EisSound 52691 User manual

INSTALLATION MANUAL
ENG
In-Wall
Audio Receiver
®

1. Installation
(1) Power Supply Unit (15Vdc, 0,53A)
(2) 4, 8 or 16 ohm Speakers (any brand of speaker permitted)
(3) Bluetooth Audio Receiver (The Module)
0521
15Vdc
1,5W/8ohm
2,5w/4ohm
1,5W/8ohm
2,5w/4ohm
230Vac/15Vdc 0,53A
Front View
Top View
Back View
0521
KINGBT-XXXX
BLUETOOTH
AUDIO
RECEIVER
MOD.
52691 GNDV+
L+ L- R+ R -
Front View
Top View
Back View
0521
KINGBT-XXXX
BLUETOOTH
AUDIO
RECEIVER
MOD.
52691 GNDV+
L+ L- R+ R -
52691 MIN NORMAL MAX NOTES
Measurements
45x45x42 mm exterior (width x height x depth)
45x45x36 mm cavity (width x height x depth)
45x45 mm face coverl (width x height)
Voltage 15 16 Vdc terminal Vdc
Consumption demand 4,5 100 mA bluetooth
4,5 75 mA jack 3,5mm
Input signal 100 mVrms jack 3,5mm
Input impedance 62 Kohms jack 3,5mm
Output signal
power supply 15Vdc/0,53A
2,5 Wrms output 4 ohm
1,5 Wrms output 8 ohm
1 Wrms output 16 ohm
Output signal
power supply 15Vdc/0,8A
5 Wrms output 4 ohm
2,5 Wrms output 8 ohm
1,5 Wrms output 16 ohm
Left/right channel separation 58 dB
Passband 45 20.000 Hz
Distortion 0,1 %
SNR 84 dB
Bluetooth identification number 0000 9.999
Bluetooth spec.
Class2 BT2.1 + EDR
A2DP 1.2
AVRCP 1.4
Wireless transceiver 2,4 GHz
RF Power transmitter 7 dBm
Lenght 10 m
The Module is mounted in a wallbox 45 x 45 mm diameter.
Standard electrical light switch.
Technical
Specifications
Front View Back View Top View
ENG
In-Wall Bluetooth®Audio Receiver Installation Manual

2. Electrical and functional specification
3. Operation
15Vdc
Bluetooth ID
0521
left speaker output
right speaker output
external
audio input
(jack 3,5 mm)
led for
signaling
operating key
A
B
D
E
F
G
Power: the Module is powered from an external power supply
unit. Any 15Vdc power supply unit may be used.
Audio output: the Module provides a stereo audio output
consisting in left and right channels. The audio power supplied is:
External audio input: the Module includes an external audio
input (3,5mm jack). When the user inserts a jack the audio
output switches to the signal from the external audio source
(red led) and overrides the Bluetooth mode.
Operating Key: the Module is provided with a key for
operating the Bluetooth mode.
Led for signaling: the led color for signaling the status of
the Module is as follows:
Blue flashing led = waiting for pairing and connecting
with the Bluetooth device
Blue led = Module is connected to the Bluetooth device
Red led = An external audio input has been inserted
Before commencing any pairing we recommend that
you check that your Bluetooth device has A2DP / AVRC
profiles. In addition, the pairing process can vary between
manufacturers. Please read carefully your Bluetooth device
user manual beforehand. For a successful pairing make
sure the Bluetooth device is close to the Module when
performing this task.
POWER SUPPLY
SPEAKER
4 ohm 8 ohm 16 ohm
15V/0,53A 2,5Wrms 1,5Wrms 1Wrms
15V/0,8A 5Wrms 2,5Wrms 1,5Wrms
Bluetooth
KINGBT-0521 Connected
KINGBT-0414 not connected
KINGBT-0707 not connected
Bluetooth ID: each Module
is identified as KINGBT-
XXXX where XXXX is a serial
number which permits the
user to identify different
Modules that can co-exist
in the same installation. An
adhesive label is provided
with each Module to be fixed
on the face cover. In this way,
the user can choose from his
Bluetooth device the Module
with which he wishes to
stream his music.
3.1. To turn ON / OFF the Module press the operating key for 4”.
0521
4”
Bluetooth Connect
0521
4”
Bluetooth Disconnect
Bluetooth Connect Bluetooth Disconnect
ENG
In-Wall Bluetooth®Audio Receiver Installation Manual

3.2. Once the blue led flashes you are ready to pair.
The Module remains in pairing mode for one minute.
If the Bluetooth device is not connected during this
time, the Module will automatically turn off and you
must repeat the process again.
To pair, go to the Bluetooth settings in your Bluetooth
device (Smartphone, tablet, PC, etc.) and follow the
respective search procedures. The Module will send its
identification code (KINGBT-XXXX) to your Bluetooth
device. This is the moment to pair. This step will only
be necessary the first time for each Bluetooth device.
Now simple connect and play your music Your
Bluetooth device will control all features such as
choosing the song, play, pause, volume…
Once the connection is established the blue led will
stop flashing and remain ON while the Bluetooth
device is being used and within range of coverage
(approx.10 meters).
Connected
Bluetooth
PEUGEOT not connected
KINGBT-0001 not connected
PARROT KIT not connected
Bluetooth
PEUGEOT not connected
KINGBT-0001 connected
PARROT KIT not connected
Turn Off
Bluetooth
PEUGEOT not connected
KINGBT-0001 connected
PARROT KIT not connected
3.3. The Module will
automatically turn OFF 1
minute after you switch off
the Bluetooth setting on
your Bluetooth device or
you distance yourself from
the range of coverage.
Pair
Bluetooth
PEUGEOT not connected
PARROT KIT not connected
KINGBT-0001 not paired
3.4. To pair and connect
a new Bluetooth device
make sure there is no other
device currently connected.
Then repeat the steps 3.1
and 3.2 above.
3.5. Whenever an external
audio source is connected
to the jack input, the
Module automatically turns
ON (red led). The external
audio source overrides the
Bluetooth mode.
0521
External audio input
ENG
In-Wall Bluetooth®Audio Receiver Installation Manual
Connect

FCC Compliance Statement
1. FCC ID: 2AB6X52691.
The information about the Bluetooth audio receiver is on file with the FCC and can be found
under the display grant section of http://www.fcc.gov/oet/ea/fccid after searching on FCC ID:
2AB6X52691
2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause
undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
ENG
In-Wall Bluetooth®Audio Receiver Installation Manual