EHUOYAN ER302 User manual
ER302
User Manual
Version 1.1.0
Page 2 of 13
Nov 2014
1. Overview
The ER302 NFC Writer is a PC-linked contactless smart card reader/writer
developed based on the 13.56 MHz Contactless (RFID) Technology. It supports
MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG203 and ISO 14443A
compatible cards.
ER302 use USB port to act as a virtual COM port. The proximity operating distance
of ER302 is up to 10 cm, depending on the type of contactless tag in use.
The ER302 is ideal for secure personal identity verification, access control,
e-payment, e-ticketing for events and mass transit, toll road fare collection and
network authentication.
2. Special Features
Support card: MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG203
RF Frequency: 13.56 MHz.
Typical time of command：<100ms
Operating distance: up to 10 cm
Communications Interface: USB
Two LED indicators (software controlled)
Buzzer alarm (software controlled)
Mechanic characteristics:
- Size: 120 ×80×16 (mm)
- Cable length: 1.5m
- Weight: 100g (include USB cable)
3. Technical Specifications
ER302
User Manual
Version 1.1.0
Page 3 of 13
Nov 2014
Dimensions
120 mm (L) x 80 mm (W) x 16 mm (H)
Weight
100 g (including USB cable)
Cable length
1.5m
Color
white
Interface
USB (VCP)
Baud rate
115200 bps (default)
Operating Distance
Up to 10 cm (depends on the tag type)
Supply Voltage
5V DC (USB power)
Supply Current
42mA (operating); 22mA (close port); 60mA (maximum)
Operating Temperature
-10~50 °C
Storage Temperature
-20~70 °C
Operating Frequency
13.56 MHz
RF Speed
212 kbps
Smart Card Supported
MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG203
Operating System
Win NT, Win 2k, Win XP, Win Vista, Win 7, Win 8, Linux
4. Typical Applications
E-Payment
E-Healthcare
E-Game
E-Government
E-Ticketing
Access Control
ER302
User Manual
Version 1.1.0
Page 4 of 13
Nov 2014
Network Login
Transportation
Loyalty Program
5. How to use
Step1: Open the folder “USB_Driver_Windows”, then you will find two installer
programs shown as below.
If the user’s OS is windows 32 bits, then click “CP210xVCPInstaller_x86.exe”to
install the driver, else if 64 bits, then click “CP210xVCPInstaller_x64.exe” to install
the USB driver. (Note: if you have installed the driver before, then go to step2).
Step2: On the next picture, please click “next step”.
ER302
User Manual
Version 1.1.0
Page 5 of 13
Nov 2014
Step3: On the next picture, select “I accept this agreement”, next click “next step”.
ER302
User Manual
Version 1.1.0
Page 6 of 13
Nov 2014
Step4: On the next picture, click “Finish”, then the USB driver install fully.
Step5: Connect the ER302 to the USB port of PC, shown as below.
After power on the RED led will flash one time, then the buzzer will beep one time,
at last the blue led will light on, it means that the reader is ready now. You can
ER302
User Manual
Version 1.1.0
Page 7 of 13
Nov 2014
send the commands from the host to the ER302.
After connect the USB, you can see the Virtual Com Port (VCP) on the “Device
Manager”.
How to find out which communications port the operating system has assigned to
the USB driver?
Windows XP---
The path is:
Start=>Control Panel=>System(you might need to set your Control Panel to
‘Classic View’)=>Hardware=>Device Manager=>Ports(COM & LPT)
Vista and Windows 7---
The path is:
Start=>Control Panel=>Device Manager(you might need to set your Control Panel
to ‘Classic View’)=>Ports(COM & LPT)
ER302
User Manual
Version 1.1.0
Page 8 of 13
Nov 2014
Note: If the COMX exceed COM10, please change it between 1 to 9, for example, it
shows COM12, then you can change it into COM3.
HOW TO CHANGE COM PORT NUMBER?
If you need to change the port number assigned to your USB driver, proceed to
next step to change the USB driver port number in the Device Manager.
1) Right click on the selected COM port and select “Properties”.
ER302
User Manual
Version 1.1.0
Page 9 of 13
Nov 2014
2) Open the “Port settings”tab and select “Advenced”.
ER302
User Manual
Version 1.1.0
Page 10 of 13
Nov 2014
3) In the “Advanced Settings” window, activate the drop-down for “COM Port
Number”you will be presented with a list of ports. Click on an unused port to
change the COM port for your USB driver. Click “OK”to close the “Advanced
Settings”, then the “Properties Windows”. Close the “Device Manager”
windows then RECONNECT the USB and re-open the “Device Manager”,
your USB driver should now be assigned to the new port.
Note: Even if the COM port shown “in used”, but in fact there is no such a
device connecting to your PC, then you can select it.
ER302
User Manual
Version 1.1.0
Page 11 of 13
Nov 2014
Step6: Now, you can run the program to send commands to the ER302. You can
run the eReader.exe or else App(base on the dll files) to communicate with the
ER302. The ER302 will not do anything unless you send command to it. There is
only one program can be run and connect to the ER302 at the same time.
ER302
User Manual
Version 1.1.0
Page 12 of 13
Nov 2014
Note: For the eReader program please reference the eReader manual.
6. Troubleshooting
No.
fault
solution
1
No sound when power on
If the blue led is not light, plug the USB again
or plug it into another USB port.
2
Blue led not light
when power on
Same with above.
3
Beep all the time when
power on
Reconnect the USB.
4
Can not read the card
Click “Device->Connect”, If connect ok, then
the card maybe bad or is not a mifare card, or
you maybe put the reader on the metal surface.
5
Can read card SN, but
can not read or write
the blocks
You have not the right authenticated keys.
ER302
User Manual
Version 1.1.0
Page 13 of 13
Nov 2014
Note: Remove the film which covers on the label shown as below on the first time
using.
--------------------------------------------------------------------------------------------------------------
Contact Information:
EHUOYAN Technology Co., Ltd.
Tel: +86 -010-59870151
Fax: +86 -010-59754725
Email: info@ehuoyan.com
Web Site: www.ehuoyan.com
Table of contents
Other EHUOYAN Card Reader manuals
