Eizo UX2 User manual
1
Instructions for Use
Calibration Sensor
Important
Please read this “Instructions for Use” carefully to familiarize yourself with safe and effective
usage.
Please retain this manual for future reference.
2
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read
them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can
be life threatening.
Indicates a prohibited action. Indicates a mandatory action.
Symbols on the unit
Direct current
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.
EIZO, the EIZO Logo and RadiCS are registered trademarks of EIZO Corporation in Japan and other countries.
All other company and product names are trademarks or registered trademarks of their respective owners.
3
PRECAUTIONS
WARNING
If an abnormal phenomenon, such as smoke, strange noise(s), or odor(s), is detected,
immediately disconnect the product from the monitor or computer, and contact your
EIZO representative.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in re, electric shock, or burn.
Refer all servicing to qualied service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in re,
electric shock, or equipment damage.
Do not use the product near equipment that is vulnerable to magnetic elds.
Magnets are used in this product. If the product is used near the equipment shown below,
normal operations may be interrupted or records may be damaged due to magnetic elds.
• Precision equipment
• Magnetic storage media such as magnetic cards, prepaid cards, and tickets
• Electronic or communication equipment such as speakers, CD or DVD players, and mobile phones
Dispose of the products in accordance with the laws and regulations of your region.
4
Introduction
This product is a sensor that is used to perform calibration, Luminance checks, Grayscale checks, and other
operations using RadiCS monitor quality control software. For information on how to use RadiCS, refer to
the RadiCS User's Manual.
Package Contents
Check that all the following items are contained in the package. If any items are missing, contact your
EIZO representative.
• UX2 Sensor
(Including a magnet with a band and adsorptive
sheet)
• Protective cap*1
• Storage case
• Adsorptive sheet for the replacement
• Cleaning cloth
• Instructions for Use (this book)
• "RadiCS" quality control software*2
*1 This product is attached to the UX2 Sensor at the time of shipment.
*2 Only available when you purchase RadiCS UX2.
Compatible Monitors
This product is provided specically for the EIZO RadiForce series monitor. Usage with a monitor that is
not compatible may not be covered by the warranty.
For details on the compatible monitors, refer to our web site. http://www.eizoglobal.com/
5
Precautions for Use
• Measurement accuracy may be compromised if the product is subjected to excessive
impact, such as by being dropped, etc.
If the product has been subjected to a strong impact, we recommend that you carry out
calibration.
• Measurement accuracy may be compromised if the product is stored or used in the
following environments.
- Location subject to direct sunshine
- Location containing dust
- Location in which corrosive gases (dioxide gas, hydrogen sulde gas, nitrogen dioxide
gas, chlorine, ammonia, ozone, etc.) do or may exist
- Location in which substances (sodium chloride, sulfur, etc.) that cause corrosion exist in
dust or air
• If you place this product in a room while the product is cold, or if you raise the room
temperature abruptly, dew may form on the surface or inside the product (condensation).
Should dew form, please wait until it has disappeared before connecting the product. If
you use the product while dew is still on it, a malfunction may occur.
Table of contents
Other Eizo Accessories manuals
