals. Connect
to -Vm terminal when remote sensing function
unnecessary.)
* CN81, CN82 Connector (JST)
Connector Housing Terminal Pin
S10B-PHDSS PHDR-10VS SPHD-002T-P0.5(AWG28 to 24)or
SPHD-001T-P0.5(AWG26 to 22)
Hand Crimping Tool : YRS-620 (SPHD-002T-P0.5) (JST) or YC-
610R (SPHD-001T-P0.5) (JST)
Use maker recommended crimping tool.
"+Vm" terminal (Pin No.1) to "+S" terminal (Pin No.2), and "-Vm"
terminal (Pin No.9) to "-S" terminal
(Pin No.10) are connected by short pieces at time of shipment.
+V+V -V -V LN
V.ADJ
H
③
②
①
⑦
⑧
⑥
④
⑤
RWS600B
①N : Input terminal Neutral line (M3.5 screw)
②L : Input terminal Live line (Fuse in line) (M3.5 screw)
③: Earth terminal
④–V : –Output terminal
(50A max. / terminal, M5 screw)
⑤+V : +Output terminal
(50A max. / terminal, M5 screw)
⑥Output voltage adjustment trimmer
⑦Output monitoring indicator (Green LED)
RWS-B
RWS600B/R
⑧CN81 : Remote ON/OFF control
No. Configuration Function
9
7
5
3
1
CN81
8
6
4
2
10
1 NC No connection.
2 NC No connection.
3 +R Remote ON/OFF control terminal.
4 -R GND for Remote ON/OFF control
terminal.
5 NC No connection.
6 NC No connection.
7 NC No connection.
8 NC No connection.
9 NC No connection.
10 NC No connection.
* CN81 Connector (JST)
Connector Housing Terminal Pin
S10B-PHDSS PHDR-10VS SPHD-002T-P0.5(AWG28 to 24)or
SPHD-001T-P0.5(AWG26 to 22)
Hand Crimping Tool : YRS-620 (SPHD-002T-P0.5) (JST) or YC-
610R (SPHD-001T-P0.5) (JST)
Use maker recommended crimping tool.
Matching housing and terminal pin are not included in the
product.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

・All specifications are subject to change without notice.
RWS-B
a_RWS-B_19
UNIT ・
PC Board
3. Connecting method
Pay attention to the input wiring. If it is connected to wrong terminal, the power supply will be damaged.
●Input must be off when making connections.
●Connect terminal to earth (frame ground of the equipment etc.) by thick wire for safety and improvement of noise sensitivity.
RWS50B, RWS100B, RWS150B RWS300B RWS600B
+V -V L N
+
–
Load
+V -V L N
-V+V
Load
+
–
+V -V L N-V+V
Load
+
–
Recommended torque : RWS50B to RWS600B M3.5screw 1.0N･m(10.2kgf･cm) to 1.6N･m(16.3kgf･cm)
RWS600B M5screw 2.2N･m(22.4kgf･cm) to 2.8N･m(28.6kgf･cm)
RWS300B/R
・Connect external voltage between " +R" terminal and "-R"
terminal for remote ON/OFF control.
(ON/OFF control lines shall be twisted.)
+V -V L N
-V+V
H
V.ADJ
Load
+
–
RWS600B/R
・Connect external voltage between " +R" terminal (Pin No.3)
and "-R" terminal (Pin No.4) for remote ON/OFF control.
(ON/OFF control lines shall be twisted.)
9
7
5
3
1
CN81
8
6
4
2
10
+V+V -V -V L N
Load
+
–
RWS-B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com