Eizo DuraVision FDF2711W-IP User manual

Important
Please read this “Instruction Manual”, “Installation Manual”, and
“Setup Manual” carefully to familiarize yourself with safe and
e󰀨ective usage.
•For the latest product information including the “Instruction
Manual”, refer to our web site :
www.eizoglobal.com
Color LCD Monitor
Instruction Manual
Software Version 5.3

Related Manuals
Setup Manual Describes precautions and procedures for connecting network cameras and for
displaying camera images on the monitor. (Installation and initialization guidance)
Installation Manual*1 Describes network camera registration, function settings, and system settings.
(Detail settings guidance)
Instruction Manual
(this manual)*1 Describes operation of live image screen menus. (Operation guidance)
*1 The Instruction Manual and Installation Manual for the latest software version used can be obtained from our
web site. Select “Manuals” from “Support”, enter “FDF2711W-IP” in the “Enter model name” box, and click
“Search”.
www.eizoglobal.com
Installation of Adobe®Acrobat®Reader®is required.
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
e󰀨ort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
2

Cleaning
The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with
water.
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet
or LCD panel, and also quality deterioration of the image.
• Never use thinner, benzine, wax, or abrasive cleaner as they may damage the cabinet or LCD panel surface.
Note
• It is recommended that ScreenCleaner (available as an option) be used to clean the cabinet and LCD panel
surface.
To use the monitor comfortably
• An excessively dark or bright screen may a󰀨ect your eyes. Adjust the brightness of the monitor
according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
3

4CONTENTS
CONTENTS
Cleaning .................................................................... 3
To use the monitor comfortably ............................. 3
CONTENTS ............................................................. 4
Chapter 1 Product Overview ............................. 5
1-1. System Conguration .................................. 5
Chapter 2 Turning On / O󰀨 the Power .............. 6
2-1. Turning On the Power ................................... 6
2-2. Turning O󰀨 the Power ................................... 6
Chapter 3 Operating the System ...................... 7
3-1. Live Image Screen ........................................ 7
●Basic menu operations.................................... 8
3-2. Logging In .....................................................10
3-3. Setting Screen Display ................................12
●To change over the screen layout ..................12
●To change over the page displayed on
the screen.......................................................13
●To switch camera image display positions.....14
3-4. Operating Network Cameras ......................15
●Before operation.............................................15
●To operate network cameras .........................16

5
Chapter 1 Product Overview
Chapter 1 Product Overview
This product is a color LCD monitor capable of displaying images from a maximum of 32 network cameras*1.
*1 A type of camera which converts images into network signals and transmits the signals.
1-1. System Conguration
Network camera*1
Network hub
Product main unit
Ethernet
*1 Up to 48 network cameras can be registered.

6Chapter 2 Turning On / O󰀨 the Power
Chapter 2 Turning On / O󰀨 the Power
2-1. Turning On the Power
1. Turn on the main power switch on the back of the monitor.
The main power switch is turned on by factory settings.
2.
Press on the front of the monitor.
The power indicator lights up blue and the live image screen is displayed.
(For details on the live image screen, refer to “3-1. Live Image Screen” (page 7).)
Attention
• It takes approximately one minute for the live image screen to be displayed after the main power is turned on. (A
rotating bar indicating startup is displayed.) Do not turn o󰀨 the monitor during startup.
• When there are no registered network cameras, the “Not Registered” message is displayed in the network
camera image display area.
2-2. Turning O󰀨 the Power
1. Turn o󰀨 the main power switch on the back of the monitor.

7
Chapter 3 Operating the System
Chapter 3 Operating the System
This product can be operated using a USB mouse, USB keyboard, or joystick.
This chapter describes operation using a USB mouse.
Attention
• Please connect a USB mouse, USB keyboard, or joystick to the USB downstream port in advance.
3-1. Live Image Screen
Turn on the power to the monitor to display images from the network camera(s). Menus are displayed
around the image.
Press to hide the menus and display a full-screen image. To display the menus again, click any place
on the screen.
Live Image Screen
(Image only)
Live Image Screen
(Image and menu)
Note
• This switching can be executed from the Web browser. For information on operation from a Web browser, refer to
the “Installation Manual”.

8Chapter 3 Operating the System
●Basic menu operations
The menu is used to set display settings of the image display area and to set the settings of the
system and network cameras.
Screen Layout
Display mode menu Current time
Image display area
• When no camera is registered, a “Not Registered” message is displayed.
• When an input signal is not supported, the “Unsupported Resolution” message is displayed.
System menu / Camera control menu
Attention
• When sequence display is enabled, the camera control menu is inoperable.

9
Chapter 3 Operating the System
Display mode menu
Camera images displayed on the live screen can be operated. With the Enterprise edition, the icons
displayed can be changed from the setting screen. For details, see the “Installation Manual”.
Display mode menu
(Default settings) Shortcut key Details
F Displays or hides the menu.
L Changes the display layout of the images.
S
Turns the sequence function (function that switches
the pages to be displayed on the image display area at
regular intervals) on or o󰀨.
PageDown / PageUp Switches the pages to be displayed on the image
display area.

10 Chapter 3 Operating the System
3-2. Logging In
Attention
• The operable range di󰀨ers according to the user account level for accessing this product.
Levels include “LIVE”, “CAMERA CONTROL”, and “ADMIN”. The operable range for each level is as shown below.
(√: Operable, -: Inoperable)
Operation
Level Display mode menu
System menu Switching camera
image display
positions
Login operation System settings
LIVE √ √ - -
CAMERA CONTROL √ √ - -
ADMIN √ √ √ √
• When the power is turned on and after logo󰀨, the user level is “LIVE”.
• For information on setting user levels, refer to the “Installation Manual”.
1. Select (Login).
The login screen is displayed.
2. Enter “Username” and “Password”.
Please contact the system administrator about the username and password.
Note
• When the “Account Type” is set to “LDAP”, you can temporarily change the account type when logging in by
checking “Allow choosing of account type on the login dialog.” under “LDAP” in advance.