EIM MEGO PPS-1024 User manual

Portable Power Supply
User Manual
MEGO
PPS-1024
EVO-IN-MOTION

This MEGO device belongs to
My Name:
My Contact:

Check your box. A MEGO device is coming along
with the following accessories:
•MEGO device x 1
•Flat-head screw driver x 3
•Micro USB cable (Input) x 1
•USB to Alligator clips (Output) x 1
•USB to DC Jack (Output) x 1
•User manual x 1
MEGO is a portable power supply which can feed
electrical power for low wattage circuits and
electronics. MEGO is capable to generate wide
output DC voltage from 4V to 24V. The device is
also designed to be compatible with standard
breadboards so you are no longer bothered with
the many headache wires on your circuit.
Introducing MEGO
Before your first use
Read the user manual carefully before using
the device
1

2
Getting to know your device
①
②
③ ④
⑤
⑥
⑦
⑧

3
①Output voltage display
②Power push button
③Low battery indicator (amber light)
④Running/charging indicator (blue light)
⑤Output USB connector (has same voltage as ①)
⑥Breadboard power rail connection pins
⑦Voltage polarity of ⑥
⑧Battery lid
⑨Output voltage adjusting knob
⑩Input Micro USB connector for charging the device
⑨
⑩

4
Specifications
Parameter mm (inches)
W 73 (2.87)
L 59 (2.32)
H 32 (1.25)
D 62 (2.44)
E 56 (2.20)
Dimensions
Gross weight: 100g / 3.5oz

5
Electrical Specifications
You can use the standard 5V cellphone charger to
charge MEGO, and it typically takes about 2.5 hours
for MEGO to be fully charged. Charging via laptop
USB port takes longer time since laptop USB ports
source less current
Note

6
How to use the device
To turn ON/OFF the device
To charge the device

7
To adjust the voltage
Low battery indicator: amber light turns on
when MEGO is in low battery condition.
Running indicator: blue light turns on while MEGO
is operating, or the device is being charged
Meaning of the LED indicators

8
To use with a standard breadboard
To power non-breadboard circuits

9
Warnings
•Keep the device out of the reach of
children
•Do not use a cable to connect USB Output
port to USB Input port
•Do not charge your phone if you set
output voltage higher than 5V
•Do not throw or place heavy weights on
the device
•Do not immerse the device in water
•Do not operate the device in wet hands
•Do not operate the device beyond the
range of Operating Temperatures (see
Electrical Spec.)
•Do not disassemble the device unless you
are a trained professional
Note: When connected the alligator clip onto MEGO,
Black terminal is the lower potential (ground) and
Red terminal is the higher potential (output voltage
displayed on the screen)

10
•Refer all servicing to qualified personnel.
Servicing is required when the device has
been damaged in any way
•Do not operate the device near any heat
sources such as radiators, heat registers,
stoves, or other apparatus that produce
heat
•Only use attachments/accessories specified
by the manufacturer
•Do not charge the device during lighting
storms
•Immediately turn off the switch if the
device emits smoke, strange sounds or
other anomalies. Under no circumstances
attempt to repair it yourself. Contact the
retail outlet where the device was
purchased
•While in use, the product may heat up a
little. If the product becomes very hot, stop
using it immediately.
•Do not twist, pull, or squeeze the attached
cables

11
•If damaged, discontinue use. If the
functions alter or the device has been
damaged in any way, please contact the
retail outlet where the device was
purchased.
•Dismantling or repairs must not be
attempted at any time.
•Do not insert raw metal or flammable
objects into the ports.
•If the attached cables become damaged (if
the connection is poor or it breaks),
immediately stop using the device.
Electrocution or fire could occur
•Do not place the cables near a heating
device. It may cause the device enclosure or
components to melt
•Do not leave the device in a car with closed
windows, in direct sunlight, or other places
of extreme heat
•If not using the device for a prolonged
period, turn off the device and disconnect
all attached cables

12
•Ensure the device is set up on a stable
surface.
•Clean only with dry cloth. For stubborn
stains, use a soft cloth dampened with a
weak solution of mild detergent and water.
Dry the device immediately afterwards with
a clean cloth
•This device is not intended for use by
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the device by a person responsible
for their safety

13
Patented Technology
ONE YEAR LIMITED WARRANTY
THIS PRODUCT WARRANTY EXTENDS ONLY TO THE
ORIGINAL CONSUMER PURCHASER OF THE
PRODUCT.
CONDITIONAL UPON NORMAL USE, THIS PRODUCT
IS WARRANTED TO BE FREE FROM DEFECTS IN
MATERIAL OR WORKMANSHIP FOR A PERIOD OF
ONE YEAR FROM THE DATA OF PURCHASE ON
SELLER’S RECEIPT.
THIS WARRANTY SHALL BE INVALID IF THE
PRODUCT IS DEFECTIVE AS A RESULT OF
UNREASONABLE USE, MISUSE, NEGLECT OR OTHER
CAUSES NOT ARISING OUT OF DEFECTS IN
MATERIALS OR WORKMANSHIP. THIS WARRANTY
DOES NOT COVER FAILURE CAUSED BY USERS
CIRCUITRY AND EXPERIMENTAL SETUP.
Invented by Proudly Canadian Company

Contact Us
Website:
www.eimtechnology.com
General Inquiries:
[e-mail]
Technical Related:
[e-mail]
Facebook:
@evoinmotion
Linkedin:
https://www.linkedin.com/company/evoinmotion/